RBOT Vicarious Surgical Inc

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

☒ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2024

OR

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from                       to                      

Commission File Number: 001-39384

VICARIOUS SURGICAL INC.

(Exact name of registrant as specified in its charter)

617-868-1700

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports) and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant (1) has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files) and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☒

The aggregate market value of the registrant’s voting and non-voting equity held by non-affiliates of the registrant (without admitting that any person whose securities are not included in such calculation is an affiliate) computed by reference to the price at which the Class A common stock was last sold as of June 30, 2024, the last business day of the registrant’s most recently completed second fiscal quarter, was approximately $30.1 million.

As of March 11, 2025, the registrant had 5,276,612 shares of Class A common stock outstanding and 653,990 shares of Class B common stock outstanding.

TABLE OF CONTENTS

DOCUMENTS INCORPORATED BY REFERENCE

EXPLANATORY NOTE

In this Annual Report on Form 10-K, the terms “we,” “us,” “our,” the “Company” and “Vicarious Surgical” mean Vicarious Surgical Inc. (formerly D8 Holdings Corp. (“D8”)) and our subsidiaries. We were incorporated in the Cayman Islands on May 6, 2020. The Company’s legal name became Vicarious Surgical Inc. following a business combination between the Company and Vicarious Surgical Inc. (“Legacy Vicarious”) on September 17, 2021 (the “Business Combination”).

On June 12, 2024, we effected a 1-for-30 reverse stock split (“Reverse Split”) of our issued and outstanding shares of Class A and Class B common stock. The Reverse Split did not change the number of authorized shares of Class A and Class B common stock. No fractional shares were issued in connection with the Reverse Split. Each stockholder who would have otherwise been entitled to receive a fraction of a share of our common stock was entitled to receive cash. All references in this Annual Report on Form 10-K to shares, share prices, exercise prices, and other per share information in all periods have been adjusted, on a retroactive basis, to reflect the Reverse Split (see Note 11, “Stockholders’ Equity and Stock-Based Compensation – Reverse Stock Split” in our financial statements contained in this Annual Report on Form 10-K).

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K includes forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), that relate to future events, our future operations or financial performance, or our plans, strategies and prospects. These statements are based on the beliefs and assumptions of our management team. Although we believe that our plans, intentions and expectations reflected in or suggested by these forward-looking statements are reasonable, we cannot assure that we will achieve or realize these plans, intentions or expectations. Forward-looking statements are inherently subject to risks, uncertainties and assumptions. Generally, statements that are not historical facts, including statements concerning possible or assumed future actions, business strategies, events or performance, are forward-looking statements. These statements may be preceded by, followed by or include the words “believes,” “estimates,” “expects,” “projects,” “forecasts,” “may,” “will,” “should,” “seeks,” “plans,” “scheduled,” “anticipates” or “intends” or the negative of these terms, or other comparable terminology intended to identify statements about the future, although not all forward-looking statements contain these identifying words. The forward-looking statements are based on projections prepared by, and are the responsibility of, our management team. Forward-looking statements contained in this Annual Report on Form 10-K include, but are not limited to, statements about:

These forward-looking statements are based on information available as of the date of this report, and current expectations, forecasts and assumptions, and involve a number of judgments, risks and uncertainties. Important factors could cause actual results, performance or achievements to differ materially from those indicated or implied by forward-looking statements such as those described under the caption “Risk Factors” in Item 1A of Part I of this Annual Report on Form 10-K, elsewhere herein and in other filings that we make from time to time with the Securities and Exchange Commission. The risks described under the heading “Risk Factors” are not exhaustive. New risk factors emerge from time to time, and it is not possible to predict all such risk factors, nor can we assess the impact of all such risk factors on our business or the extent to which any factor or combination of factors may cause actual results to differ materially from those contained in any forward-looking statements. Forward-looking statements are not guarantees of performance. You should not put undue reliance on these statements, which speak only as of the date hereof. All forward-looking statements attributable to us or persons acting on our behalf are expressly qualified in their entirety by the foregoing cautionary statements. We undertake no obligations to update or revise publicly any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law.

SUMMARY OF RISK FACTORS

We are providing the following summary of the risk factors contained in this Annual Report on Form 10-K to enhance the readability and accessibility of our risk factor disclosures. The risk factors described below are a summary of the principal risk factors associated with an investment in us. These are not the only risks we face. You should carefully review the full risk factors contained in this Annual Report on Form 10-K in their entirety for additional information regarding the material factors that make an investment in our securities speculative or risky. These risks and uncertainties include, but are not limited to, the following:

PART I

ITEM 1. BUSINESS.

The following discussion reflects the business of Vicarious Surgical, as currently embodied by Vicarious Surgical. Unless the context otherwise requires, all references in this section to the “Company”, “we”, “us” and “our” generally refer to Vicarious Surgical in the present tense or Vicarious Surgical from and after the Business Combination.

Overview

We are combining advanced miniaturized robotics, computer science, sensing and 3D visualization to build a new category of intelligent and affordable single-port surgical robots that virtually transport surgeons inside the patient to perform minimally invasive surgery. With our next-generation robotics technology, which is being designed with proprietary human-like motion, we are seeking to improve patient outcomes, as well as the cost and efficacy of surgical procedures. Led by a visionary team of engineers from MIT, we intend to deliver the next generation in robotic surgery, designed to solve the shortcomings of both open surgery, as well as current manual and robot-assisted minimally invasive surgery.

Our single-port surgical robot, called the Vicarious Surgical System, is uniquely designed to overcome the deficiencies that have limited broad adoption of robot-assisted minimally invasive surgery to date. By fundamentally engineering a better solution, we believe we have created a more capable surgical robot than those currently available on the market, and if authorized by the FDA, the Vicarious Surgical System will offer surgeons the ability to perform surgical procedures with greater dexterity and greater access to the entire abdomen, with better visibility and sensor-based feedback, through a small single incision in the abdomen. The Vicarious Surgical System features proprietary “de-coupled” actuators, which are intended to enable a cascade of benefits, including improved robotic mobility, reduced size, improved functionality and lower materials costs. If authorized by the FDA, the Vicarious Surgical System is designed to enable surgeons to perform procedures inside the abdomen with human-equivalent motion, with a full nine degrees of freedom per robotic arm, providing an experience that is more natural, and more akin to the surgeon’s own upper body movements. In surgical procedures conducted on cadavers, the Vicarious Surgical System provides exceptional reach within the abdomen, and if authorized by the FDA, it will enable the surgeon to enter the abdomen from nearly any angle and work in nearly any direction, without having to triangulate to the surgical area from multiple incisions or to operate only within the limited area directly in front of a single incision. The Vicarious Surgical System is designed to provide exceptional visualization, with a high-performance, stereoscopic camera that rotates in three degrees of freedom (yaw, pitch, and roll) to provide the surgeon with stereoscopic imaging of nearly every surface in the abdomen. The Vicarious Surgical System also contains 28 sensors per instrument arm, which allows the system to provide real-time feedback to the surgeon on force, motion and other data that are intended to enhance surgical procedures and patient outcomes.

The Vicarious Surgical System is being developed to provide attractive advantages to hospitals and ambulatory surgical centers, or ASCs, which we believe will drive rapid and widespread adoption. Unlike the large footprints of legacy surgical robotic systems that require a construction build-out and a dedicated operating room, the Vicarious Surgical System is mobile and much smaller and could be easily moved to any operating room throughout a medical facility. We anticipate that, if authorized by the FDA, the smaller size and advanced engineering of the Vicarious Surgical System and related disposable instruments will be offered at a cost-effective price point compared to existing legacy robotic systems. Hospitals and ASCs would not be required to dedicate permanent space and would reduce expenses relating to sterilization and operating room turnover. We believe that, if authorized by the FDA, adoption of the Vicarious Surgical System could be facilitated by a streamlined training regimen, where surgeons will be able to develop proficiency much more quickly than for legacy robotic systems. This is due to the design features of the Vicarious Surgical System, such as the ease of use and more natural, human-equivalent motion of the Vicarious Surgical System, the reduced surgeon burden during setup, and the fact that the Vicarious Surgical System would not be confined to a dedicated operating suite and therefore could have more availability for training purposes. In addition, with its increased capability and dexterity, the Vicarious Surgical System is designed to enable many procedures to be performed faster and more effectively, with less injury and risk to the patient, significantly reducing overall healthcare costs. Because the Vicarious Surgical System has not yet been authorized by the FDA or commercialized, the intended advantages of the Vicarious Surgical System have not yet been realized and are dependent upon the successful development of the Vicarious Surgical System and a timely authorization by the FDA.

We estimate that there are 45 million soft tissue abdominal and gynecological surgical procedures performed annually worldwide that could be addressed with the Vicarious Surgical System, including use for ventral hernia, other types of hernia, hysterectomy, cholecystectomy (gall bladder) and certain other gastrointestinal procedures. We intend for use in ventral hernia procedures to be the first clinical application for the Vicarious Surgical System, of which there are estimated to be 3.9 million cases worldwide and 0.9 million in the U.S. annually. We then intend to seek FDA authorization to enable the expansion into the other applications addressable by the Vicarious Surgical System.

Industry Background

Despite the advancements in manual and robot-assisted minimally invasive surgery over the last 40 years, of the estimated 45 million annual worldwide procedures addressable by the Vicarious Surgical System, it is estimated that more than 50% are currently performed by open surgery and less than 5% are performed by existing robot-assisted minimally invasive surgery technologies today. The large incisions required for open surgery, while allowing the surgeon to see with their own eyes and operate with their own hands, create significant trauma to the patient, resulting in long hospitalization and recovery times, high hospitalization costs, as well as significant pain and suffering. Due to the significant trauma to the patient associated with open surgery, 15% to 20% of such surgeries result in tissue or internal organs pushing through the muscle into the abdomen, or incisional hernias, caused by the operation, requiring additional complex surgery to correct. Although there have been significant improvements in minimally invasive surgery procedures over open surgery, the following limitations associated with minimally invasive surgery still exist:

We believe this slow adoption of robot-assisted surgery has occurred because of several factors, including the following:

The Vicarious Surgical System

The single-port Vicarious Surgical System with advanced, miniaturized robotics and exceptional visualization is designed to address the significant limitations of open surgery and existing single- and multi-port robotic surgical approaches and intended to improve patient outcomes and enhance adoption by hospitals and other medical facilities. The Vicarious Surgical System is designed with a fundamentally different architecture, and proprietary “de-coupled actuators,” to overcome many of the limitations of open surgery or existing robot-assisted surgical procedures with a minimally invasive and more capable robotic system. This architecture enables unprecedented dexterity inside the abdomen through an ultra-thin support tube, providing significant improvement over existing legacy robotic systems and minimizing the complications and trauma associated with open surgery. The Vicarious Surgical System has not yet been authorized by the FDA. We have had pre-submission meetings with the FDA to align on our regulatory strategy and plan to file a De Novo classification application with the FDA for use in ventral hernia procedures as our first indication.

The Vicarious Surgical System consists of the following components:

Vicarious Surgical System Advantages

We believe that to overcome the issues that have limited broad adoption of robot-assisted minimally invasive surgery procedures to date: cost, size, capability, ease of use, fast setup, high throughput, and a lack of streamlined training, it is imperative to provide a solution that addresses all these concerns. The Vicarious Surgical System, with its advanced engineering and “de-coupled actuators,” which enable a revolutionary approach to the development of surgical robotics, is designed to be uniquely able to significantly improve upon each of these factors. Because of its proprietary engineering advantage, the Vicarious Surgical System is designed to offer more degrees of freedom and dexterity with which the surgeon can more naturally operate, and to provide greater visibility, sensing and functionality to the surgeon, all through a small, single port that is designed to offer more capability and fewer challenges than any single or multi-port surgical modality available. Because the Vicarious Surgical System had not yet been authorized by the FDA or commercialized, the intended advantages of the Vicarious Surgical System have not yet been realized and are dependent upon the successful development of the Vicarious Surgical System and a timely authorization by the FDA.

Our Strategy

With revolutionary advancements in design, we seek to democratize surgery through widespread access to a more capable and more affordable surgical robotic platform. Our objective is to become the leading provider of surgical robotic platforms for soft tissue surgery. To achieve this objective, we are pursuing the following business strategies, all of which are dependent upon the receipt of FDA authorization:

Historical Development of the Vicarious Surgical System and Regulatory Pathway

The technology for our robot was developed by Legacy Vicarious founders Adam Sachs, Sammy Khalifa, and Barry Greene between 2009 and 2015. After considerable prototyping and experimentation, the team discovered and patented a cable pathway through the robotic arm to fully de-couple the motion of the robotic device. This series of innovations enabled the first successful prototype of a complete robotic arm that resembles the motion of the surgeon’s body. The founding team went on to take this design and create a full prototype of the device, machining the parts themselves and funding the project out of pocket. After the first fully functioning robotic arm was created, integrated with software designed by the Legacy Vicarious founders, as well as a surgeon input tracking system, the founding team was able to raise outside capital and successfully grow the team in order to continue to drive development and growth.

We have conducted, and continue to conduct, several cadaver studies with the prototype Vicarious Surgical System. The goal of each study was to refine the performance of the Vicarious Surgical System. In these cadaver studies, the Vicarious Surgical System prototype was used to perform several ventral hernia repair procedures, hysterectomy procedures and cholecystectomy procedures. In addition, in these cadaver studies, surgeons have used the Vicarious Surgical System prototype to perform various techniques for ventral hernia repair, including robotic transabdominal preperitoneal, or rTAPP, retrorectus, and intraperitoneal onlay mesh repair (IPOM) plus. These studies were used to gather insights regarding:

In November 2019, we received FDA Breakthrough Device designation for a prior prototype version of the Vicarious Surgical System with a proposed indication for use in ventral hernia repair procedures. The Vicarious Surgical System is considered a Class II medical device. We have had pre-submission meetings with the FDA to align on our regulatory strategy and plan to file a de novo application with the FDA for use in ventral hernia procedures as our first indication.

A preliminary meeting with the FDA was conducted in December 2021 to discuss with the FDA our decision to make two technology changes to the Vicarious Surgical System design that was granted Breakthrough Device designation in November 2019. Based on these changes, the FDA has determined that the current Vicarious Surgical System design that is planned for the initial limited launch and was submitted to the FDA in the November 2021 FDA pre-submission meeting request is different from the device that was granted Breakthrough Device designation for the device design filed in November 2019. The FDA stated that the Breakthrough Device designation remains active for the prior device design granted Breakthrough Device designation in November 2019. In the future, we may attempt to reincorporate the technologies from such prior device design to leverage the previously granted Breakthrough Device designation. The process of medical device development is inherently uncertain and there is no guarantee that a Breakthrough Device designation will be granted to a different device design, and if it were granted, there is no guarantee that such designation will accelerate the timeline for authorization or make it more likely that the Vicarious Surgical System will be authorized by the FDA.

In February 2022, a pre-submission meeting was held with the FDA to gain alignment on the current Vicarious Surgical System. Feedback provided by the FDA indicated that each robotic-assisted surgical system has distinctive kinetics, connections, data transmission and interfaces, including interfaces for the user, patient and environment, the combination of which composes a unique and multifaceted system. Additionally, the FDA indicated that each robotic-assisted surgical system has unique inputs and outputs and must account for uncertainty and instability in different ways. Taken together, these different technological characteristics raise different questions of safety or effectiveness that are not applicable to a predicate device and may pose a significant safety or effectiveness concern for the Vicarious Surgical System. For example, the way that a robotic-assisted surgical system is constructed and implemented will have a direct bearing on the safety and effectiveness profile of the device and different robotic-assisted surgical systems are not sufficiently similar to allow for meaningful comparison between the Vicarious Surgical System and predicate robotic-assisted surgical systems. The FDA indicated that the evaluation of the complex Vicarious Surgical System requires a holistic approach of the performance testing, such as software, bench, animal, human factors and usability, and clinical data to determine how each element establishes the Vicarious Surgical System’s integration approach to the intended use and more specifically the indicated procedures. Therefore, each robotic-assisted surgical system carries new or different risks and an evaluation of these risks will require an independent evaluation of the safety and effectiveness of the Vicarious Surgical System due to the technology and the implementation into the clinical care. Based on this feedback, the FDA has determined that a 510(k) submission would likely be found not substantially equivalent to a predicate robotic-assisted surgical system. In accordance with this FDA feedback, we have revised our regulatory roadmap for market authorization, as discussed below.

In February 2024, we submitted an application to the FDA seeking acceptance into its Safer Technologies Program (“the STeP Program”). The FDA has accepted Vicarious Surgical’s robotic system, intended to assist in visualization and control of endoscopic instruments during ventral hernia repair procedures in adults, into the STeP Program. This acceptance means the device meets STeP eligibility criteria, but it does not change requirements for IDE or marketing authorization, nor does it guarantee future approval. Through the STeP Program, we can utilize available feedback mechanisms that prioritize interactive and timely communications with the FDA. The STeP Program expedites the development of devices and offers program-specific feedback mechanisms, including early engagement on Data Development Plans (“DDPs”) for aligning on necessary safety evidence, “sprint discussions” with FDA experts to address development challenges, and potential senior management engagement for discussing high-level strategic issues. In addition, general FDA feedback mechanisms like the Q-Submission Program (including Pre-Submissions and Informational Meetings) continue to be available to us.

Regulatory Roadmap for Market Authorization

Based on the outcome of the pre-submission meeting with the FDA in February 2022, the FDA determined that there is no legally marketed predicate device. Therefore, we will plan to file a De Novo classification request for the proposed initial indication for use in ventral hernia repair procedures as a regulatory pathway to classify the Vicarious Surgical System. Devices that are classified into Class I or Class II through a De Novo classification request may be marketed and used as predicates for future premarket notification (or 510(k)) submissions, when applicable. Accordingly, we believe that the 510(k) pathway will be available as a regulatory pathway for the Vicarious Surgical System with respect to future indications or other significant modifications to the device system.

We plan to conduct a prospective human pivotal clinical investigation under an FDA Investigational Device Exemption (IDE) to evaluate the safety, effectiveness, and performance of the Vicarious Surgical System to support a De Novo classification request and obtain U.S. marketing authorization for the proposed indication for use in ventral hernia repair procedures. In addition to conducting a human pivotal clinical investigation, we plan to conduct non-clinical testing activities to verify and validate the safety, performance, effectiveness, functionality, usability and reliability characteristics of the Vicarious Surgical System with respect to the intended use and defined requirements. A verification and validation process is expected to provide the necessary data to submit to the FDA for IDE approval.

We expect that non-clinical verification and validation testing will be conducted to verify and validate that the Vicarious Surgical System meets all design specifications for its intended use. These tests will include in vitro, simulated clinical bench testing and cadaver studies, as well as in vivo animal studies to support and demonstrate the safety, performance, effectiveness, functionality, usability, and reliability characteristics of the Vicarious Surgical System with respect to the intended use and defined requirements. Cadaver studies, representing realistic dimensions and contours of the human abdominal space, will be used primarily to verify and validate system functionality, performance, and safety relevant to patient anatomy and contexts of use with respect to insertion, access and movement within the abdominal cavity, visualization, manipulating tissue, cutting, and suturing as needed during a simulated ventral hernia repair procedure. Animal studies will be used primarily to demonstrate performance, safety, efficacy, and usability of the system as relevant to a live model with respect to insertion, access and movement within the abdominal cavity, visualization, manipulating tissue, cutting, coagulating, and suturing, during a simulated ventral hernia repair procedure. This testing may also be used to demonstrate that applicable risk mitigation features, including software alarms, alerts, extraction of multi-jointed instrumentation in case of system failure, misuse, or other errors are adequate and perform to specifications. Summative usability testing will be conducted by surgeons, nurses and technicians in a simulated operating room environment to provide objective evidence that the Vicarious Surgical System can be used safely and effectively by end users for its intended uses, the device functions as expected and intended, and all risk mitigations implemented are safe and effective. In addition, we plan to conduct simulated bench-top testing on transparent anatomical models to evaluate, among other things, how the Vicarious Surgical System performs in “worst case” scenarios to verify and validate safe anatomical access, instrument/camera angulation and movement at the extremes of various surgical procedures with respect to patient anatomy and dimensions that cannot be readily controlled for when using live animal and human cadaver models.

Future Indications

We plan to expand upon our claims and/or indication for use to address additional unmet clinical needs in different anatomical areas as well as therapeutic procedures. Following the initial authorization for use in ventral hernia repair procedures under a De Novo classification, if obtained by the FDA, we plan to submit 510(k) premarket notifications for other indications for use, using the Vicarious Surgical System’s first De Novo authorization as a predicate, along with other predicate devices with similar cleared indications for use. We may also include a predetermined change control plan in our De Novo classification, or future premarket notification submissions, which if authorized by the FDA, would allow us to implement the modifications to the Vicarious Surgical System described in the plan without submitting a new application for marketing authorization. We have identified several potential future indications and procedures that align well with the Vicarious Surgical System’s ability to access and visualize the abdominal cavity. Possible future indications may include but not be limited to inguinal and hiatal hernias, hysterectomy, cholecystectomy (gallbladder), colorectal and other gastrointestinal procedures. We will perform an assessment to determine the appropriate regulatory strategy required to expand claims and obtain applicable regulatory clearances in the United States and in other global markets.

Intellectual Property

We strive to protect and enhance the proprietary technology, inventions and improvements that are important to our business by seeking, maintaining and defending our intellectual property, all of which has been developed internally and not in-licensed from third parties. We also rely on trade secrets, know-how, continuing technological innovation and in-licensing opportunities to develop, strengthen and maintain our proprietary position in the field of surgical robotics. Additionally, we intend to rely on regulatory protection afforded through data exclusivity and market exclusivity as well as patent term extensions, where available.

We currently do not rely heavily on technologies from third parties. However, in the future, we may need to rely or be dependent on patented or proprietary technologies that we may license from third parties.

We maintain a patent portfolio that includes issued U.S. and foreign patents as well as pending U.S. and foreign patent applications, which include claims directed towards our proprietary technology. We intend to pursue additional intellectual property protection to the extent we believe it would be beneficial and cost-effective. As of January 27, 2025, we owned approximately thirteen (13) issued U.S. utility patents and approximately nineteen (19) issued utility patents in foreign jurisdictions, including five (5) in China, five (5) in Japan, and nine (9) in European jurisdictions. We also had approximately 144 pending utility patent applications in the U.S. and foreign jurisdictions, including in Canada, China, Europe, Japan, and Hong Kong, and approximately two (2) U.S. design patent applications. These issued utility patents and pending utility patent applications (if they were to issue as patents) have expected expiration dates ranging between 2035 and 2044. Our patents and patent applications are directed to, among other things, our core technology. This includes the surgical robotic and camera system; sensing capabilities, controls and visualization interfaces; the surgical tools suite; and related technologies.

The term of individual patents may vary based on the countries in which they are obtained. Generally, patents issued for applications filed in the United States are effective for 20 years from the earliest effective non-provisional filing date. In addition, in certain instances, a patent term can be extended to recapture a portion of the term effectively lost as a result of the FDA regulatory review period. The restoration period cannot be longer than five years and the total patent term, including the restoration period, must not exceed 14 years following FDA approval. The duration of patents outside of the United States varies in accordance with provisions of applicable local law, but typically is also 20 years from the earliest effective filing date.

In addition to patents and patent applications, we rely on trade secrets and know-how to develop and maintain our competitive position. However, trade secrets can be difficult to protect. We seek to protect our proprietary technology and processes, and obtain and maintain ownership of certain technologies, in part, through confidentiality agreements and invention assignment agreements with our employees, consultants, scientific advisors, contractors and commercial partners. We also seek to preserve the integrity and confidentiality of our data, trade secrets and know-how, including by implementing measures intended to maintain the physical security of our premises and the physical and electronic security of our information technology systems.

Our future commercial success depends, in part, on our ability to obtain and maintain patent and other proprietary protection for commercially important technology, inventions and know-how related to our business; defend and enforce our patents; preserve the confidentiality of our trade secrets; and operate without infringing the valid enforceable patents and proprietary rights of third parties. Our ability to stop third parties from making, using, selling, offering to sell or importing our product candidates will depend on the extent to which we have rights under valid and enforceable patents or trade secrets that cover these activities. Moreover, we may be unable to obtain patent protection for the Vicarious Surgical System generally, as well as with respect to certain surgical indications. See the section entitled “Risk Factors — Risks Related to Our Intellectual Property” for a more comprehensive description of risks related to our intellectual property.

Research and Development

As of January 24, 2025, our research and development programs are generally pursued by our 61 engineering, scientific and technical personnel employed by us in our offices in Massachusetts on a full-time basis or as consultants, or through partnerships with industry leaders in manufacturing and design and with researchers in academia. We are also working with subcontractors in developing specific components of our technologies.

The primary objectives of our research and development efforts are to continue to introduce incremental enhancements to the capabilities of the Vicarious Surgical System and to advance development.

For the fiscal years ended December 31, 2024 and 2023, we incurred research and development expenses of $40.2 million and $47.6 million, respectively.

Manufacturing

We have expanded our manufacturing capabilities with the development of a manufacturing facility, including a clean room, within our headquarters in Waltham, Massachusetts, and have hired key manufacturing personnel. We currently rely, and expect to continue to rely, on third parties for the manufacturing of certain products for preclinical and clinical testing, as well as for commercial manufacturing.

We purchase both custom and off-the-shelf components from a large number of suppliers and subject them to stringent quality specifications and processes. Some of the components necessary for the assembly of the Vicarious Surgical System are currently provided to us by sole-sourced suppliers or single-sourced suppliers.

We are committed to developing an ethical, safe and sustainable supply chain. This extends to our supplier base as well, so we are seeking partnerships with suppliers who share our commitment to strong ethics and full compliance with all applicable laws.

We promote the following basic principles in our supply chain:

Competition

We face competition in the forms of existing open surgery, conventional minimally invasive surgery, drug therapies, radiation treatment, and emerging interventional surgical approaches. Our success depends on continued clinical and technical innovation, quality and reliability, as well as educating hospitals, surgeons, and patients on the results associated with robotic-assisted surgery using the Vicarious Surgical System and our value proposition relative to other techniques. We also face competition from several companies that have introduced or are developing new approaches and products for the minimally invasive surgery market. We believe that the entrance or emergence of competition validates robotic-assisted surgery.

We face competition from larger and well-established companies. The companies that have introduced products in the field of robotic-assisted surgery or have made explicit statements about their efforts to enter the field, include, but are not limited to: Intuitive Surgical, Inc.; Johnson & Johnson (including their wholly-owned subsidiaries Ethicon Endo-Surgery, Inc., Auris Health, Inc. and Verb Surgical Inc.); Medtronic plc (including their wholly-owned subsidiary Covidien LP); Virtual Incision Corporation; Stryker Corporation; and CMR Surgical Ltd. Other companies with substantial experience in industrial robotics could potentially expand into the field of surgical robotics and become a competitor. In addition, research efforts utilizing computers and robotics in surgery are underway at various companies and research institutions. Our ability to generate future revenue may be adversely impacted as competitors announce their intent to enter these markets and as our potential customers anticipate the availability of competing products.

Commercialization

We have not yet established a sales or product distribution infrastructure for the Vicarious Surgical System. We plan to access the U.S. market with the Vicarious Surgical System through strategic partnerships and also develop our own focused, specialized sales force or distribution channels once we have commercialized the Vicarious Surgical System.

Government Regulation

Our operations are subject to comprehensive federal, state, and local laws and regulations in the jurisdictions in which we or our research and development partners or affiliates do business. The laws and regulations governing our business and interpretations of those laws and regulations are subject to frequent change. Our ability to operate profitably will depend in part upon our ability, and that of our research and development partners and affiliates, to operate in compliance with applicable laws and regulations. The laws and regulations relating to medical products and healthcare services that apply to our business and that of our partners and affiliates continue to evolve, and we must, therefore, devote significant resources to monitoring developments in legislation, enforcement, and regulation in such areas. As the applicable laws and regulations change, we are likely to make conforming modifications in our business processes from time to time. We cannot provide assurance that a review of our business by courts or regulatory authorities will not result in determinations that could adversely affect our operations or that the regulatory environment will not change in a way that restricts our operations.

FDA Regulation

Medical devices are strictly regulated by the FDA in the United States. Under the Federal Food, Drug, and Cosmetic Act (“FDCA”), a medical device is defined as “an instrument, apparatus, implement, machine, contrivance, implant, in vitro reagent, or other similar or related article, including a component, part or accessory which is, among other things: intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation, treatment, or prevention of disease, in man or other animals; or intended to affect the structure or any function of the body of man or other animals, and which does not achieve its primary intended purposes through chemical action within or on the body of man or other animals and which is not dependent upon being metabolized for the achievement of any of its primary intended purposes.” This definition provides a clear distinction between a medical device and other FDA regulated products such as drugs. If the primary intended use of a medical product is achieved through chemical action or by being metabolized by the body, the product is usually a drug or biologic. If not, it is generally a medical device.

We are currently developing a robotic-assisted surgical system, which is regulated by the FDA as a medical device under the FDCA, as implemented and enforced by the FDA. The FDA regulates, among other things, the development, testing, manufacturing, labeling, packaging, storage, installation, servicing, advertising, promotion, marketing, distribution, import, export, and post-market surveillance of medical devices. The Vicarious Surgical System is not yet authorized for commercialization in the United States.

Device Premarket Regulatory Requirements

Before being introduced into the U.S. market, each medical device must obtain marketing clearance, authorization, or approval from the FDA through the premarket notification (510(k)) process, the de novo classification process, or the premarket approval (“PMA”) process, unless they are determined to be Class I devices or to otherwise qualify for an exemption from one of these available forms of premarket review and clearance, authorization, or approval by the FDA. Under the FDCA, medical devices are classified into one of three classes — Class I, Class II or Class III — depending on the degree of risk associated with each medical device and the extent of control needed to provide reasonable assurance of safety and effectiveness. Classification of a device is important because the class to which a device is assigned determines, among other things, the necessity and type of FDA review required prior to marketing the device. Class I devices are those for which reasonable assurance of safety and effectiveness can be maintained through adherence to general controls that include compliance with the applicable portions of the FDA’s Quality System Regulation (“QSR”), as well as regulations requiring establishment registration and device listing, reporting of adverse medical events, and appropriate, truthful and non-misleading labeling and promotional materials. The Class I designation also applies to devices for which there is insufficient information to determine that general controls are sufficient to provide reasonable assurance of the safety and effectiveness of the device or to establish special controls to provide such assurance, but that are not life-supporting or life-sustaining or for a use which is of substantial importance in preventing impairment of human health, and that do not present a potential, unreasonable risk of illness or injury.

Class II devices are those for which general controls alone are insufficient to provide reasonable assurance of safety and effectiveness and there is sufficient information to establish “special controls.” These special controls can include performance standards, post-market surveillance requirements, patient registries and FDA guidance documents describing device-specific special controls. While most Class I devices are exempt from the 510(k) premarket notification requirement, most Class II devices require a clearance of a 510(k) premarket notification prior to commercialization in the United States; however, the FDA has the authority to exempt Class II devices from the premarket notification requirement under certain circumstances. As a result, manufacturers of most Class II devices must submit 510(k) premarket notifications to the FDA in order to obtain the necessary clearance to market or commercially distribute such devices. To obtain 510(k) clearance, manufacturers must submit to the FDA adequate information demonstrating that the proposed device is “substantially equivalent” to a “predicate device” that is already on the market. A predicate device is a legally marketed device that is not subject to PMA, meaning, (i) a device that was legally marketed prior to May 28, 1976 (“preamendments device”) and for which a PMA is not required, (ii) a device that has been reclassified from Class III to Class II or I, or (iii) a device that was found substantially equivalent through the 510(k) process. If the FDA agrees that the device is substantially equivalent to the predicate device identified by the applicant in a premarket notification submission, the FDA will grant 510(k) clearance for the new device, permitting the applicant to commercialize the device. Premarket notifications are subject to user fees, unless a specific exemption applies.

After a medical device receives 510(k) clearance, any modification that could significantly affect the device’s safety or effectiveness, or that would constitute a major change in its intended use, requires a new 510(k) submission or could require a PMA application. The FDA requires each manufacturer to make the determination of whether a device modification requires a new 510(k) or PMA in the first instance, but the FDA may review any such decision. If the FDA disagrees with a manufacturer’s decision not to seek a new 510(k) clearance or PMA for a particular change, the FDA may retroactively require the manufacturer to submit a 510(k) or PMA application. The FDA may also require the manufacturer to cease its marketing activities for the modified device in the United States and/or recall the device until the appropriate marketing authorization for the modification is obtained.

If there is no adequate predicate to which a manufacturer can compare its proposed device, the proposed device is automatically classified as a Class III device. In such cases, a device manufacturer must then fulfill the more rigorous PMA requirements or can request a risk-based classification determination for its device in accordance with the De Novo classification process.

Devices that are intended to be life sustaining or life supporting, devices that are implantable, devices that present a potential unreasonable risk of harm or are of substantial importance in preventing impairment of health, and devices that are not substantially equivalent to a predicate device and for which safety and effectiveness cannot be assured solely by the general controls and special controls are placed in Class III. Such devices generally require FDA approval through the PMA process, unless the device is a preamendments device not yet subject to a regulation requiring premarket approval. The PMA process is more demanding than the 510(k) process. For a PMA, the manufacturer must demonstrate through extensive data, including data from preclinical studies and one or more clinical trials, that the device is safe and effective for its proposed indication. The PMA application must also contain a full description of the device and its components, a full description of the methods, facilities and controls used for manufacturing, and proposed labeling. Following receipt of a PMA submission, the FDA determines whether the application is sufficiently complete to permit a substantive review. If the FDA accepts the application for review, it has 180 days under the FDCA to complete its review and determine whether the proposed device can be approved for commercialization, although in practice, PMA submission reviews often take significantly longer, and it can take up to several years for the FDA to issue a final decision. Before granting a PMA, the FDA generally also performs an on-site inspection of manufacturing facilities for the product to ensure compliance with the QSR.

The FDA may refer any PMA application, including applications for novel device candidates or device candidates that present difficult questions of safety or efficacy, to an advisory committee for review. Typically, an advisory committee is a panel of independent experts, including clinicians and other scientific experts, that reviews, evaluates and provides a recommendation as to whether the application should be approved and, if so, under what conditions. The FDA is not bound by the recommendation of an advisory committee, but it considers such recommendations when making final decisions on approval.

If the FDA’s evaluation of the PMA application and inspection of the manufacturing facility is favorable, the FDA may issue an approval order authorizing commercial marketing of the device, or an “approvable letter,” which usually contains a number of conditions that must be met in order to secure final approval of the PMA. When and if those conditions have been met to the satisfaction of the FDA, the agency will issue a PMA approval order, subject to the conditions of approval and the limitations established in the approval order. If the FDA’s evaluation of a PMA application or manufacturing facility is not favorable, the FDA will deny approval of the PMA or issue a “not approvable letter.” The FDA may also determine that additional studies are necessary, in which case the PMA may be delayed for several months or years while such additional studies are conducted and data is submitted in an amendment to the PMA. The PMA process can be expensive, uncertain and lengthy, and each PMA submission is subject to a substantial user fee unless a specific exemption applies. The FDA may also grant a PMA subject to post-approval requirements, such as the need for additional patient follow-up or requirements to conduct additional clinical trials.

New PMA applications or PMA supplements may be required for any modifications to the manufacturing process, labeling, device specifications, materials or design of a device that is approved through the PMA process. PMA supplements often require submission of the same type of information as an initial PMA application, except that the supplements are limited to information needed to support any changes from the device covered by the approved PMA application and may or may not require as extensive clinical data or the convening of an advisory committee.

The De Novo classification process allows a manufacturer whose novel device is automatically classified into Class III to request down-classification of its device to Class I or Class II, on the basis that the device presents low or moderate risk, as an alternative to following the typical Class III device pathway requiring the submission and approval of a PMA application. Under the Food and Drug Administration Safety and Innovation Act of 2012, the FDA is required to classify a device within 120 days following receipt of the De Novo classification request from an applicant; however, the most recent FDA premarket review goals state that the agency will attempt to issue a decision within 150 days of receipt on 70% of all De Novo classification requests received during each fiscal year. If the manufacturer seeks reclassification into Class II, the classification request must include a draft proposal for special controls that are necessary to provide a reasonable assurance of the safety and effectiveness of the medical device. The FDA may reject the classification request if it identifies a legally marketed predicate device that would be appropriate for a 510(k) notification or determines that the device is not low to moderate risk or that general controls would be inadequate to control the risks and special controls cannot be developed. If a De Novo classification request results in the classification of the novel device into Class II, the device may be used as a predicate for future 510(k) premarket notifications for other similar devices with the same intended uses. De Novo classification requests are subject to user fees, unless a specific exemption applies.

As with the 510(k) premarket notification process described above, any modification to a device authorized through the De Novo process that could significantly affect the safety or effectiveness of such device, or that would constitute a major change in its intended use, requires a new 510(k) clearance or could require the submission of a PMA application.

Predetermined Change Control Plans for Medical Devices

As part of the Consolidated Appropriations Act for 2023, Congress amended the FDCA to give FDA the authority to authorize certain potential, future changes to a medical device in a predetermined change control plan (“PCCP”) as part of a PMA application or 510(k) premarket notification for a medical device, including a device that incorporates artificial intelligence or machine learning technology. A PCCP must describe the specific proposed modifications and provide sufficient information to demonstrate that the device will remain safe and effective for its intended use, and in the case of a 510(k) cleared device that the device will remain substantially equivalent to the predicate device, if the applicant implements the proposed modifications to the device as described in the PCCP. If FDA authorizes a PCCP for a device, any modification to the device within the authorized scope of the PCCP will not require the submission and authorization of a new PMA application, PMA supplement, or new 510(k) premarket notification. However, modifications to a previously authorized PCCP will generally require submission of a PMA supplement or new 510(k) premarket notification, depending on the original authorization pathway for the device, with the modified PCCP.

Medical Device Clinical Studies

Clinical trials are almost always required to support PMAs and are sometimes required to support 510(k) and de novo classification submissions. All clinical investigations of devices to determine safety and effectiveness must be conducted in accordance with the FDA’s investigational device exemption (or IDE) regulations that govern investigational device labeling, prohibit promotion of investigational devices, and specify recordkeeping, reporting and monitoring responsibilities of study sponsors and study investigators. If the device presents a “significant risk,” as defined by the FDA, the FDA requires the device sponsor to submit an IDE application to the FDA, which must become effective prior to commencing human clinical trials. The IDE will automatically become effective 30 days after receipt by the FDA, unless the FDA denies the application or notifies us that the investigation is on hold and may not begin until the sponsor provides supplemental information about the investigation that satisfies the FDA’s concerns. If the FDA determines that there are deficiencies or other concerns with an IDE that require modification of the study, the FDA may permit a clinical trial to proceed under a conditional approval. In addition, the study must be approved by, and conducted under the oversight of, an institutional review board (or IRB) for each clinical site. If the device presents a non-significant risk to the patient according to criteria established by the FDA as part of the IDE regulations, a sponsor may begin the clinical trial after obtaining approval for the trial by one or more IRBs without separate authorization from the FDA, but must still comply with abbreviated IDE requirements, such as monitoring the investigation, ensuring that the investigators obtain informed consent, and labeling and record-keeping requirements.

As part of its clinical trial oversight responsibilities, an IRB must review and approve, among other things, the trial protocol and informed consent information to be provided to clinical trial subjects. An IRB must operate in compliance with FDA regulations. Information about certain clinical studies, including details of the protocol and eventually trial results, also must be submitted within specific timeframes to the National Institutes of Health (“NIH”) for public dissemination on the clinicaltrials.gov data registry. Information related to the product, patient population, phase of investigation, trial sites and other aspects of the clinical trial are made public as part of the trial registration. Sponsors are also obligated to disclose the results of their clinical studies after completion. Disclosure of the results of these studies can be delayed in some cases for up to two years after the date of completion of the trial. Failure to timely register a covered clinical study or to submit study results as provided for in the law can give rise to civil monetary penalties and also prevent the non-compliant party from receiving future grant funds from the federal government. The NIH Final Rule on clinicaltrials.gov registration and reporting requirements became effective in 2017, and the government has brought enforcement actions against non-compliant clinical trial sponsors.

Progress reports detailing the results of the clinical studies must be submitted at least annually to the FDA and more frequently if unanticipated serious adverse events (“SAEs”) occur. The FDA or the sponsor may suspend or terminate a clinical trial at any time on various grounds, including a finding that the research subjects or patients are being exposed to an unacceptable health risk. Similarly, an IRB can suspend or terminate approval of a clinical trial at its institution if the clinical trial is not being conducted in accordance with the clinical protocol, GCP, or other IRB requirements or if the investigational product has been associated with unexpected serious harm to patients.

In the Consolidated Appropriations Act for 2023, Congress amended the FDCA to require the sponsor of any pivotal clinical trial that will be used to demonstrate the safety and effectiveness of a medical device marketing authorization submission to develop a diversity action plan for such trial, and if submission of an IDE application is required, to submit such diversity action plan to the FDA. The action plan must include the sponsor’s diversity goals for enrollment, as well as a rationale for the goals and a description of how the sponsor will meet them. The FDA may grant a waiver for some or all of the requirements for a diversity action plan. It is unknown at this time how the diversity action plan may affect device pivotal clinical trial planning and timing, but if FDA objects to a sponsor’s diversity action plan and requires the sponsor to amend the plan or take other actions, it may delay trial initiation.

Post-Marketing Restrictions and Enforcement

After a device is placed on the market, numerous regulatory requirements apply. These include, but are not limited to:

In addition, under the FDA medical device reporting (“MDR”) regulations, medical device manufacturers are required to report to the FDA information that a device has or may have caused or contributed to a death or serious injury or has malfunctioned in a way that would likely cause or contribute to death or serious injury if the malfunction of the device or a similar device of such manufacturer were to recur. The decision to file an MDR involves a judgment by the manufacturer. If the FDA disagrees with the manufacturer’s determination, the FDA can take enforcement action.

The medical device reporting requirements also extend to health-care facilities that use medical devices in providing care to patients, or “device user facilities,” which include hospitals, ambulatory surgical facilities, nursing homes, outpatient diagnostic facilities, or outpatient treatment facilities, but not physician offices. A device user facility must report any device-related death to both the FDA and the device manufacturer, or any device-related serious injury to the manufacturer (or, if the manufacturer is unknown, to the FDA) within 10 days of the event. Device user facilities are not required to report device malfunctions that would likely cause or contribute to death or serious injury if the malfunction were to recur but may voluntarily report such malfunctions through MedWatch, the FDA’s Safety Information and Adverse Event Reporting Program.

The FDA also has the authority to require the recall of commercialized medical device products in the event of material deficiencies or defects in design or manufacture. The authority to require a recall must be based on an FDA finding that there is a reasonable probability that the device would cause serious adverse health consequences or death. Manufacturers may, under their own initiative, recall a product if any distributed devices fail to meet established specifications, are otherwise misbranded or adulterated under the FDCA, or if any other material deficiency is found. The FDA requires that certain classifications of recalls be reported to the FDA within ten working days after the recall is initiated.

The failure to comply with applicable regulatory requirements can result in enforcement action by the FDA, which may include any of the following sanctions:

To ensure compliance with regulatory requirements, medical device manufacturers are subject to market surveillance and periodic, pre-scheduled and unannounced inspections by the FDA, and these inspections may include the manufacturing facilities of subcontractors.

Breakthrough Device Designation and the Safer Technologies Program

The 21^st Century Cures Act, which was signed into law on December 13, 2016, established and directed FDA to implement the Breakthrough Devices Program. Under the program, device manufacturers may voluntarily request breakthrough designation for devices that provide for more effective treatment or diagnosis of life-threatening or irreversibly debilitating human disease or conditions over currently available technology and that meet at least one of the following criteria:

The goal of the Breakthrough Devices Program is to accelerate the timeline to market for novel devices that will likely provide a benefit to patients. A Breakthrough Device designation offers multiple benefits to the device manufacturer, including priority review of the pre-market submission for the device, opportunities to interact directly with FDA’s experts throughout the process, and engagement of FDA senior management, to the extent permitted by the FDA’s resources.

In November 2019, we received FDA Breakthrough Device designation for a prior version of the Vicarious Surgical System with a proposed indication for use in ventral hernia repair procedures. The Vicarious Surgical System is considered a Class II medical device. We have had pre-submission meetings with the FDA to align on our regulatory strategy and plan to file a de novo application with the FDA for use in ventral hernia procedures as our first indication.

A preliminary meeting with the FDA was conducted in December 2021 to discuss with the FDA our decision to make two technology changes to the Vicarious Surgical System design that was granted Breakthrough Device designation in November 2019. Based on these changes, the FDA has determined that the current Vicarious Surgical System design that is planned for the initial limited launch and was submitted to the FDA in the November 2021 FDA pre-submission meeting request is different from the device that was granted Breakthrough Device designation for the device design filed in November 2019. The FDA stated that the Breakthrough Device designation remains active for the prior device design granted Breakthrough Device designation in November 2019. In the future, we may attempt to reincorporate the technologies from such prior device design to leverage the previously granted Breakthrough Device designation. The process of medical device development is inherently uncertain and there is no guarantee that a Breakthrough Device designation will be granted to a different device design, and if it were granted, there is no guarantee that such designation will accelerate the timeline for authorization or make it more likely that the Vicarious Surgical System will be authorized.

Devices that may significantly improve the safety of currently available medical products that target a disease or condition, but the morbidities or mortalities associated with the disease or condition are less serious than those eligible for Breakthrough Device designation, may be eligible for the STeP Program. Acceptance into the STeP Program provides opportunities to interact with FDA experts through various program options to address design and development issues efficiently. In February 2024, we submitted a STeP Program application to the FDA, and the agency subsequently accepted Vicarious Surgical’s robotic system into the program.

Federal Trade Commission Regulatory Oversight

Our advertising for our products and services is subject to federal truth-in-advertising laws enforced by the Federal Trade Commission (“FTC”), as well as comparable state consumer protection laws. Under the Federal Trade Commission Act (the “FTC Act”), the FTC is empowered, among other things, to (a) prevent unfair methods of competition and unfair or deceptive acts or practices in or affecting commerce; (b) seek monetary redress and other relief for conduct injurious to consumers; and (c) gather and compile information and conduct investigations relating to the organization, business, practices, and management of entities engaged in commerce. The FTC has very broad enforcement authority, and failure to abide by the substantive requirements of the FTC Act and other consumer protection laws can result in administrative or judicial penalties, including civil penalties, injunctions affecting the manner in which we would be able to market services or products in the future, or criminal prosecution.

Healthcare Law and Regulation

If the Vicarious Surgical System or our other product candidates are authorized in the United States, we will have to comply with various U.S. federal and state laws, rules and regulations pertaining to healthcare fraud and abuse, including anti-kickback laws and physician self-referral laws, rules and regulations. Violations of the fraud and abuse laws are punishable by criminal and civil sanctions, including, in some instances, exclusion from participation in federal and state healthcare programs, including Medicare and Medicaid. These laws include the following:

Some state laws require pharmaceutical or medical device companies to comply with the relevant industry’s voluntary compliance guidelines and the relevant compliance guidance promulgated by the federal government in addition to requiring drug and device manufacturers to report information related to payments to physicians and other health-care providers or marketing expenditures.

State and foreign laws also govern the privacy and security of health information in some circumstances, many of which differ from each other in significant ways and often are not preempted by HIPAA, thus complicating compliance efforts. We also may be subject to, or may in the future become subject to, U.S. federal and state, and foreign laws and regulations imposing obligations on how we collect, use, disclose, store and process personal information. Our actual or perceived failure to comply with such obligations could result in liability or reputational harm and could harm our business. Ensuring compliance with such laws could also impair our efforts to maintain and expand our customer base and thereby decrease our future revenues.

Third-Party Coverage and Reimbursement

In the United States, third-party payors, including government health programs such as Medicare and Medicaid, commercial health insurers and managed care organizations, are responsible for hospital and surgeon reimbursement for covered surgical procedures. Third-party payors generally reimburse hospitals and physicians for surgery when the procedure is considered medically necessary. The Centers for Medicare and Medicaid Services, or CMS, manages the Medicare program and administers the Medicaid program in conjunction with applicable state governments. Many commercial health insurers model their reimbursement methodologies after the Medicare program. As the single largest payor, the Medicare program has a significant impact on other third-party payors’ payment systems.

Generally, reimbursement for professional services performed at a facility by physicians is reported under billing codes issued by the American Medical Association, or AMA, known as Current Procedural Terminology, or CPT, codes. Physician reimbursement under Medicare generally is based on a fee schedule and determined by the relative value of the professional service rendered. In addition, CMS and the National Center for Health Statistics are jointly responsible for overseeing changes and modifications to billing codes used by hospitals to report inpatient procedures, known as ICD-10-PCS codes. Under the Medicare program, CMS generally reimburses hospitals for services provided during an inpatient stay based on a prospective payment system that is determined by a classification system known as Medicare-Severity Diagnostic Related Groupings, or MS-DRGs. MS-DRGs are assigned using a number of factors, including the principal diagnosis, major procedures, discharged status, patient age, and complicating secondary diagnoses, among other things. Hospital outpatient services, reported by CPT codes, are assigned to clinically relevant Ambulatory Payment Classifications used to determine the payment amount for services provided.

Since October 1, 2015, a new family of ICD-10-PCS codes can be used, in conjunction with other applicable procedure codes, to describe various robotic-assisted procedures. An inpatient surgical procedure, completed with or without robotic assistance, continues to be assigned to the clinically relevant MS-DRG.

Third-party payors carefully review and increasingly challenge the prices charged for medical products and surgical services. Reimbursement rates from commercial health insurers vary depending on the procedure performed, the specific payor’s reimbursement policies, contract terms, and other factors. Because both hospitals and physicians may receive the same reimbursement for a surgical procedure, whether it is performed with robotic assistance or not and regardless of actual costs incurred in furnishing the patient care, including for the specific medical products or supplies used during that procedure, hospitals and physicians may decide not to use our products if reimbursement amounts are insufficient to cover any additional costs incurred when purchasing and using our products.

For procedures that would involve assistance from our robotic-assisted surgical system, U.S. health-care institutions typically bill various third-party payors, such as government health programs (e.g., Medicare and Medicaid) and commercial health insurance plans, for the primary surgical procedure only. If our robotic-assisted surgical system receives marketing authorization from the FDA, coverage and reimbursement by third-party payors will generally be determined by the medical necessity of the primary surgical procedure. Government health programs and other third-party payors may also consider additional factors when determining coverage and reimbursement, including the designation of the surgical procedure as a covered benefit, the appropriateness of the procedure for the specific patient, guidelines for the procedure established by the relevant professional college or medical society, and a payor determination that the procedure is neither experimental nor investigational. We believe that the procedures we intend to pursue as indications for use for our robotic-assisted surgical system are established surgical procedures that are generally already reimbursable by government health programs, commercial health insurers, and managed care organizations for appropriately selected patients. If hospitals do not obtain sufficient reimbursement from third-party payors for procedures performed with our products, or if government and commercial payors’ policies do not cover surgical procedures performed using our products, we may not be able to generate the revenues necessary to support our business.

The process for determining whether a third-party payor will provide coverage for a product or procedure may be separate from the process for establishing the reimbursement rate that such a payor will pay for the product or procedure. A payor’s decision to provide coverage for a product or procedure does not imply that an adequate reimbursement rate will be approved. Further, one payor’s determination to provide coverage for a product or procedure does not assure that other payors will also provide coverage. Adequate third-party reimbursement may not be available to enable us to maintain price levels sufficient to ensure profitability.

Healthcare Reform

The FDA’s and other regulatory authorities’ policies may change and future legislative and regulatory proposals may prevent, limit or delay regulatory authorization of our product candidates or, more broadly, may materially impact the ability of the FDA and other regulatory agencies to operate as they have historically operated. We cannot be sure whether additional legislative changes will be enacted, or whether any of the FDA’s regulations, guidances or interpretations will be changed, or what the impact of such changes on the agency and its scientific review staff, if any, may be. For example, the next FDA user fee reauthorization package is expected to enter stakeholder negotiations beginning in mid-2025, with any agreement sent to Congress in early 2027 for purposes of initiating the legislative process. Reauthorization of the prescription drug user fee program would need to be finalized by Congress by the end of September 2027 in order to avoid a disruption in FDA’s review goals for BLAs and other activities supported by user fees assessed against industry. If we are slow or unable to adapt to changes in existing requirements or the adoption of new requirements or policies, or if we are not able to maintain regulatory compliance, we may lose any marketing authorization that we otherwise may have obtained, and we may not achieve or sustain profitability, which would adversely affect our business, prospects, financial condition and results of operations.

In December 2022, the U.S. Congress enacted the Consolidated Appropriations Act for 2023, an omnibus appropriations bill, which included amendments to the FDCA under the Food and Drug Omnibus Reform Act of 2022 (“FDORA”). In addition to the requirement that sponsors of pivotal trials submit diversity action plans for pivotal trials (see “—Government Regulation-Regulatory Landscape in the United States-Device Clinical Studies”), FDORA included new requirements for cyber devices, defined as any medical device that is or includes software that is validated, installed, or authorized by the manufacturer; can connect to the internet; and may be vulnerable to cybersecurity threats. Under the FDORA amendments to the FDCA, any application for marketing authorization of a cyber device must include a software bill of materials and a cybersecurity plan describing the methods by which the manufacturer will monitor, identify and address cybersecurity vulnerabilities. Any failure by a cyber device manufacturer to comply with applicable cybersecurity requirements is considered a violation of the FDCA and will subject the manufacturer to enforcement actions and possibly legal sanctions.

In the United States, there have been, and we expect there will continue to be, a number of legislative and regulatory changes to the healthcare system. In March 2010, the Patient Protection and Affordable Care Act, as amended by the Health Care and Education Reconciliation Act of 2010, (collectively, the “ACA”) was signed into law and substantially changed the way healthcare is financed by both governmental and private insurers in the United States. The ACA contains a number of provisions, including those governing enrollment in federal healthcare programs, reimbursement adjustments and fraud and abuse changes. Additionally, the ACA provided incentives to programs that increase the federal government’s comparative effectiveness research and implemented payment system reforms including a national pilot program on payment bundling to encourage hospitals, physicians and other providers to improve the coordination, quality and efficiency of certain healthcare services through bundled payment models.

Legislative and regulatory changes under the ACA remain possible, although it is unknown what form any such changes or any law would take, and how or whether it may affect the medical device industry as a whole or our business in the future. We expect that changes or additions to the ACA, the Medicare and Medicaid programs and changes stemming from other healthcare reform measures, especially with regard to healthcare access, financing or other legislation in individual states, could have a material adverse effect on the healthcare industry in the United States.

Moreover, there has recently been heightened governmental scrutiny, including increasing legislative and enforcement interest, over the manner in which manufacturers set prices for their marketed healthcare products, which has resulted in several Congressional inquiries and proposed and enacted legislation designed, among other things, to bring more transparency to healthcare product pricing, review the relationship between pricing and manufacturer patient programs and reform government program reimbursement methodologies for healthcare products. Individual states in the United States have also become increasingly active in implementing regulations designed to control healthcare product pricing, including price or patient reimbursement constraints, discounts, restrictions on certain product access and marketing cost disclosure and transparency measures.

We cannot predict the likelihood, nature or extent of government regulation that may arise from future legislation or administrative or executive action, either in the United States or abroad. We expect that additional state and federal healthcare reform measures will be adopted in the future, any of which could limit the amounts that federal and state governments will pay for healthcare products and services. Moreover, if we are slow or unable to adapt to changes in existing requirements or the adoption of new requirements or policies, or if we are not able to maintain regulatory compliance, our medical devices may lose any marketing authorization that may have been obtained and we may not achieve or sustain profitability, which would adversely affect our business.

U.S. and Foreign Data Security and Data Privacy Laws

HIPAA, as well as a number of other federal and state privacy-related laws, extensively regulate the use and disclosure of individually identifiable health information, known as “protected health information” or “PHI”.

HIPAA applies to health plans, healthcare providers who engage in certain standard healthcare transactions electronically, such as electronic billing, and healthcare clearinghouses, all of which are referred to as “covered entities” under HIPAA. State imposed health information privacy and security laws typically apply based on licensure, for example, licensed providers or licensed entities are limited in their ability to use and share health information.

Additionally, all U.S. states have enacted legislation protecting the privacy and security of “personal information”, such as identifiable financial or health information, social security numbers, credit card information and other personally identifiable information. These laws overlap and apply simultaneously with federal privacy and security requirements and regulated entities must comply with all of them. The California Consumer Privacy Act (“CCPA”) went into effect January 1, 2020, and is one of the most restrictive state privacy laws, protecting a wide variety of personal information and granting significant rights to California residents with respect to their personal information. Regulations under CCPA have been modified several times, and continue to be modified. Additionally, a new privacy law, the California Privacy Rights Act, (“CPRA”) was approved by California voters in the election of November 3, 2020 and went into effect in January of 2023. The CPRA modified the CCPA significantly, and may result in further uncertainty, additional costs and expenses stemming from efforts to comply with this law, and increases the potential for harm and liability for failure to comply. Among other things, the CPRA established a new regulatory authority, the California Privacy Protection Agency, which is enacting new regulations and has expanded enforcement authority. Other states in the U.S. are considering privacy laws similar to CCPA. Colorado, Connecticut, Delaware, Florida, Indiana, Iowa, Montana, New Jersey, Oregon, Tennessee, Texas Virginia, and Utah have enacted similar data protection laws to California and other U.S. states have proposals under consideration, increasing our regulatory compliance risk. In dealing with health information for the development of our technology or for commercial purposes, we will be indirectly affected by HIPAA and state-imposed health information privacy and cybersecurity laws because these laws regulate the ability of our potential customers and research collaborators to share health information with us. Additionally, we must identify and comply with all applicable state laws for the protection of personal information with respect to personal information that we collect.

In the event we market outside of the United States, we will be subject to foreign privacy and data security laws that vary by jurisdiction, differ from those in the United States, and may require us to implement additional compliance measures or change our business practices related to the collection and use of personal and patient data. For example, in the European Union (“EU”), we will be subject to the EU General Data Protection Regulation (“GDPR”) that significantly regulates the possession, use, and disclosure of personal information. In particular, medical or health data, genetic data and biometric data where the latter is used to uniquely identify an individual are all classified as “special category” data under the GDPR and are afforded greater protection and require additional compliance obligations. Noncompliance could result in the imposition of fines, penalties, or orders to stop noncompliant activities. We may be subject to GDPR if we undertake operations or transact business in the EU, offer products or services to individuals in the EU or monitor the behavior of individuals within the EU.

Disruptions to Information Technology Systems and Cybersecurity Incidents

We rely, and will continue to rely on, information technology systems to keep financial and employment records, facilitate our research and development initiatives, manage our operations, maintain quality control, maintain corporate records, communicate with staff, provide our services and operate other critical functions. Our information technology systems, and those of our vendors and partners, are potentially vulnerable to disruption due to breakdown, malicious intrusion and computer viruses or other disruptive events, including, but not limited to, natural disasters and catastrophes. Cyberattacks and other malicious internet-based activity continue to increase, and cloud-based platform providers of services have been and are expected to continue to be targeted, especially in the health-care industry. Methods of attacks on information technology systems and data security breaches change frequently, are increasingly complex and sophisticated, including deployment of harmful malware and key loggers, ransomware, a malicious website, social engineering and phishing scams, and other means to affect the confidentiality, integrity and availability of our technology systems and data, and can originate from a wide variety of sources. In addition to traditional computer “hackers,” malicious code, such as viruses and worms, denial-of-service attacks and sophisticated nation-state and nation-state supported actors present a constant threat, including advanced persistent threat intrusions. Cyberattacks may also be due to employee error or malfeasance, power outages, hardware failures, telecommunication or utility failures, catastrophes or other unforeseen events, and our system redundancy and other disaster recovery planning may be ineffective or inadequate in preventing or responding to any of these circumstances. Techniques used in cybersecurity attacks to obtain unauthorized access, disable or sabotage information technology systems are evolving rapidly with data breaches and other cybersecurity incidents becoming commonplace. We recognize the risk of cybersecurity incidents and work to constantly evolve our incident response plans as the known threat vectors emerge. We vet and verify the cybersecurity practices and compliance of our vendors to ensure they follow established guidelines, compliance requirements, and best practices related to their industry. Internally, we utilize a cybersecurity maturity model based on the National Institute of Standards and Technology, or NIST, standards to track and report on the current and future compliance and progress within the multiple areas of compliance and concern. We intend to make steady measured improvements to our cybersecurity maturity along with investments in tools, and services that are aligned with our growth and maturity. We intend to adhere to a baseline of best practices that include proper use of encryption of data and communications, policies and procedures, and mitigation/validation practices that seek to ensure the approach is meeting or exceeding our commitment to our plan. Despite our current or future efforts to protect against cybersecurity attacks and data security incidents, there is no guarantee that our efforts are adequate to safeguard against all such attacks and incidents. Moreover, it is possible that we may not be able to anticipate, detect, appropriately react and respond to, or implement effective preventative measures against, all cybersecurity incidents.

Human Capital

As of January 24, 2025, we had 123 employees, 61 of whom were engaged directly in research, development, regulatory and clinical activities, 38 in manufacturing and quality assurance and 24 in marketing, sales, and administrative activities.

Employees at all levels of our organization are eligible for a company bonus and equity program. In addition, we offer a competitive base salary and a full suite of benefits that we regularly review to ensure that those benefits continue to meet the needs of our employees. Compensation and benefits are paired with talent management programs to retain and develop our team, and to attract new talent.

Physical, mental, and financial wellness are front and center in our benefits offerings. We provide access to external experts and resources to assist employees and their families. Additionally, we offer incentives and rewards to encourage healthy behaviors. Financially, we provide access to a financial advisory service, an online financial wellness assessment and education service, and free webinars, and offer a company 401(k) match.

Facilities

Our principal executive offices are currently located at 78 Fourth Avenue, Waltham, Massachusetts 02451, consisting of approximately 42,000 square feet. On October 14, 2021, we entered into a lease amendment pursuant to which we agreed to lease additional space consisting of approximately 30,000 square feet located at 62 Fourth Avenue Waltham, MA 02451. Both leased spaces will expire conterminously on March 31, 2032, with an option to renew for an additional five years until March 31, 2037.

Information Available on the Internet

Our internet address is https://www.vicarioussurgical.com, to which we regularly post copies of our press releases as well as additional information about us. We also maintain an Investor Relations website as a routine channel for distribution of important information, including news releases, presentations, and financial statements (https://investor.vicarioussurgical.com). We intend to use our Investor Relations website as a means of complying with our disclosure obligations under Regulation FD. Accordingly, investors should monitor our Investor Relations website in addition to press releases, Securities and Exchange Commission (the “SEC”) filings, and public conference calls and webcasts. Our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and all amendments to those reports, will be available to you free of charge through the Investor Relations section of our website as soon as reasonably practicable after such materials have been electronically filed with, or furnished to, the SEC. The SEC maintains an internet site (http://www.sec.gov) that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC. We include our web site address in this Annual Report on Form 10-K only as an inactive textual reference. Information contained in our website does not constitute a part of this report or our other filings with the SEC.

ITEM 1A. RISK FACTORS.

Careful consideration should be given to the following risk factors, in addition to the other information set forth in this Annual Report on Form 10-K, including the section of titled “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our consolidated financial statements and related notes, and in other documents that we file with the SEC, in evaluating our company and our business. Investing in our securities involves a high degree of risk. If any of the events described in the following risk factors actually occur, our business, financial condition, results of operations and future growth prospects could be materially and adversely affected and the trading price of our securities could decline. Our actual results could differ materially from those anticipated in the forward-looking statements as a result of factors that are described below and elsewhere in this Annual Report on Form 10-K.

Risks Related to Our Financial Condition and Capital Requirements

There is substantial doubt about whether the Company can continue as a going concern.

To date, the Company has earned no revenues and has incurred an accumulated deficit of $195.9 million. In addition, the Company has limited financial resources. As of December 31, 2024, we held cash and cash equivalents of $9.7 million and short-term investments of $39.4 million, which we believe will only provide funding for our operations into the first quarter of 2026. Accordingly, there is substantial doubt as to whether existing cash resources are sufficient to enable the Company to continue its operations for the next 12 months as a going concern. Our management is evaluating and pursuing different strategies to obtain the required funding for our operations. These strategies may include but are not limited to public and private placements of equity and/or debt, licensing and/or collaboration arrangements and strategic alternatives with third parties, or other funding from the government or third parties. There can be no assurance that these funding efforts will be successful. If we are unable to obtain funds when needed or on acceptable terms, we may be required to curtail our current development programs, cut operating costs, forego future development and other opportunities or even liquidate our business interests and investors may lose their investment.

We have a limited operating history on which to assess the prospects for our business, we have not generated any revenue from sales of the Vicarious Surgical System, and have incurred losses since inception. We anticipate that we will continue to incur significant losses for at least the next several years as we develop and commercialize the Vicarious Surgical System for use in ventral hernia repair procedures and future indications.

Since inception, we have devoted substantially all of our financial resources to developing our surgical robot. We have financed our operations primarily through the issuance of equity securities. We have not generated revenue from the sale of the Vicarious Surgical System to date and have incurred significant losses. We incurred net losses of $63.2 million and $71.1 million for the years ended December 31, 2024 and 2023, respectively. The amount of our future net losses will depend, in part, on future sales and on-going development of the Vicarious Surgical System, the rate of our future expenditures and our ability to obtain funding through the issuance of our securities, strategic collaborations or grants. We expect to continue to incur significant losses for at least the next several years as we commercialize the Vicarious Surgical System for use in ventral hernia repair procedures and seeks to develop and commercialize new surgical applications for the Vicarious Surgical System, such as gynecological, urological or other general surgical applications. We anticipate that our expenses will increase substantially if and as we:

Our ability to generate future revenue from the Vicarious Surgical System sales depends heavily on our success in many areas, including but not limited to:

We have incurred significant losses since inception. As such, you cannot rely upon our historical operating performance to make an investment or voting decision regarding us.

Since inception, we have engaged in research and development activities. We have financed our operations primarily through the issuance of equity securities. Our accumulated deficit as of December 31, 2024 was $195.9 million. We do not know whether or when we will become profitable. Our ability to generate revenue and achieve profitability depends upon our ability to accelerate the commercialization of the Vicarious Surgical System in line with the demand from new partnerships and our aggressive business strategy. We may be unable to achieve any or all of these goals.

We may need to raise additional funding to develop and commercialize the Vicarious Surgical System and to expand our research and development efforts. This additional financing may not be available on acceptable terms, or at all. Failure to obtain this necessary capital when needed may force us to delay, limit or terminate our product commercialization or development efforts or other operations.

Our operations have consumed substantial amounts of cash since inception. We expect to expend substantial additional amounts to commercialize the Vicarious Surgical System for use in ventral hernia repair procedures and to develop new surgical applications for the Vicarious Surgical System. We will require additional capital to develop and commercialize the Vicarious Surgical System for abdominal surgeries and to develop the Vicarious Surgical System for new surgical applications. As of December 31, 2024, we held cash and cash equivalents of $9.7 million and short-term investments of $39.4 million. We estimate that our cash resources will be sufficient to fund operations and meet our obligations into the first quarter of 2026. We follow the guidance of ASC Topic 205-40, Presentation of Financial Statements-Going Concern, in order to determine whether there is substantial doubt about our ability to continue as a going concern for one year after the date our financial statements are issued. Based on our current cash forecast, we expect that our present capital resources will not be sufficient to fund our planned operations for that period of time, which raises substantial doubt as to the Company’s ability to continue as a going concern. In addition, our operating plans may change as a result of many factors that may currently be unknown to us, and we may need to seek additional funds sooner than planned.

We cannot guarantee that future financing will be available in sufficient amounts or on terms acceptable to us, if at all. Moreover, the terms of any future financing may adversely affect the holdings or the rights of our stockholders and the issuance of additional securities, whether equity or debt, by us, or the possibility of such issuance, may cause the market price of our common stock to decline. The incurrence of indebtedness could result in increased fixed payment obligations, and we may be required to agree to certain restrictive covenants, such as limitations on our ability to incur additional debt, limitations on our ability to acquire, sell or license intellectual property rights and other operating restrictions that could adversely impact our ability to conduct our business. We could also be required to seek funds through arrangements with collaborative partners or otherwise at an earlier stage than otherwise would be desirable, and we may be required to relinquish rights to some of our technologies or otherwise agree to terms that are unfavorable to us, any of which may have a material adverse effect on our business, operating results and prospects. In addition, raising additional capital through the issuance of equity or convertible debt securities would cause dilution to holders of our equity securities, and may affect the rights of then-existing holders of our equity securities. Even if we believe that we have sufficient funds for our current or future operating plans, we may seek additional capital if market conditions are favorable or if we have specific strategic considerations.

Risks Related to Our Business and Operations

We are a development stage company with a limited history of operations and no products with marketing authorization in any jurisdiction, and we cannot assure you that we will ever have a commercialized product.

We are a development stage medical device company with a limited operating history, and we currently do not have any products authorized for commercialization in any country or jurisdiction or any source of revenue. We have been engaged in research and product development since our inception in 2014 and have invested all of our time and resources in developing our technology and the Vicarious Surgical System, which we intend to commercialize initially for use in ventral hernia repair procedures, followed by subsequent indications. The future success of our business will depend on our ability to obtain regulatory authorization to market our Vicarious Surgical System, drive adoption, successfully introduce new surgical applications for the Vicarious Surgical System, establish our sales force and distribution network, and control costs, all of which we may be unable to do. We have a limited history of operations upon which you can evaluate our business and our operating expenses are increasing. Our lack of a significant operating history also limits your ability to make a comparative evaluation of us, the Vicarious Surgical System and our prospects.

If we do not successfully manage the development and launch of the Vicarious Surgical System, our business, operating and financial results and condition could be adversely affected.

We aim to launch the Vicarious Surgical System initially for use in ventral hernia repair procedures, but to later expand the product to other abdominal surgical applications, including gynecological, urological and general surgery uses. We face risks associated with developing and launching the Vicarious Surgical System for the first indication specific use and other surgical applications. We are in the process of developing the Vicarious Surgical System, and will need to complete beta testing, verification and validation prior to filing de novo authorization with FDA. If we encounter development or manufacturing challenges or discover errors during our development cycle, the launch dates of the initial and new surgical applications may be delayed, which will cause delays in our ability to achieve our forecasted results. The expenses or losses associated with unsuccessful product development or launch activities or lack of market acceptance of the Vicarious Surgical System could adversely affect our business or financial condition.

The market for the Vicarious Surgical System and the use of robotic-assisted surgical technology is rapidly evolving, and increasingly competitive, as the healthcare industry is undergoing significant structural change, which makes it difficult to forecast demand for our product candidates and technologies.

The market for the Vicarious Surgical System and the use of robotic-assisted surgical technology is rapidly evolving, and it is uncertain whether we will achieve and sustain high levels of demand and market adoption. Our future financial performance will depend in part on growth in this market and on our ability to adapt to the changing demands of customers. It is difficult to predict the future growth rate and size of our target market. Negative publicity concerning the Vicarious Surgical System could limit market acceptance of the Vicarious Surgical System. If our customers do not perceive the benefits of the Vicarious Surgical System, when or if it is authorized for marketing, or if the Vicarious Surgical System does not attract new customers, then our market may not develop at all, or it may develop more slowly than we expect. Our success will depend to a substantial extent on the willingness of healthcare organizations to increase their use of our technology and our ability to demonstrate the value of our technology relative to competing products to existing and potential customers. If healthcare organizations do not recognize or acknowledge the benefits of the Vicarious Surgical System or if we are unable to reduce healthcare costs or drive positive health outcomes, then the market for our solutions might not develop at all, or it might develop more slowly than we expect.

Because our markets are highly competitive, customers may choose to purchase our competitors’ products or services or may not accept the Vicarious Surgical System for use in ventral hernia repair procedures, which would result in a reduced ability to generate future revenue.

Robotic-assisted surgery using the Vicarious Surgical System is a technology that competes with established and emerging treatment options in both disease management and reconstructive medical procedures. These competitive treatment options include conventional open surgery and minimally invasive approaches. Some of these procedures are widely accepted in the medical community and, in many cases, have a long history of use. Studies could be published that show that other treatment options are more beneficial and/or cost-effective than robotic-assisted surgery. We cannot be certain that physicians will use our product candidates to replace or supplement established treatments or that our product candidates will be competitive with current or future technologies, when or if those product candidates are authorized for marketing.

Additionally, we face or expect to face competition from companies that develop or have developed robotic-assisted surgical systems and products. Companies have introduced products in the field of robotic surgery or have made explicit statements about their efforts to enter the field including, but not limited to, the following companies: Intuitive Surgical, Inc.; Johnson & Johnson (including their wholly-owned subsidiaries Ethicon Endo-Surgery, Inc., Auris Health, Inc. and Verb Surgical Inc.); Medtronic plc (including their wholly-owned subsidiary Covidien LP); Virtual Incision Corporation; CMR Surgical Ltd.; and Stryker Corporation. Other companies with substantial experience in industrial robotics could potentially expand into the field of surgical robotics and become competitors. Our ability to generate future revenue may be reduced due to pricing pressure if our competitors develop and market products that are more effective or less expensive than our future commercial product candidates. If we are unable to compete successfully, our ability to generate future revenue will suffer, which could have a material adverse effect on our business, financial condition, result of operations, or cash flows.

Our success depends upon market acceptance of the Vicarious Surgical System for use in ventral hernia repair procedures, our ability to develop and commercialize the Vicarious Surgical System for use in ventral hernia repair procedures and additional surgical applications and generate revenues, and our ability to identify new markets for our technology.

We have developed and are engaged in the development of the Vicarious Surgical System initially for use in ventral hernia repair procedures. Achieving physician, patient, and third-party payor acceptance of robotic-assisted surgery as a preferred method of performing surgery is crucial to our success. Our success will depend on the acceptance of the Vicarious Surgical System in the United States and global health-care markets, when or if it is authorized for marketing in those jurisdictions. We are faced with the risk that the marketplace will not be receptive to the Vicarious Surgical System over competing products, including traditional and existing robotic-assisted surgical procedures used in hospitals and ASCs, and that we will be unable to compete effectively. Factors that could affect our ability to successfully commercialize the Vicarious Surgical System for use in ventral hernia repair procedures and to commercialize any potential future product candidates and technologies include:

Even if we can prove the safety and effectiveness of the Vicarious Surgical System and it receives marketing authorization, hospitals, ASCs, or surgeons may elect not to use it. In addition, hospitals, ASCs and surgeons may be slow to adopt the Vicarious Surgical System because of the perceived liability risks arising from the use of new products and the uncertainty of reimbursement from third-party payors, particularly in light of ongoing healthcare reform initiatives and the evolving healthcare environment.

Broad use of the Vicarious Surgical System will require training of surgical teams. We expect that there will be a learning process involved for surgical teams to become proficient in the use of the Vicarious Surgical System. Market acceptance could be delayed due to the time required to complete this training. We may not be able to rapidly train surgical teams in numbers sufficient to generate adequate demand for our product candidates. We cannot assure investors that the Vicarious Surgical System or any future product candidates and technologies will gain broad market acceptance. If the market for the Vicarious Surgical System or any future product candidates and technologies fail to develop or develops more slowly than expected, or do not achieve or sustain market acceptance, our business and operating results would be materially and adversely affected.

Surgeons, hospitals, ASCs and distributors may have existing relationships with other medical device companies that make it difficult for us to establish new relationships with them, and as a result, we may not be able to sell and market the Vicarious Surgical System effectively.

We believe that to sell and market the Vicarious Surgical System effectively, when or if the product receives marketing authorization, we must establish relationships with key surgeons, hospitals and ASCs in the field of abdominal surgery. Many of these key surgeons, hospitals and ASCs already have long-standing relationships with large, well-known companies that dominate the medical device industry through collaborative research programs and other relationships. Because of these existing relationships, some of which may be contractually enforced, surgeons, hospitals and ASCs may be reluctant to adopt the Vicarious Surgical System, particularly if it competes with or has the potential to compete with products and technologies supported by these existing relationships or through their own collaborative research programs. Even if these surgeons, hospitals and ASCs purchase the Vicarious Surgical System, they may be unwilling to enter into collaborative relationships with us to promote joint marketing programs or to provide us with clinical and financial data.

Any failure in our efforts to train surgeons, hospital or ASC staff could result in lower than expected product sales and potential liabilities.

A critical component of our future sales and marketing efforts is the training of a sufficient number of surgeons and hospital staff to properly use the Vicarious Surgical System, when or if it is authorized for marketing. We rely on surgeons and hospital staff to devote adequate time to learn to use our future product candidates and technologies. Convincing surgeons, hospital and ASC staff to dedicate the time and resources necessary for adequate training in the use of the Vicarious Surgical System will be challenging, and we cannot assure you we will be successful in these efforts. If surgeons, hospital or ASC staff are not properly trained, they may misuse or ineffectively use the Vicarious Surgical System. If nurses or other members of the hospital or ASC staff are not adequately trained to assist in using the Vicarious Surgical System, surgeons may be unable to use the Vicarious Surgical System. Insufficient training may result in unsatisfactory patient outcomes, patient injury and related liability or negative publicity, which could have an adverse effect on our product sales or create substantial potential liabilities.

Robotic-assisted surgical device development is costly and involves continual technological change, which may render the Vicarious Surgical System obsolete.

The market for robotic-assisted surgical devices is characterized by rapid technological change, medical advances and evolving industry standards. Any one of these factors could reduce the demand for the Vicarious Surgical System, when or if it is authorized for marketing, or require substantial resources and expenditures for research, design and development to avoid technological or market obsolescence.

Our success will depend on our ability to enhance our current technology, services and systems and develop or acquire and market new technologies to keep pace with technological developments and evolving industry standards, while responding to changes in customer needs. A failure to adequately develop or acquire device enhancements or new devices that will address changing technologies and customer requirements adequately, or to introduce such devices on a timely basis, may have a material adverse effect on our business, financial condition and results of operations.

We might have insufficient financial resources to improve existing devices, advance technologies and develop new devices at competitive prices. Technological advances by one or more competitors or future entrants into the field may result in the Vicarious Surgical System becoming non-competitive or obsolete, which may decrease revenues and profits and adversely affect our business and results of operations.

We may encounter significant competition across our existing and future planned product candidates and technologies and in each market in which we sell or plan to sell the Vicarious Surgical System from various companies, many of which have greater financial and marketing resources than us. Our primary competitors include Intuitive Surgical, Johnson& Johnson (including their wholly-owned subsidiaries Ethicon Endo-Surgery, Inc., Auris Health, Inc. and Verb Surgical Inc.), and Medtronic, which are currently the top manufacturers of robotic-assisted surgical devices.

In addition, our primary competitors, which are well-established medical device manufacturers with significant resources, may engage in aggressive marketing tactics. Competitors may also possess the ability to commercialize additional lines of products, bundle products or offer higher discounts and incentives to customers in order to gain a competitive advantage. If the prices of competing products are lowered as a result, we may not be able to compete effectively.

We are highly dependent upon the continued contributions of our co-founder and Chief Executive Officer, Adam Sachs, and our co-founder and Chief Technology Officer, Sammy Khalifa. The loss of their services could harm our business, and if we are unable to attract, recruit, train, retain, motivate and integrate key personnel, we may not achieve our goals.

Our future success depends on our ability to attract, recruit, train, retain, motivate and integrate key personnel, including our co-founder and Chief Executive Officer, Adam Sachs, and our co-founder and Chief Technology Officer, Sammy Khalifa, as well as our management team and our research and development, manufacturing, sales and marketing personnel. Our future business and results of operations depend in significant part upon the continued contributions of Messrs. Sachs and Khalifa. If we were to lose their services or if they fail to perform in their current positions, or if we are not able to attract and retain skilled employees in addition to Messrs. Sachs and Khalifa, this could adversely affect the development and implementation of our business plan and substantially harm our business. Competition for qualified personnel is intense.

In addition, we rely upon technical and scientific employees or third-party contractors to effectively establish, manage and grow our business. Consequently, we believe that our future viability will depend largely on our ability to attract and retain highly skilled robotics engineers, artificial intelligence engineers, software engineers, hardware engineers and optical engineers, as well as other managerial, sales, scientific and technical personnel. In order to effectively recruit these personnel, we may need to pay higher compensation or fees to our employees or consultants than we currently expect, and such higher compensation payments may have a negative effect on our operating results. Competition for experienced, high-quality personnel is intense, and we cannot assure investors that we will be able to recruit and retain such personnel. Our growth depends, in particular, on attracting and retaining highly trained sales personnel with the necessary technical background and ability to understand the Vicarious Surgical System at a technical level to effectively identify and sell to potential new customers and develop new uses for the Vicarious Surgical System. Because of the technical and complex nature of the Vicarious Surgical System and the dynamic market in which we compete in, any failure to attract, recruit, train, retain, motivate and integrate qualified personnel could materially delay development of the Vicarious Surgical System and harm our operating results and growth prospects.

We will need to expand our organization, and we may experience difficulties in recruiting needed additional employees and consultants, which could disrupt our operations.

As our development and commercialization plans and strategies develop, we will need additional managerial, operational, sales, marketing, financial, legal and other resources. The competition for qualified personnel in the medical device industry is intense. Due to this intense competition, we may be unable to attract and retain the qualified personnel necessary for the development of our business or to recruit suitable replacement personnel.

Our management may need to divert a disproportionate amount of our attention away from our day-to-day activities and devote a substantial amount of time to managing these growth activities. We may not be able to effectively manage the expansion of our operations, which may result in weaknesses in our infrastructure, operational mistakes, loss of business opportunities, loss of employees and reduced productivity among remaining employees. Our expected growth could require significant capital expenditures and may divert financial resources from other projects, such as the development of additional surgical applications for the Vicarious Surgical System. If our management is unable to effectively manage our growth, our expenses may increase more than expected, our ability to generate and/or grow revenue could be reduced and we may not be able to implement our business strategy. Our future financial performance and our ability to commercialize the Vicarious Surgical System and compete effectively will depend, in part, on our ability to effectively manage any future growth.

We have no experience in marketing and selling the Vicarious Surgical System and if we are unable to successfully commercialize the Vicarious Surgical System, our business and operating results will be adversely affected.

We have no experience marketing and selling the Vicarious Surgical System, should we receive marketing authorization from the FDA and other regulatory authorities. We currently intend to sell the Vicarious Surgical System to hospitals and ASCs. Future sales of the Vicarious Surgical System will depend in large part on our ability to effectively market and sell the Vicarious Surgical System, successfully manage and expand our sales force, and increase the scope of our marketing efforts. We may also enter into distribution arrangements in the future. Because we have limited experience in marketing and selling the Vicarious Surgical System, our ability to forecast demand, the infrastructure required to support such demand and the sales cycle to customers is unproven. If we do not build an efficient and effective marketing and sales force, our business and operating results will be adversely affected.

We expect to generate a portion of our revenue internationally in the future and may become subject to various additional risks relating to our international activities, including any clinical trials or product studies conducted outside of the United States, which could adversely affect our business, operating results and financial condition.

We intend to generate revenues from international sources as we expand our sales and marketing opportunities internationally. We have limited experience operating internationally and engaging in international business involves a number of difficulties and risks, including:

We dedicate significant resources to our international operations and are unable to manage these risks effectively, our business, operating results and financial condition may be adversely affected.

If we experience decreasing prices for our product candidates and technologies and are unable to reduce our expenses, including the per unit cost of producing our product candidates and technologies, there may be a material adverse effect on our business, results of operations, financial condition and cash flows.

We may experience decreasing prices for the Vicarious Surgical System upon regulatory authorization due to pricing pressure from managed care organizations and other third-party payors and suppliers, increased market power of our payors as the medical device industry consolidates, and increased competition among suppliers, including manufacturing services providers. If the prices for the Vicarious Surgical System decrease and we are unable to reduce our expenses, including the cost of sourcing materials, logistics and the cost to manufacture the Vicarious Surgical System, our business, results of operations, financial condition and cash flows may be adversely affected. To the extent that we engage in sales to large hospital networks, we may be subject to procurement discounts, which could have a negative impact on the prices of our product candidates and technologies.

We may experience manufacturing problems or delays that could limit the growth of our revenue or increase our losses.

We may encounter unforeseen situations that would result in delays or shortfalls in our production as well as delays or shortfalls caused by our outsourced manufacturing suppliers and by other third-party suppliers who manufacture components for the Vicarious Surgical System. The FDA has established comprehensive and prescriptive regulations for manufacturers of finished medical devices and device components, which require them to establish and maintain processes and procedures to adequately control device manufacturing operations and environmental conditions that could adversely affect product quality and impact patient safety. Clean room standards are an example of these requirements. The failure of us or our third-party component manufacturers or suppliers to comply with applicable standards and regulatory requirements could delay the production of the Vicarious Surgical System.

We or our third-party component manufacturers or suppliers may encounter difficulties in scaling up or maintaining production relating to the Vicarious Surgical System, including:

If we are unable to keep up with demand for the Vicarious Surgical System, our future revenue could be impaired, market acceptance for the Vicarious Surgical System could be adversely affected and our customers might instead purchase our competitors’ products. Our inability to successfully manufacture the Vicarious Surgical System would have a material adverse effect on our operating results.

We rely on limited or sole suppliers for some of the materials and components used in the Vicarious Surgical System, and may not be able to find replacements or immediately transition to alternative suppliers, which could require us to redesign aspects of the Vicarious Surgical System and which would have a material adverse effect on our business, financial condition, results of operations and reputation.

We rely on limited or sole suppliers for certain materials and components that are used in the Vicarious Surgical System. While we periodically forecast our needs for such materials and enters into standard purchase orders with them, we do not have long-term contracts with some of these suppliers. If we were to lose such suppliers, or if such suppliers were unable to fulfill our orders or to meet our manufacturing specifications, there can be no assurance that we will be able to identify or enter into agreements with alternative suppliers on a timely basis or on acceptable terms, if at all. Furthermore, if we are required to change the manufacturer of a key component of the Vicarious Surgical System, we would be required to verify that the new manufacturer maintains facilities and procedures that comply with quality standards and with all applicable regulations and guidelines, and we may be required to redesign aspects of the Vicarious Surgical System to accommodate the new component, which would result in significant delays and additional costs. An interruption in our operations could occur if we encounter delays or difficulties in redesigning the Vicarious Surgical System, or securing these materials and components, or if the quality of the materials and components supplied do not meet our requirements, or if we cannot then obtain an acceptable substitute. The time and effort required to redesign the Vicarious Surgical System, or to qualify a new supplier and ensure that the new materials and components provide the same or better quality results could result in significant additional costs. Any such interruption could significantly affect our business, financial condition, results of operations and reputation. While we believe that our supplies of components and materials are currently sufficient for us to continue the development of our product candidates and technologies without a disruption to our business, in the event that we must replace one of our suppliers, there can be no assurance that we can maintain this level of inventory in the future.

Acquisitions, joint ventures or strategic alliances could disrupt our business, cause dilution to our stockholders and otherwise harm our business.

We may acquire other businesses or product candidates and technologies, as well as pursue strategic alliances, joint ventures, technology licenses or investments in complementary businesses. We have not engaged in any of these strategic transactions to date, except for our Center of Excellence partners, and our ability to do so successfully is unproven. Any of these strategic transactions could be material to our financial condition and operating results and expose us to many risks, including:

Foreign acquisitions involve unique risks in addition to those mentioned above, including those related to the integration of operations across different cultures and languages, currency risks and the particular economic, political and regulatory risks associated with specific countries.

In addition, the anticipated benefit of any acquisition may not materialize. Future acquisitions or dispositions could result in potentially dilutive issuances of our equity securities, the incurrence of debt, contingent liabilities or amortization expenses or write-offs of goodwill, any of which could harm our financial condition. We cannot predict the number, timing or size of future joint ventures, strategic alliances or acquisitions, if any, or the effect that any such transactions might have on our operating results.

If we do not successfully develop, optimize and operate our sales and distribution channels or we do not effectively expand and update infrastructure, our operating results and customer experience may be negatively impacted.

If we do not adequately predict market demand or otherwise develop, optimize and operate our sales and distribution channels successfully, it could result in excess or insufficient inventory or fulfillment capacity, increased costs, or immediate shortages in product or component supply, or harm our business in other ways. In addition, if we do not maintain adequate infrastructure to enable us to, among other things, manage our purchasing and inventory, it could negatively impact our operating results.

If we are unable to continue the development of an adequate sales and marketing organization and/or if our direct sales organization is not successful, we may have difficulty achieving market awareness and selling our product and technologies in the future.

We must develop and grow our sales and marketing organization and enter into partnerships or other arrangements to market and sell our product candidates and technologies and/or collaborate with third parties, including distributors and others, to market and sell our product candidates and technologies to develop and maintain the commercial success of the Vicarious Surgical System, when or if we are authorized for marketing, and to achieve commercial success for any of our future product candidates and technologies. Developing and managing a direct sales organization is a difficult, expensive and time-consuming process.

To develop our sales and marketing organization to successfully achieve market awareness and sell our product candidates and technologies after they receive appropriate marketing authorization, we must:

We may not be able to successfully manage our sales force or increase our product sales at acceptable rates.

If we are unable to establish and maintain adequate sales and marketing capabilities or enter into and maintain arrangements with third parties to sell and market the Vicarious Surgical System, our business may be harmed.

We cannot guarantee that we will be able to establish and maintain an adequate volume of sales in the future. A substantial reduction in sales could have a material adverse effect on our operating performance. To the extent that we enter into additional arrangements with third parties to perform sales or marketing services in the United States, Europe or other countries, our product margins could be lower than if we directly marketed and sold the Vicarious Surgical System. To the extent that we enter into co-promotion or other marketing and sales arrangements with other companies, any revenue received will depend on the skills and efforts of others, and we cannot predict whether these efforts will be successful. In addition, the growth of market acceptance of the Vicarious Surgical System by healthcare practitioners outside of the United States will largely depend on our ability to continue to demonstrate the relative safety, effectiveness, reliability, cost-effectiveness and ease of use of the Vicarious Surgical System. If we are unable to do so, we may not be able to increase product revenue from our sales efforts in other countries. If we are unable to establish and maintain adequate sales, marketing and distribution capabilities, independently or with others, our future revenue may be reduced and our business may be harmed.

Quality problems could lead to recalls or safety alerts and/or reputational harm and could have a material adverse effect on our business, results of operations, financial condition and cash flows.

The quality of our product candidates and technologies and future commercial product candidates and technologies is very important to us and our customers due to the serious and costly consequences of product failure. Our success depends on the quality and reliability of the Vicarious Surgical System. Our business exposes us to potential product liability risks that are inherent in the design, manufacture, and marketing of medical devices. While we take measures to ensure that components, product candidates and technologies are manufactured to stringent quality specifications, the Vicarious Surgical System incorporates mechanical parts, electrical components, optical components, packaging and computer software, any of which may contain errors or exhibit failures, especially when the finished system is first introduced. In addition, new product candidates or modifications may contain undetected errors or performance problems that, despite testing, are discovered only after marketing authorization and commercial shipment. Because the Vicarious Surgical System is being designed to perform complex surgical procedures, due to the serious and costly consequences of product failure, we and our future customers have an increased sensitivity to such defects.

Although the Vicarious Surgical System is subject to stringent quality processes and controls, we cannot provide assurance that our system will not experience component aging, errors, performance problems, manufacturing nonconformities, or design defects or that unexpected risks to users or patients will not be discovered during commercial use. If we experience product flaws or performance problems, any or all of the following could occur:

Additionally, the manufacture and production of the Vicarious Surgical System requires a highly controlled and clean environment to minimize particles and other yield- and quality-limiting contaminants. Weaknesses in process control or minute impurities in materials may result in defective products. If we are not able to maintain stringent quality controls, or if contamination problems arise, we may experience delays in development and commercialization efforts and may be subject to regulatory enforcement actions, which would harm our business and results of operations.

If we or our third-party component manufacturers or suppliers fail to meet any applicable product quality standards and the Vicarious Surgical System is the subject of recalls, safety alerts or other regulatory enforcement actions, our reputation could be damaged, we could lose customers, and our revenue and results of operations could decline.

If we are not able to develop and release new surgical applications for the Vicarious Surgical System, or successful enhancements, new features and modifications to the Vicarious Surgical System or to achieve adequate clinical utility, our business, financial condition and results of operations could be adversely affected.

The markets in which we operate are characterized by rapid technological change, frequent new product and service introductions and enhancements, changing customer demands, and evolving industry standards. The introduction of products embodying new technologies can quickly make existing products obsolete and unmarketable. Additionally, changes in laws and regulations could impact the usefulness of the Vicarious Surgical System and could necessitate changes or modifications to the Vicarious Surgical System to accommodate such changes. We invest substantial resources in researching and developing new developments to the Vicarious Surgical System and enhancing the Vicarious Surgical System by incorporating additional features, improving functionality, and adding other improvements to meet customers’ evolving needs. The success of any enhancements, improvements or any new features to the Vicarious Surgical System, when or if authorized for marketing by the FDA, depends on several factors, including timely completion, competitive pricing, adequate quality testing, integration with new and existing technologies and third-party partners’ technologies and overall market acceptance. We may not succeed in developing, marketing and delivering on a timely and cost-effective basis enhancements or improvements to the Vicarious Surgical System or any new product candidates and technologies that respond to continued changes in market demands or new customer requirements, and any enhancements or improvements to the Vicarious Surgical System or any new solutions may not achieve market acceptance or authorization. Since developing the Vicarious Surgical System is complex, the timetable for the release of new enhancements is difficult to predict, and we may not offer new updates as rapidly as our customers require or expect. Any new product candidates and technologies that we develop may not be introduced in a timely or cost-effective manner, may contain errors or defects, or may not achieve the broad market acceptance necessary to generate sufficient revenue. Moreover, even if we introduce new product candidates and technologies, we may experience a decline in revenue from the Vicarious Surgical System that is not offset by revenue from the new product candidates and technologies. For example, customers may delay making purchases of new product candidates and technologies to permit them to make a more thorough evaluation of these product candidates and technologies or until industry and marketplace reviews become widely available. Customers may also delay purchasing a new product because their existing Vicarious Surgical System or other devices continues to meet their needs. Some customers may hesitate to migrate to a new product due to concerns regarding the performance of the new product. In addition, we may lose existing customers who choose a competitor’s products. This could result in a temporary or permanent revenue shortfall and adversely affect our business, financial condition and results of operations.

The introduction of new products and solutions by competitors, the development of entirely new technologies to replace existing offerings or shifts in healthcare benefits trends could make our future commercial products and technologies obsolete or adversely affect our business, financial condition and results of operations. We may experience difficulties with industry standards, design or marketing that could delay or prevent our development, introduction or implementation of new product candidates and technologies, enhancements, additional features or capabilities. If customers do not widely purchase and adopt our future product candidates and technologies, we may not be able to realize a return on our investment. If we do not accurately anticipate customer demand or if we are unable to develop, license or acquire new features and capabilities on a timely and cost-effective basis, or if such enhancements do not achieve market acceptance, it could result in adverse publicity, loss of revenue or market acceptance or claims by customers brought against us, each of which could have a material and adverse effect on our reputation, business, results of operations and financial condition.

Unfavorable global economic conditions could adversely affect our business, financial condition or results of operations.

Our results of operations could be adversely affected by general conditions in the global economy and in the global financial markets, including changes in inflation, interest rates and overall economic conditions and uncertainties. To the extent inflation or other factors increase our business costs, it may not be feasible to offset higher costs through manufacturing efficiencies. An economic downturn could result in a variety of risks to our business, including weakened demand for our future product candidates and technologies and our inability to raise additional capital when needed on acceptable terms, if at all. A weak or declining economy could also result in further constraints on our third-party component manufacturers and suppliers or cause future customers to delay making payments for our product candidates and technologies. Any of the foregoing could harm our business and we cannot anticipate all of the ways in which the current economic climate and financial market conditions could adversely affect our business.

Geopolitical conflicts could potentially affect our sales and disrupt our operations and could have a material adverse impact on us.

Geopolitical conflicts could adversely impact our operations or those of our suppliers, manufacturers or customers. The extent to which these events impact our operations will depend on future developments, which are highly uncertain and cannot be predicted with confidence. If the uncertainty surrounding geopolitical conflicts and in the global marketplace continues, or if we, or any of our suppliers, manufacturers or customers encounter any disruptions to our or their respective operations or facilities, then we or they may be prevented or delayed from effectively operating our or their business, respectively, and the marketing and sale of our product candidates and our financial results could be adversely affected.

The requirements of being a public company may strain our resources and divert management’s attention, which could adversely affect our business, results of operations, and financial condition.

We have incurred and will continue to incur significant legal, accounting and other expenses that we did not incur as a private company, including costs associated with public company reporting requirements. We will also continue to incur costs associated with corporate governance requirements, including requirements under the Sarbanes-Oxley Act, as well as rules implemented by the SEC and the NYSE. We expect that the requirements of these rules and regulations will continue to increase our legal, accounting, and financial compliance costs, make some activities more difficult, time-consuming, and costly, and place significant strain on our personnel, systems, and resources. For example, our management team will need to devote substantial time regarding operations as a public company and compliance with applicable laws and regulations. As a result of the complexity involved in complying with the rules and regulations applicable to public companies, our management’s attention may be diverted from other business concerns, which could harm our business, results of operations, and financial condition.

Our failure to maintain compliance with the NYSE’s continued listing requirements could result in the delisting of our Class A common stock.

Our Class A common stock is listed on the New York Stock Exchange (the “NYSE”). In order to maintain this listing, we must satisfy minimum financial and other requirements. On September 20, 2023, we received notice from the NYSE notifying us that, because average closing share price for the Company’s Class A common stock was less than $1.00 over a consecutive 30 trading-day period, the Company no longer met the NYSE’s continued listing criterion relating to minimum share price. On June 12, 2024, the Company effected a 1-for-30 reverse stock split of its issued and outstanding shares of Class A and Class B common stock. On July 26, 2024, we were notified by the NYSE that our Class A common stock had an average closing share price of at least $1.00 over the 30 trading-day period ending on July 26, 2024, and therefore we had regained compliance with the applicable NYSE continued listing standard.

The perception among investors that we are at a heightened risk of delisting could negatively affect the market price and trading volume of our Class A common stock. If our Class A common stock is delisted from the NYSE, the delisting could: substantially decrease trading in our Class A common stock; adversely affect the market liquidity of our Class A common stock as a result of the loss of market efficiencies associated with the NYSE and the loss of federal preemption of state securities laws; adversely affect our ability to issue additional securities or obtain additional financing in the future on acceptable terms, if at all; result in the potential loss of confidence by investors, suppliers, partners and employees and fewer business development opportunities; and result in limited news and analyst coverage. Additionally, the market price of our Class A common stock may decline further, and stockholders may lose some or all of their investment.

We have identified a material weakness in our internal control over financial reporting. If we are unable to successfully remediate this material weakness in our internal control over financial reporting, we may not be able to report our financial condition or results of operations accurately or in a timely manner, which may adversely affect investor confidence in us and, as a result, materially and adversely affect our business and the value of our Class A common stock.

We have identified material weaknesses in our internal control over financial reporting for the years ended December 31, 2024, and 2023. The material weaknesses we identified were as follows:

These material weaknesses could result in a misstatement of account balances or disclosures that would result in a material misstatement to our annual or interim financial statements that would not be prevented or detected. Had we performed an evaluation of our internal control over financial reporting in accordance with Section 404, additional control deficiencies may have been identified by management, and those control deficiencies could have also represented one or more material weaknesses.

While we have taken steps to remediate the material weaknesses, we cannot assure you that these measures will significantly improve or remediate the material weaknesses described above. We also cannot assure you that we have identified all or that we will not have additional material weaknesses in the future. Accordingly, a material weakness may still exist when we report on the effectiveness of our internal control over financial reporting for purposes of our attestation when required by reporting requirements under the Exchange Act or Section 404 of the Sarbanes-Oxley Act. Further, while we remain an emerging growth company, we will not be required to include an attestation report on internal control over financial reporting issued by our independent registered public accounting firm.

We expect to incur additional costs to remediate these control deficiencies, though there can be no assurance that our efforts will be successful or avoid potential future material weaknesses. If we are unable to successfully remediate our existing or any future material weaknesses in our internal control over financial reporting, or if we identify any additional material weaknesses, the accuracy and timing of our financial reporting may be adversely affected, we may be unable to maintain compliance with securities law requirements regarding timely filing of periodic reports in addition to applicable stock exchange listing requirements, investors may lose confidence in our financial reporting, and our stock price may decline as a result. We also could become subject to investigations by NYSE, the SEC or other regulatory authorities.

Our ability to use net operating losses to offset future income may be subject to certain limitations.

As of December 31, 2024, we had federal net operating loss carry forwards (“NOLs”) to offset future taxable income of approximately $165.1 million, of which approximately $2.8 million will expire at various dates from 2034 through 2037, if not utilized. A lack of future taxable income would adversely affect our ability to utilize these NOLs. In addition, under Section 382 of the Internal Revenue Code of 1986, as amended (the “Code”), a corporation that undergoes an “ownership change” is subject to limitations on its ability to utilize its pre-change NOLs and other pre-change tax attributes (such as research tax credits) to offset post-change taxable income. For these purposes, an ownership change generally occurs where the equity ownership of one or more stockholders or groups of stockholders who owns at least 5% of a corporation’s stock increases its ownership by more than 50 percentage points over its lowest ownership percentage within a three-year period (calculated on a rolling basis). Our existing NOLs may be subject to limitations arising out of previous ownership changes and we may be limited as to the amount that can be utilized each year as a result of such previous ownership changes. In addition, future changes in our stock ownership, including future offerings, as well as other changes that may be outside of our control, could result in additional ownership changes under Section 382 of the Code. Our NOLs may also be impaired under similar provisions of state law. We have not conducted a study to assess whether an ownership change has occurred, whether there have been multiple ownership changes since inception or whether there has been an ownership change as the result of the Business Combination due to the significant complexity and costs associated with such a study. We have recorded a full valuation allowance related to our NOLs and other deferred tax assets due to the uncertainty of the ultimate realization of the future benefits of those assets.

In addition to the limitations discussed above under Sections 382 of the Code, the utilization of NOLs incurred in taxable years beginning after December 31, 2017, are subject to limitations, as modified by the Coronavirus Aid, Relief, and Economic Security Act (the “CARES Act”). In general, NOLs generated in taxable years beginning after December 31, 2017 may offset no more than 80 percent of such year’s taxable income and there is no ability for such NOLs to be carried back to a prior taxable year. The CARES Act modifies this limitation on the deduction of NOLs and provides that NOLs arising in taxable years beginning after December 31, 2017 and before January 1, 2021, may be carried back to each of the five taxable years preceding the tax year of such loss, but NOLs arising in taxable years beginning after December 31, 2020 may not be carried back. In addition, the CARES Act eliminates the limitation on the deduction of NOLs to 80 percent of current year taxable income for taxable years beginning before January 1, 2021. As a result of such limitation, we may be required to pay federal income tax in some future year notwithstanding that we have a net loss for all years in the aggregate.

Changes in our effective tax rate or disallowance of our tax positions may adversely affect our financial position and results of operations.

We are subject to income and other taxes in the United States and foreign jurisdictions. The amount of income taxes we pay is subject to our interpretation and application of tax laws in jurisdictions in which we file. Changes in current or future laws or regulations, the imposition of new or changed tax laws or regulations or new interpretations by taxing authorities or courts could affect our results of operations and lead to volatility with respect to tax expenses and liabilities from period to period. For example, limitations on the ability of taxpayers to claim and utilize foreign tax credits and the deferral of certain tax deductions until earnings outside of the United States are repatriated to the United States could impact the tax treatment of future foreign earnings. In addition, on August 16, 2022, the U.S. government enacted the Inflation Reduction Act of 2022 (the “Inflation Reduction Act”), into law, which includes a new corporate alternative minimum tax beginning in fiscal 2024 and an excise tax of 1% tax on the fair market value of net stock repurchases made after December 31, 2022. We are evaluating the potential impact the Inflation Reduction Act may have on our financial position and results of operations.

We could be adversely affected by violations of the U.S. Foreign Corrupt Practices Act and other worldwide anti-bribery laws by us or our agents.

We are subject to the U.S. Foreign Corrupt Practices Act (“FCPA”), which prohibits companies and their intermediaries from making payments in violation of law to non-U.S. government officials for the purpose of obtaining or retaining business or securing any other improper advantage. Our possible future reliance on independent distributors or strategic partners to sell the Vicarious Surgical System internationally demands a high degree of vigilance in enforcing our policy against participation in corrupt activity, because these distributors or strategic partners could be deemed to be our agents, and we could be held responsible for their actions. Other U.S. companies in the medical device and pharmaceutical fields have faced criminal penalties under the FCPA for allowing their agents to deviate from appropriate practices in doing business with such non-U.S. government officials. We are also subject to similar anti-bribery laws in the jurisdictions in which we plan to operate, including the United Kingdom’s Bribery Act of 2010, which also prohibits commercial bribery and makes it a crime for companies to fail to prevent bribery. We have limited experience in complying with these laws and in developing procedures to monitor compliance with these laws by our agents. These laws are complex and far-reaching in nature, and, as a result, we cannot assure investors that we would not be required in the future to alter one or more of our practices to be in compliance with these laws or any changes in these laws or the interpretation thereof.

Any violations of these laws, or allegations of such violations, could disrupt our operations, involve significant management distraction, involve significant costs and expenses, including legal fees, and could result in a material adverse effect on our business, prospects, financial condition, or results of operations. We could also incur severe penalties, including criminal and civil penalties, disgorgement, and other remedial measures.

Risks Related to Healthcare Industry Shifts and Changing Regulations

We are subject to extensive government regulation, which could restrict the development, marketing, sale and distribution of our product candidates and technologies and could cause us to incur significant costs.

We and the Vicarious Surgical System are subject to extensive pre-market and post-market regulation by the FDA and various other federal, state, local and foreign government authorities. Government regulation of medical devices is meant to assure their safety and effectiveness, and includes requirements for, among other things:

The laws and regulations to which we and our product candidates, technologies and future commercial product candidates will be subject are complex and subject to periodic changes. Regulatory changes could result in restrictions on our ability to carry on or expand our operations, and may result in higher than anticipated costs or lower than anticipated sales.

Before a new medical device, or a significant modification of a medical device, including a new use of, or claim for, an existing product, can be marketed in the United States, it must first receive either 510(k) clearance, De Novo authorization, or PMA from the FDA, unless an exemption applies. In the 510(k) clearance process, the FDA must determine that a proposed device is “substantially equivalent” to a device legally on the market, known as a “predicate” device, with respect to intended use, technology and safety and effectiveness, in order to clear the proposed device for marketing. Clinical data is sometimes required to support substantial equivalence.

Obtaining marketing authorization for Class II or III medical devices through the 510(k) premarket notification process, the PMA process, or the De Novo classification process can be expensive and time-consuming, and entails significant user fees to the FDA, unless an exemption is available. The FDA’s review of premarket notifications for 510(k) clearance usually takes 90 to 180 days, and review of De Novo classification applications usually takes 120 to 280 days, but both review processes can last longer. In addition, after a device is cleared or authorized under a reclassification order, any modification that could significantly affect the device’s safety or effectiveness, or that would constitute a major change in its intended use, will require a new 510(k) clearance, or possibly another De Novo authorization or a PMA, depending on the extent of the modification and the associated risks.

The De Novo classification process allows a manufacturer whose novel device is automatically classified into Class III to request down-classification of its device to Class I or Class II, on the basis that the device presents low or moderate risk, as an alternative to following the typical Class III device pathway requiring the submission and approval of a PMA application. Under the Food and Drug Administration Safety and Innovation Act of 2012, the FDA is required to classify a device within 120 days following receipt of the De Novo classification request from an applicant; however, the most recent FDA premarket review goals state that the agency will attempt to issue a decision within 150 days of receipt on of all De Novo classification requests received during the year. If the manufacturer seeks reclassification into Class II, the classification request must include a draft proposal for special controls that are necessary to provide a reasonable assurance of the safety and effectiveness of the medical device. The FDA may reject the classification request if it identifies a legally marketed predicate device that would be appropriate for a 510(k) notification or determines that the device is not low to moderate risk or that general controls would be inadequate to control the risks and special controls cannot be developed. De Novo classification requests are subject to user fees, unless a specific exemption applies.

In the PMA approval process, the FDA must determine that a proposed device is safe and effective for its intended use based, in part, on extensive data, including but not limited to, technical, pre-clinical, clinical trial, manufacturing and labeling data. The process for obtaining a PMA is more costly and uncertain and approval can take anywhere from 180 days to, in some cases, more than one year from the time the application is initially filed with the FDA. Modifications to devices that are approved through a PMA application generally require FDA approval of a supplemental PMA application. The Vicarious Surgical System and some of our future product candidates and technologies may require obtaining a PMA. In addition, the FDA may require that we obtain a PMA prior to marketing future changes of the Vicarious Surgical System. Further, we may not be able to obtain additional 510(k) clearances, De Novo authorizations, or PMAs for new product candidates and technologies or for modifications to, or additional indications for, the Vicarious Surgical System in a timely fashion or at all. Delays in obtaining future clearances, authorizations, or approvals could adversely affect our ability to introduce new or enhanced product candidates and technologies in a timely manner, which in turn could harm our revenue and future profitability.

In order to conduct a clinical investigation involving human subjects for the purpose of demonstrating the safety and effectiveness of a medical device, if necessary, for a PMA application, 510(k) premarket notification or De Novo classification request, a company must, among other things, apply for and obtain institutional review board (“IRB”) approval of the proposed investigation. In addition, if the clinical study involves a “significant risk” (as defined by the FDA) to human health, the sponsor of the investigation must also submit and obtain FDA approval of an investigational device exemption (“IDE”) application and follow applicable IDE regulations. Unless IDE-exempt, nonsignificant risk devices are still subject to certain abbreviated IDE requirements; however, an IDE application is not required if such abbreviated requirements are met. We may not be able to obtain any necessary FDA and/or IRB approval to undertake clinical trials in the United States for future devices we develop and intend to market in the United States. If we do obtain such approvals, the FDA may find that our studies do not comply with the IDE or other regulations governing clinical investigations or the data from any such trials may not support marketing authorization of the investigational device. Moreover, certainty that clinical trials will meet desired endpoints, produce meaningful or useful data and be free of unexpected adverse effects, or that the FDA will accept the validity of foreign clinical study data (if applicable) cannot be assured, and such uncertainty could preclude or delay marketing authorization resulting in significant financial costs and reduced revenue.

To ensure compliance with regulatory requirements, medical device manufacturers are subject to post-market surveillance and periodic, pre-scheduled and unannounced inspections by the FDA or other regulatory authorities, and these inspections may include the manufacturing facilities of our subcontractors.

If any of our product candidates receive marketing authorization in the United States, we, as well as our third-party manufacturers or suppliers that are regulated by the FDA, will also be subject to numerous post-marketing regulatory requirements, which include quality system regulations related to the manufacture of the Vicarious Surgical System, labeling regulations and MDR regulations. The last of these regulations requires us to report to the FDA if any of our commercial devices, when and if authorized for commercialization, causes or contributes to a death or serious injury, or malfunctions in a way that would likely cause or contribute to a death or serious injury if the malfunction recurred. The failure to comply with applicable regulatory requirements can result in enforcement actions by the FDA, which may include any of the following sanctions:

The occurrence of any of these events may have a material adverse effect on our business, financial condition and results of operations.

There is no guarantee that the FDA will grant marketing authorization for the Vicarious Surgical System or any of our future product candidates and technologies, and failure to obtain necessary marketing authorization for the Vicarious Surgical System and our future product candidates and technologies would adversely affect our ability to grow our business.

The Vicarious Surgical System and our new or modified product candidates and technologies will require FDA marketing authorization before they may be marketed in the United States. The FDA may refuse our requests for pre-market review of new product candidates and technologies or may not grant marketing authorization for these product candidates and technologies for the indications that are necessary or desirable for successful commercialization. Early-stage review may also result in delays or other issues. For example, the FDA has issued guidance intended to explain the procedures and criteria used in assessing whether pre-market review submissions may be accepted for substantive review. Under the “Refuse to Accept” guidance, the FDA conducts an early review against specific acceptance criteria to notify applicants whether a pre-market submission for a device is administratively complete, and if not, such notification will identify the missing element(s). Applicants are given the opportunity to provide the FDA with any information identified as missing. If the information is not provided within a specified time, the submission will not be accepted for FDA review and will be considered abandoned.

The FDA may delay, limit or deny marketing authorization of a device for many reasons, including:

The FDA may also change its marketing authorization policies, adopt additional regulations or revise existing regulations, or take other actions that may prevent or delay authorization of our product candidates and technologies under development or impact our ability to obtain marketing authorization for modifications to our authorized products in a timely manner. Significant delays in receiving or failure to receive FDA marketing authorization for our new product candidates and technologies would have an adverse effect on our ability to expand our business.

Unsuccessful animal studies, clinical trials or procedures relating to product candidates and technologies under development could have a material adverse effect on our prospects.

The regulatory clearance, authorization, or approval process for new device product candidates, technologies and new indications for existing device product candidates and technologies requires extensive data and procedures, including the development of regulatory and quality standards and, potentially, studies involving animals or human subjects. Based on pre-submission communications with the FDA, we intend to file a De Novo classification request for the Vicarious Surgical System with respect to use in ventral hernia procedures, which would require human clinical studies to ensure that the product candidate is safe and effective. Unfavorable or inconsistent data from future animal studies, clinical trials or other studies conducted by us or third parties, or perceptions regarding such data, could adversely affect our ability to obtain necessary device regulatory authorization and the market’s view of our future prospects.

Failure to successfully complete any required studies in a timely and cost-effective manner could have a material adverse effect on our prospects with respect to the Vicarious Surgical System or other product candidates and technologies. Because animal studies, clinical trials and other types of scientific studies are inherently uncertain, there can be no assurance that these trials or studies will be completed in a timely or cost-effective manner, be suitable to support marketing authorization or result in a commercially viable product. Clinical trials or other studies may experience significant setbacks even if earlier preclinical or animal studies have shown promising results. Furthermore, preliminary results from animal studies or clinical trials may be contradicted by subsequent clinical analysis. Results from animal studies or clinical trials may also not be supported by actual long-term studies or clinical experience. If preliminary study results are later contradicted, or if initial results cannot be supported by actual long-term studies or clinical experience, our business could be adversely affected. Clinical trials also may be suspended or terminated by us, the FDA, the responsible IRB or other regulatory authorities at any time if it is believed that the trial participants face unacceptable health risks. The FDA may disagree with our interpretation of the data from the animal studies or clinical trials, or may find the design, conduct or results of such studies or trials inadequate to demonstrate safety and effectiveness of the product candidate. The FDA may also require additional non-clinical studies or clinical trials for use in ventral hernia procedures or other indications, which could further delay authorization of our product candidates and technologies.

Attracting patients to perform clinical trials and meeting clinical trial objectives can be more costly and time-consuming than expected and could be adversely affected by another health crisis.

In order conduct our clinical trials, we must recruit, screen and enroll eligible patients. Patients may be identified from the investigator’s own clinical practice or hospital or may be referred by another physician. Potential clinical trial participants must provide informed consent before undergoing certain clinical tests that are used to determine patient eligibility based on inclusion/exclusion criteria. As a result, at the time of informed consent, we do not know if a patient will be eligible to participate in the trial, so we will need to screen many more patients than we intend to enroll in order to meet our enrollment criteria. Not all patients who undergo screening will ultimately be eligible for enrollment in our clinical trials. Moreover, some of the enrolled participants may not comply with the requirements of the trial, thereby leading to poor or unusable data, or some may withdraw from the trial, which may compromise the results of the clinical trial.

We may not be able to initiate, continue and/or complete in a timely manner clinical trials if we are unable to locate and enroll a sufficient number of eligible patients within the planned recruitment period to participate in these trials as required by the applicable regulatory authorities in the United States, Europe and any other applicable jurisdictions.

Delays in subject enrollment or failure of trial subjects to continue to participate in a clinical trial may delay commencement or completion of the clinical trial, cause an increase in the costs of the clinical trial and delays, or result in the failure of the clinical trial. The trial enrollment process may be affected by many factors including:

Any difficulties in enrolling a sufficient number of subjects for any of our clinical trials, or any subjects withdrawing from the clinical trials or not complying with the trial protocols, could result in significant delays and could require us to abandon one or more clinical trials altogether. If our trial sites are restricted or delayed in performing the required procedures or following up with their trial subjects, this may lead to missing information and may potentially impact clinical trial data quality and integrity. Enrollment delays and other issues with our clinical trials may result in increased research and development costs that may exceed the resources available to us and may lead to delays in obtaining marketing authorization in target markets.

If allowed to proceed with our clinical development programs, we intend to conduct clinical trials for certain of our product candidates at sites outside of the United States, and the U.S. regulatory agencies may not accept data from trials conducted in such locations.

The acceptance of data from clinical trials conducted outside the United States by the FDA may be subject to certain conditions or may not be accepted at all, and other comparable non-U.S. regulatory authorities may have similar restrictions and conditions with respect to clinical trials conducted outside of their respective jurisdictions.. In cases where data from clinical trials conducted wholly outside of the United States are intended to serve as the basis for marketing approval in the United States, the FDA will generally not accept such foreign trial data unless (i) the data are determined to be applicable to the U.S. population and U.S. medical practice; (ii) the trials were performed by clinical investigators of recognized competence and pursuant to GCP regulations; and (iii) the FDA is able to validate the data through an onsite inspection, if necessary. Additionally, the FDA’s clinical trial requirements, including sufficient size of patient populations and statistical powering, must be met. Many comparable non-U.S. regulatory authorities have similar approval requirements.

In addition, while these clinical trials are subject to the applicable local laws, the FDA acceptance of the data will be dependent upon its determination that the trials also complied with all applicable U.S. laws and regulations. There can be no assurance that the FDA will accept data from trials conducted outside of the U.S. If the FDA does not accept the data from any of our clinical trials that we determine to conduct outside the U.S., it would likely result in the need for additional trials that would be costly and time-consuming and delay or permanently halt the development of our product candidate.

In addition, the conduct of clinical trials outside the U.S. could have a significant impact on us. Risks inherent in conducting international clinical trials include:

We may rely on third parties to perform clinical trial planning, provide critical advice, conduct our clinical trials and facilitate obtaining regulatory approvals or clearances for our product candidates. Such third parties may not perform satisfactorily, including failing to meet deadlines for the completion of clinical trials.

We may rely on third parties to provide clinical trial planning, conduct certain clinical trials, perform data collection and analysis and provide marketing, manufacturing, regulatory advice and other services that are crucial to our business. We may be unable to find suitable partners, external consultants or service providers to provide such services or such arrangements may not be available on commercially reasonable terms. Further, we may engage third parties that may cease to be able to provide these services or may not provide these services in a timely or professional manner. In particular, our technology and product development activities or clinical trials conducted in reliance on third parties may be delayed, suspended, or terminated if the third parties do not devote a sufficient amount of time or effort to our activities or otherwise fail to successfully carry out their contractual duties or to meet regulatory obligations or expected deadlines; if we replace a third party; if the quality or accuracy of the data obtained by third parties is compromised due to their failure to adhere to clinical protocols, regulatory requirements, or for other reasons including the loss of data; or if the third party becomes bankrupt or enters into liquidation.

We may not always have the ability to control the performance of third parties in their conduct of their activities. If these third parties do not successfully carry out their contractual duties or regulatory obligations or meet expected deadlines, or agreements with such third parties are terminated for any reason, we would be required to find a replacement third party to conduct the required activities. We may be unable to enter into a new agreement with another third party on commercially acceptable terms, if at all. Furthermore, if the quality or accuracy of the data obtained by the third party is compromised, or if data are otherwise lost, we would be required to repeat the affected trial. Third-party performance failures may therefore increase our development costs, delay our ability to obtain regulatory authorization, and delay or prevent the commercialization of our products in target markets. In addition, our third-party agreements usually contain a clause limiting such third party’s liability, such that we may not be able to obtain full compensation for any losses that we may incur in connection with the third party’s performance failures.

Our reliance on these third parties for research and development activities will reduce our control over these activities but will not relieve us of our responsibilities. For example, we will remain responsible for ensuring that each of our clinical trials is conducted in accordance with the general investigational plan and protocols for the trial. Moreover, the FDA and other regulatory authorities require us to comply with good clinical practice regulations and international standards relating to the conduct, recording and reporting the results of clinical trials to assure that data and reported results are credible and accurate and that the rights, integrity and confidentiality of trial participants are protected. Our reliance on third parties, over which we have limited control, to manage those operations does not relieve us of these responsibilities and requirements. Our failure or any failure by these third parties to comply with these regulations or to recruit a sufficient number of patients may require us to repeat clinical trials, which would delay the marketing authorization process. Moreover, our business may be implicated if any of these third parties violates federal or state fraud and abuse or false claims laws and regulations or healthcare privacy and security laws. We also are required to register ongoing clinical trials and post the results of certain completed clinical trials on certain government-sponsored databases, such as clinicaltrials.gov in the United States, within specified timeframes. Failure to do so can result in fines, adverse publicity and civil and criminal sanctions.

Furthermore, these third parties may also have relationships with other entities, some of which may be our competitors. If these third parties do not successfully carry out their contractual duties for any reason, meet expected deadlines or conduct our clinical trials in accordance with regulatory requirements or our stated protocols, we will not be able to obtain, or may be delayed in obtaining, regulatory authorizations for our product candidates and will not be able to, or may be delayed in our efforts to, successfully commercialize our product candidates.

If we are unable to establish such arrangements when, and as necessary, we could be required to undertake these activities at our own expense, which would significantly increase capital requirements and may delay the development, approval and future commercialization of our product candidates, which could have a material adverse effect on our business, financial condition and operating results.

The FDA may propose new legislation, or Congress may propose new legislation, to enhance and modernize the agency’s regulatory approach to device products and technologies, which may significantly affect product development costs, requirements, and other factors and additional uncertainty for our product candidates, technologies and business.

Regulatory requirements may change in the future in a way that adversely affects us. Any change in the laws or regulations that govern pre-market authorization processes or the post-market compliance requirements relating to our current and future product candidates could make it more difficult and costly to obtain marketing authorization for new product candidates, or to produce, market and distribute existing product candidates that receive such authorization.

For example, the FDA and other government agencies have been focusing on the cybersecurity risks associated with certain medical devices and encouraging device manufacturers to take a more proactive approach to assessing the cybersecurity risks of their devices both during development and on a periodic basis after the devices are in commercial distribution. These regulatory efforts could lead to new FDA requirements in the future or additional product liability or other litigation risks if the Vicarious Surgical System is considered to be susceptible to third-party tampering.

More recently, in December 2022, Congress enacted the Consolidated Appropriations Act for 2023, an omnibus appropriations bill, which included amendments to the FDCA under FDORA. The legislation included new requirements for cyber devices, defined as any medical device that is or includes software that is validated, installed, or authorized by the manufacturer; can connect to the internet; and may be vulnerable to cybersecurity threats. Under the FDORA amendments to the FDCA, any application for marketing authorization of the cyber device must include a software bill of materials and a cybersecurity plan describing the methods by which the manufacturer will monitor, identify and address cybersecurity vulnerabilities. Any failure by a cyber device manufacturer to comply with applicable cybersecurity requirements is considered a violation of the FDCA and will subject the manufacturer to enforcement actions and possibly legal sanctions.

In addition, changes in the FDA’s marketing authorization pathways for medical devices could make authorization more difficult to obtain, increase delay, add uncertainty and have other significant adverse effects on our ability to obtain and maintain authorization for our product candidates.

Future legislative and regulatory proposals may prevent, limit or delay regulatory authorization of our product candidates or, more broadly, may materially impact the ability of the FDA and other regulatory agencies to operate as they have historically operated. We cannot be sure whether additional legislative changes will be enacted, or whether any of the FDA’s regulations, guidances or interpretations will be changed, or what the impact of such changes on the agency and its scientific review staff, if any, may be. For example, the next FDA user fee reauthorization package is expected to enter stakeholder negotiations beginning in mid-2025, with any agreement sent to Congress in early 2027 for purposes of initiating the legislative process. Reauthorization of the prescription drug user fee program would need to be finalized by Congress by the end of September 2027 in order to avoid a disruption in FDA’s review goals for 510(k), De Novo classification and PMA submissions, as well as other activities supported by user fees assessed against industry. If we are slow or unable to adapt to changes in existing requirements or the adoption of new requirements or policies, or if we are not able to maintain regulatory compliance, we may lose any marketing authorization that we otherwise may have obtained, and we may not achieve or sustain profitability, which would adversely affect our business, prospects, financial condition and results of operations.

If we fail to obtain regulatory authorizations in other countries for existing or future product candidates, we will not be able to commercialize these product candidates and technologies in those countries.

In order for us to market the Vicarious Surgical System in countries outside of the United States, we must comply with extensive safety and quality regulations in other countries regarding the quality, safety and efficacy of the Vicarious Surgical System. These regulations, such as the requirements for obtaining marketing authorization, including CE mark grant in the European Union, as well as regulatory authorization in the Asia-Pacific region and the time required for regulatory review, vary from country to country. Failure to obtain marketing authorization in any foreign country in which we plan to market the Vicarious Surgical System may harm our ability to generate revenue and harm our business. Marketing authorization requirements and processes vary between countries and can involve additional product testing and additional administrative review periods. The time required to obtain marketing authorization in other countries might differ from that required to obtain FDA authorization. The pre-market review and authorization process in other countries may include all of the risks detailed above regarding FDA clearance, authorization, and approval in the United States, as well as other potential risks relating to delays, refusals, or uncertainties in the application preparation, submission, and review procedures specific to the regulatory processes in such countries. Regulatory authorization of a product in one country does not ensure regulatory authorization in another, but a failure or delay in obtaining marketing authorization in one country may negatively impact the regulatory process in others. Failure to obtain regulatory authorization in other countries or any delay or setback in obtaining such authorization could have the same adverse effects described above regarding FDA authorization in the United States.

If we, our contract manufacturers or our component suppliers are unable to manufacture the Vicarious Surgical System in sufficient quantities, on a timely basis, at acceptable costs and in compliance with regulatory and quality requirements, the manufacturing and distribution of our devices could be interrupted, and our product sales and operating results could suffer.

We and our contract manufacturers and our component suppliers are required to comply with the FDA Quality System Regulation (“QSR”), which is a complex regulatory framework that covers the procedures and documentation of the design, testing, production, control, quality assurance, labeling, packaging, sterilization, storage, distribution and servicing of our devices. We are required to implement an adequate, compliant quality system at our manufacturing facilities and verify that our suppliers maintain facilities, procedures and operations that comply with our quality standards and applicable regulatory requirements. If we obtain marketing authorization for any of our product candidates, we and our contract manufacturers and regulated component suppliers will be subject to periodic unannounced inspections by the FDA and other regulatory authorities to monitor and ensure compliance with post-market regulatory requirements. We cannot assure investors that the FDA or other regulatory authorities will not discover evidence of noncompliance at our facilities or the facilities of our third-party manufacturers or suppliers during a future quality system inspection.

Accordingly, assuming we receive marketing authorization for one or more product candidates, we and our contract manufacturers will continue to expend time, money and effort in all areas of regulatory compliance, including manufacturing, production, product surveillance, and quality control. Failure of us or our third-party manufacturers and component suppliers to adhere to QSR requirements or take adequate and timely corrective action in response to an adverse regulatory inspection finding could delay production of the Vicarious Surgical System and lead to fines, difficulties in obtaining regulatory authorizations, recalls, enforcement actions, including injunctive relief or consent decrees, or other consequences, which could have a material adverse effect on our financial condition or results of operations. Any such failure, including the failure of our contract manufacturers, to achieve and maintain the required high manufacturing standards could result in delays or failures in product testing or delivery, cost overruns, increased warranty costs or other problems that could harm our business and prospects.

Our current or future product candidates, products and technologies may be subject to product recalls even after receiving marketing authorization from the FDA. A recall of the Vicarious Surgical System, either voluntarily or at the direction of the FDA, or the discovery of serious safety issues with our future products, could have a significant adverse impact on us.

The FDA and similar governmental bodies in other countries have the authority to require the recall of the Vicarious Surgical System and any accessory devices if we or our third-party manufacturers fail to comply with relevant regulations pertaining to, among other things, manufacturing practices, labeling or if new information is obtained concerning deficiencies in the safety or efficacy of the Vicarious Surgical System. For example, under the FDA’s MDR regulations, if and when the Vicarious Surgical System receives marketing authorization, we are required to report to the FDA any incident in which the system may have caused or contributed to a death or serious injury or in which the Vicarious Surgical System malfunctioned in a manner likely to cause or contribute to death or serious injury if that malfunction were to recur. Repeated incidents of the same or similar adverse events or product malfunctions may result in a voluntary or mandatory product recall, or administrative or judicial seizure or injunction, when warranted. A government-mandated recall may be ordered if the FDA finds that there is a reasonable probability that the device would cause serious, adverse health consequences or death. A voluntary recall by us could occur as a result of a discovery of any material deficiency in a device, such as manufacturing defects, labeling deficiencies, packaging defects or other failures to comply with applicable regulations. It is possible that the FDA could disagree with our initial classification for a voluntary recall. The FDA requires that reports of device corrections or removals intended to reduce a risk to health posed by the device or remedy a violation of the FDCA caused by the device be submitted to the FDA within 10 working days after the correction or removal is initiated. If a change to a device addresses a violation of the FDCA, that change would generally constitute a medical device recall and require submission of a recall report to the FDA.

Recalls of the Vicarious Surgical System would divert managerial and financial resources and have an adverse effect on our reputation, results of operations and financial condition, which could impair our ability to produce the Vicarious Surgical System in a cost-effective and timely manner in order to meet our customers’ demands. We may also be subject to product liability claims, be required to bear other costs, or be required to take other actions that may have a negative impact on our future sales and our ability to generate profits. Companies are required to maintain certain records of product withdrawals or removals, even if they are not reportable to the FDA. We may initiate voluntary field actions involving the Vicarious Surgical System in the future that we determine do not require notification to the FDA. If the FDA disagrees with our determinations, the FDA could require us to report those actions as recalls. A future recall, withdrawal, or seizure of any product could materially and adversely affect consumer confidence in our brand, lead to decreased demand for the Vicarious Surgical System and negatively affect our sales. In addition, the FDA could take enforcement action for failing to report recalls when they were conducted by us or one of our agents.

We may be subject to enforcement action if we engage in improper or off-label marketing or promotion of the Vicarious Surgical System, including fines, penalties and injunctions.

The FDA regulates the promotional labeling for our products to ensure that the claims we make are consistent with the relevant marketing authorizations, that there is scientific data to substantiate the claims and that our promotion and advertising is neither false nor misleading. The off-label marketing or false or misleading labeling of our products may harm our image in the marketplace, result in injuries that lead to product liability suits, which could be costly to our business, or result in costly investigations and sanctions from the FDA and other regulatory bodies if we are deemed to have engaged in off-label promotion or false or misleading labeling. In addition to the FDA, depending on the form of marketing authorization that the Vicarious Surgical System and future product candidates and technologies receive, the FTC may have overlapping authority to oversee the advertising of our products and any related services offered by us. The FTC’s focus would be on ensuring such advertising is truthful, adequately substantiated, and not deceptive under the FTC Act rather than enforcing any of the regulatory requirements in the FDCA and FDA’s implementing regulations.

In August 2021, the FDA issued a final rule revising its regulation governing the types of evidence relevant to determining the “intended use” of a drug or device under the FDCA. The final rule makes clear that intended use is based on the manufacturer’s “objective intent” and the manufacturer’s knowledge of off-label use does not change a device’s intended use.

We are subject to federal, state and foreign laws prohibiting “kickbacks” and false or fraudulent claims, and other fraud and abuse laws, transparency laws, and other health-care laws and regulations, which, if violated, could subject us to substantial penalties. Additionally, any challenge to or investigation into our practices under these laws could cause adverse publicity and be costly to respond to, and thus could harm our business.

If we obtain FDA marketing authorization for our Vicarious Surgical System, we will be subject to broadly applicable fraud and abuse and other health-care laws and regulations that may constrain the business or financial arrangements and relationships through which we market, sell and distribute the device system and any authorized accessories. Restrictions under applicable federal and state health-care laws and regulations include the following:

Efforts to ensure that our business arrangements with third parties comply with applicable health-care laws and regulations will involve substantial costs. It is possible that governmental authorities will conclude that our business practices may not comply with current or future statutes, regulations or case law involving applicable fraud and abuse or other health-care laws and regulations. If our operations are found to be in violation of any of these laws or any other governmental regulations that may apply to us, we may be subject to significant civil, criminal and administrative penalties, damages, fines, imprisonment, exclusion of products from government funded health-care programs, such as Medicare and Medicaid, and the curtailment or restructuring of our operations. If any of the physicians or other health-care providers or entities with whom we expect to do business is found to be not in compliance with applicable laws, they may be subject to criminal, civil or administrative sanctions, including exclusions from government funded health-care programs.

Our employees, independent contractors, principal investigators, contract research organizations, consultants or vendors may engage in misconduct or other improper activities, including noncompliance with regulatory standards and requirements.

We are exposed to the risk that our employees, independent contractors, principal investigators, contract research organizations, consultants or vendors may engage in fraudulent or other illegal activity. Misconduct by these parties could include intentional, reckless and/or negligent conduct or disclosure of unauthorized activities to us that violates: FDA regulations, including those laws requiring the reporting of true, complete and accurate information to the FDA; manufacturing standards; federal and state healthcare fraud and abuse laws and regulations; or laws that require the true, complete and accurate reporting of financial information or data. In addition, sales, marketing and business arrangements in the healthcare industry are subject to extensive laws and regulations intended to prevent fraud, kickbacks, self-dealing and other abusive practices. These laws and regulations may restrict or prohibit a wide range of pricing, discounting, marketing and promotion, sales commission, customer incentive programs and other business arrangements. Activities subject to these laws also involve the improper use or misrepresentation of information obtained in the course of clinical trials or creating fraudulent data in our nonclinical studies or clinical trials, which could result in regulatory sanctions and serious harm to our reputation.

It is not always possible to identify and deter misconduct by our employees and other third parties, and the precautions we take to detect and prevent this activity may not be effective in controlling unknown or unmanaged risks or losses or in protecting us from governmental investigations or other actions or lawsuits stemming from a failure to be in compliance with such laws or regulations. Additionally, we are subject to the risk that a person could allege such fraud or other misconduct, even if none occurred. If any such actions are instituted against us, and we are not successful in defending ourselves or asserting our rights, those actions could have a significant impact on our business, including the imposition of civil, criminal and administrative penalties, damages, monetary fines, possible exclusion from participation in Medicare, Medicaid and other federal healthcare programs, contractual damages, reputational harm, diminished potential profits and future earnings, and curtailment of our operations, any of which could adversely affect our business, financial condition, results of operations or prospects.

Health-care policy and payment changes may have a material adverse effect on our financial condition and results of operations.

We cannot predict the likelihood, nature or extent of government regulation that may arise from future legislation or administrative or executive action, either in the United States or abroad. In the United States and in some other jurisdictions, there have been a number of legislative and regulatory changes and proposed changes regarding the health-care system that could prevent or delay marketing authorization of our product candidates and technologies or any of our potential future product candidates and technologies, restrict or regulate post-authorization activities, or affect our ability to profitably sell any product candidates and technologies for which we obtain marketing authorization. Increased scrutiny by the U.S. Congress of the FDA’s medical device authorization process may significantly delay or prevent marketing authorization, as well as subject us to more stringent product labeling and post-marketing testing and other requirements. Congress also must reauthorize the FDA’s user fee programs every five years and often makes changes to those programs, in addition to policy or procedural changes that may be negotiated between the FDA and industry stakeholders as part of this periodic reauthorization process.

Furthermore, there have been and continue to be a number of legislative initiatives in the U.S. Congress and state legislatures to contain healthcare costs. Federal and state lawmakers regularly propose and, at times, enact legislation that would result in significant changes to the healthcare system, some of which are intended to contain or reduce the costs of medical products and services. Future legislative and regulatory proposals to further reform healthcare or reduce healthcare costs may prevent, limit or delay regulatory authorization of our product candidates or coverage or reimbursement for such product candidates, if approved, or even lower reimbursement for the procedures associated with the use of such product candidates. More broadly, such future legislation or regulation may materially impact the ability of the FDA and other regulatory agencies to operate as they have historically operated. The cost containment measures that payors and providers are instituting and the effect of any healthcare reform initiative implemented in the future could impact our revenue from the sale of our products. We cannot be sure whether additional legislative changes will be enacted, or whether any of the FDA’s regulations, guidances or interpretations will be changed, or what the impact of such changes on the agency and its scientific review staff, if any, may be.

The growth of overall healthcare costs as a percentage of gross domestic product in many countries means that governments and payers are under intense pressure to control healthcare spending even more tightly. As a result, our businesses and the healthcare industry in general are operating in an ever more challenging environment with very significant pricing pressures. In recent years, national, federal, provincial, state and local officials and legislators have proposed, or are reportedly considering proposing, a variety of price-based reforms to the healthcare systems in the United States, the European Union and other countries. Some proposals include measures that would limit or eliminate payments for certain medical procedures and treatments or subject pricing to government control. In addition, proposed legislation may limit access to healthcare insurance coverage, which could reduce the volume of medical procedures involving our authorized device products. Furthermore, in certain foreign markets, the pricing or profitability of healthcare products is subject to government controls and other measures that have been prepared by legislators and government officials. While we cannot predict whether any such legislative or regulatory proposals or reforms will be adopted, the adoption of any such proposals or reforms could adversely affect the commercial viability of our existing and potential products. In addition, any changes of, or uncertainty with respect to, coverage or reimbursement rates relating to our authorized products, or procedures involving such products, could affect demand for our products, which in turn could impact our ability to successfully commercialize our authorized products and have a material adverse effect on our business, financial condition and results of operations.

Inadequate funding for the FDA and other government agencies could hinder their ability to hire and retain key leadership and other personnel, prevent new products and technologies from being developed or commercialized in a timely manner or otherwise prevent those agencies from performing normal business functions on which the operation of our business may rely, which could negatively impact our business.

The ability of the FDA to review and approve, authorize, or clear new medical device products and technologies can be affected by a variety of factors, including government budget and funding levels, ability to hire and retain key personnel and accept the payment of user fees, and statutory, regulatory, and policy changes. Average review times at the FDA have fluctuated in recent years as a result. In addition, government funding of the SEC and other government agencies on which our operations may rely, including those that fund research and development activities, is subject to the political process, which is inherently fluid and unpredictable.

Disruptions at the FDA and other agencies may also increase the time necessary for new products and technologies to be reviewed and/or authorized by necessary government agencies, which would adversely affect our business. For example, political disputes in Congress may result in a shutdown of the U.S. government, and in such cases, certain regulatory agencies, such as the FDA and the SEC, would have to furlough critical employees and stop critical activities.

Additionally, if a prolonged government shutdown or slowdown occurs, or if global health concerns prevent the FDA or other regulatory authorities from conducting their regular premarket review, inspections, or other regulatory activities, it could significantly impact the ability of the FDA to timely review and clear, authorize, or approve regulatory submissions, which could have a material adverse effect on our future business. Further, future government shutdowns could impact our ability to access the public markets and obtain necessary capital in order to properly capitalize and continue our operations.

Risks Related to Our Intellectual Property

If we are unable to protect our intellectual property, our ability to maintain any technological or competitive advantage over our competitors and potential competitors would be adversely impacted, and our business may be harmed.

We rely on patent protection as well as trademark, copyright, trade secret and other intellectual property rights protection and contractual restrictions to protect our proprietary technologies, all of which provide limited protection and may not adequately protect our rights or permit us to gain or keep any competitive advantage. If we fail to obtain, maintain, and protect our intellectual property, third parties may be able to compete more effectively against us, and we may lose our technological or competitive advantage. We may also incur substantial litigation costs in our attempts to defend, enforce, recover or restrict the use of our intellectual property.

We cannot assure investors that any of our currently pending or future patent applications will result in granted patents, and we cannot predict how long it will take for such patents to be granted or whether the scope of such patents, if granted, will adequately protect the Vicarious Surgical System from competitors. It is possible that, for any of our patents that have been granted or that may be granted in the future, other parties will design alternatives that do not infringe our patents. Further, we cannot assure investors that other parties will not challenge any patents granted to us or that courts or regulatory agencies will hold our patents to be valid or enforceable. We cannot guarantee investors that we will be successful in defending challenges made against our patents. Any successful third-party challenge to our patents could result in the unenforceability or invalidity of such patents, or to such patents being interpreted narrowly or otherwise in a manner adverse to our interests. Our ability to establish or maintain a technological or competitive advantage over our competitors may be diminished because of these uncertainties. For these and other reasons, our intellectual property may not provide us with any competitive advantage. For example:

The strength of patents involves complex legal questions and can be uncertain. Even if one or more patents do successfully issue, third parties may challenge the validity, enforceability, inventorship or scope thereof. Such a challenge may result in such patents being narrowed, invalidated or held unenforceable. If the breadth or strength of protection provided by our patents is threatened, it could dissuade companies from collaborating with us to develop, and threaten our ability to commercialize, our technology. Further, if we encounter delays in clinical trials, the period of time during which we could market our product candidates under patent protection would be reduced. Since patent applications in the United States and most other countries are confidential for a period of time after filing, we cannot be certain that we are the first to file any patent application related to our product candidates.

Even if our patent applications issue as patents, they may not issue in a form that will provide us with any meaningful protection, prevent competitors from competing with us or otherwise provide us with any competitive advantage. Our competitors may be able to circumvent our patents by developing similar or alternative technologies or products in a non-infringing manner. The issuance of a patent is not conclusive as to its scope, validity or enforceability, and our patents may be challenged in the courts or patent offices in the United States and abroad. For example, we may become involved in opposition, interference, derivation, inter partes review or other proceedings challenging our patent rights, and the outcome of any proceedings are highly uncertain. Such challenges may result in the patent claims of our patents being narrowed, invalidated or held unenforceable, which could limit our ability to stop or prevent us from stopping others from using or commercializing similar or identical technology and products, or limit the duration of the patent protection of our technology and product candidates. Given the amount of time required for the development, testing and regulatory review of new technology, patents protecting such technology might expire before or shortly after such technology is commercialized. As a result, our patent portfolio may not provide us with sufficient rights to exclude others from commercializing products similar or identical to our product candidates or otherwise provide us with a competitive advantage.

To the extent our intellectual property offers inadequate protection, or is found to be invalid or unenforceable, we would be exposed to a greater risk of direct competition. If our intellectual property does not provide adequate coverage over our product candidates and technologies and protection against our competitors’ products and technologies, our competitive position could be adversely affected, as could our business.

The measures that we use to protect the security of our intellectual property and other proprietary rights may not be adequate, which could result in the loss of legal protection for, and thereby diminish the value of, such intellectual property and other rights.

The patenting process is expensive and time-consuming, and we may not be able to file and prosecute all necessary or desirable patent applications at a reasonable cost or in a timely manner. In addition, we may not pursue or obtain patent protection in all relevant markets. It is also possible that we will fail to identify patentable aspects of our research and development output before it is too late to obtain patent protection. Our pending and future patent applications may not result in issued patents that protect our technology or product candidates, in whole or in part. In addition, our existing patents and any future patents we obtain may not be sufficiently broad to prevent others from using our technology or from developing competing products and technologies.

If we delay in filing a patent application, and a competitor files a patent application on the same or a similar technology before we do, we may face a limited ability to secure patent rights. We may not be able to patent the technology at all. Even if we can patent the technology, we may be able to patent only a limited scope of the technology, and the limited scope may be inadequate to protect our product candidates, or to block competitor products that are similar or adjacent to ours. Our earliest patent filings have been published. A competitor may review our published patents and arrive at the same or similar technology advances for our product candidates as we developed. If the competitor files a patent application on such an advance before we do, then we may no longer be able to protect the technology. We may require a license from the competitor, and if the license is not available on commercially-viable terms, then we may not be able to launch our product candidates.

In addition to pursuing patents on our technology, we also rely upon trademarks, trade secrets, copyrights and unfair competition laws and other contractual provisions, to protect our intellectual property and other proprietary rights. Despite these measures, any of our intellectual property rights could be challenged, invalidated, circumvented or misappropriated. In addition, we take steps to protect our intellectual property and proprietary technology by entering into confidentiality agreements and intellectual property assignment agreements with our employees, consultants, corporate partners and, when needed, our advisors. Our suppliers may also have access to the patented technology owned or used by us as well as other proprietary information, and these suppliers are subject to confidentiality provisions under their agreements with us.

Such agreements or provisions may not be enforceable or may not provide meaningful protection for our trade secrets or other proprietary information in the event of unauthorized use or disclosure or other breaches of the agreements, and we may not be able to prevent such unauthorized disclosure. Notwithstanding any such agreements, there is no assurance that our current or former manufacturers or suppliers will not use and/or supply our competitors with our trade secrets, know-how or other proprietary information to which these parties gained access or generated from their relationship with us. This could lead to our competitors gaining access to patented or other proprietary information. Moreover, if a party to an agreement with us has an overlapping or conflicting obligation to a third party, our rights in and to certain intellectual property could be undermined. Monitoring unauthorized disclosure is difficult, and we do not know whether the steps we have taken to prevent such disclosure are, or will be, adequate. If we were to enforce a claim that a third party had illegally obtained and was using our trade secrets, it would be expensive and time-consuming, the outcome would be unpredictable, and any remedy may be inadequate. Courts outside the United States may be less willing to protect trade secrets.

In addition, competitors could purchase our product candidates and technologies and attempt to replicate some or all of the competitive advantages we derive from our development efforts, willfully infringe our intellectual property rights, design around our protected technology or develop their own competitive technologies that fall outside of our intellectual property rights. If our intellectual property does not adequately protect our market share against competitors’ products and technologies and methods, our competitive position could be adversely affected, as could our business.

We may need or may choose to obtain licenses from third parties to advance our research or allow commercialization of our current or future product candidates and technologies, and we cannot provide any assurances that we would be able to obtain such licenses.

We may need or may choose to obtain licenses from third parties to advance our research or allow commercialization of our current or future product candidates and technologies, and we cannot provide any assurances that third-party patents do not exist that might be enforced against our current or future product candidates and technologies in the absence of such a license. We may fail to obtain any of these licenses on commercially reasonable terms, if at all. Even if we are able to obtain a license, it may be non-exclusive, thereby giving our competitors access to the same technologies licensed to us. If we could not obtain a license, we may be required to expend significant time and resources to develop or license replacement technology. If we are unable to do so, we may be unable to develop or commercialize the affected product candidates and technologies, which could materially harm our business and the third parties owning such intellectual property rights could seek either an injunction prohibiting our sales, or, with respect to our sales, an obligation on our part to pay royalties, damages and/or other forms of compensation.

Licensing intellectual property involves complex legal, business and scientific issues. Disputes may arise between us and our licensors regarding intellectual property subject to a license agreement, including:

If disputes over licensed intellectual property prevent or impair our ability to maintain the licensing arrangements on acceptable terms, we may be unable to successfully develop and commercialize the affected product, or the dispute may have an adverse effect on our results of operations.

In addition to agreements pursuant to which we in-license intellectual property, we may in the future grant licenses under our intellectual property. Like in-licenses, out-licenses are complex, and disputes may arise between us and our licensees, such as the types of disputes described above. Moreover, our licensees may breach their obligations, or we may be exposed to liability due to our failure or alleged failure to satisfy our obligations. Any such occurrence could have an adverse effect on our business.

The licensing and acquisition of third-party intellectual property rights is a competitive practice, and companies that may be more established, or have greater resources than we do, may also be pursuing strategies to license or acquire third-party intellectual property rights that we may consider necessary or attractive for commercializing our technology. More established companies may have a competitive advantage over us due to their larger size, cash resources, or commercialization capabilities. There can be no assurance that we will be able to successfully complete such negotiations and ultimately acquire the rights to the intellectual property that we may seek to acquire.

We and our partners may be sued for infringing the intellectual property rights of third parties. If that happens, such litigation would be costly and time consuming, and an unfavorable outcome in any such litigation could have a material adverse effect on our business.

Our success also depends on our ability to develop, manufacture, market and sell the Vicarious Surgical System without infringing the proprietary rights of third parties. Numerous U.S. and foreign-issued patents and pending patent applications owned by third parties exist in the fields in which we are developing the Vicarious Surgical System. As part of a business strategy to impede our successful commercialization and entry into new markets, competitors may claim that the Vicarious Surgical System infringes their intellectual property rights and may suggest that we enter into license agreements. Such competitors may bring litigation against us or our partners to enforce such claims.

Such claims may or may not be meritorious, but even if such claims are without merit, we could incur substantial costs and the attention of our management and technical personnel could be diverted in defending us against or settling such claims. Any adverse ruling by a court or administrative body, or perception of an adverse ruling, may have a material adverse effect on our ability to conduct our business and on our finances. Moreover, third parties making claims against us may be able to obtain injunctive relief against us, which could block our ability to offer the Vicarious Surgical System and could result in a substantial award of damages against us. In addition, since we could sometimes agree to indemnify customers, collaborators or licensees, we may have additional liability in connection with any infringement or alleged infringement of third-party intellectual property. Because patent applications can take many years to issue, there may be pending applications, some of which are unknown to us, that may result in issued patents that the Vicarious Surgical System or proprietary technologies infringe. Moreover, we may fail to identify issued patents of relevance or incorrectly conclude that an issued patent is invalid or not infringed by our technology or the Vicarious Surgical System. There is a substantial amount of litigation involving patent and other intellectual property rights in the medical device space in general and in the robotic surgery field in particular. As we face increasing competition and as our business grows, we will likely face claims of infringement. If a third-party claims that we or any of our licensors, customers or collaboration partners infringe a third party’s intellectual property rights, we may have to do any or all of the following:

Some of our competitors may be able to sustain the costs of complex patent litigation more effectively than we can, because they have substantially greater resources. In addition, any uncertainties resulting from the initiation and continuation of any litigation could have a material adverse effect on our ability to raise the funds necessary to continue our operations or could otherwise have a material adverse effect on our business, results of operations, financial condition and prospects.

We may choose to challenge the patentability of claims in a third party’s U.S. patent by requesting that the USPTO review the patent claims in an ex-parte re-exam, inter partes review or post-grant review proceedings. These proceedings are expensive and may consume time or other resources. We may choose to challenge a third party’s patent in patent opposition proceedings in the European Patent Office, or EPO, or other foreign patent office. The costs of these opposition proceedings could be substantial, and may consume time or other resources. If we fail to obtain a favorable result at the USPTO, EPO or other patent office, then we may be exposed to litigation by a third party alleging that the patent is infringed by our product candidates or proprietary technologies.

During the course of any intellectual property litigation, there could be public announcements of the initiation of the litigation, as well as results of hearings, rulings on motions and other interim proceedings in the litigation. If securities analysts or investors regard these announcements as negative, the perceived value of our product candidates, programs or intellectual property could be diminished. Accordingly, the market price of shares of our common stock may decline. Such announcements could also harm our reputation or the market for our future product candidates, which could have a material adverse effect on our business.

We may be involved in lawsuits to protect or enforce our patents or the patents of our licensors, which could be expensive, time-consuming and unsuccessful.

Competitors may infringe our patents or the patents that we license. In the event of infringement or unauthorized use, we may file one or more infringement lawsuits, which can be expensive and time-consuming. An adverse result in any such litigation proceedings could put one or more of our patents at risk of being invalidated, being found to be unenforceable or being interpreted narrowly and could put our patent applications at risk of not issuing. An adverse result could also require us to pay the legal fees of the opposing party. Furthermore, because of the substantial amount of discovery required in connection with intellectual property litigation, there is a risk that some of our confidential information could be compromised by disclosure during this type of litigation.

Many of our competitors are larger than us and have substantially greater resources. They are, therefore, likely to be able to sustain the costs of complex patent litigation longer than we could. In addition, the uncertainties associated with litigation could have a material adverse effect on our ability to raise any funds necessary to continue our operations, continue our internal research programs, in-license needed technology, or enter into development partnerships that would help us bring the Vicarious Surgical System to market.

In addition, patent litigation can be very costly and time-consuming. An adverse outcome in any such litigation or proceedings may expose us or any of our future development partners to loss of our proprietary position, expose us to significant liabilities, or require us to seek licenses that may not be available on commercially acceptable terms, if at all.

If a defendant were to prevail on a legal assertion of invalidity and/or unenforceability, we would lose at least part, and perhaps all, of the patent protection on the technology or process claimed by the patent. In addition, if the breadth or strength of protection provided by our patents or those of our future licensors is threatened, it could dissuade other companies from collaborating with us to license, develop or commercialize current or future product candidates. Such a loss of patent protection could have a material adverse effect on our business.

We may be required to protect our patents through procedures created to attack the validity of a patent at the USPTO. The USPTO hears post-grant proceedings, including post-grant reviews (PGRs), inter partes reviews (IPRs) and derivation proceedings. An adverse determination in any such submission or proceeding could reduce the scope or enforceability of, or invalidate, our patent rights, which could adversely affect our competitive position. Because of a lower evidentiary standard in USPTO proceedings compared to the evidentiary standard in United States federal courts necessary to invalidate a patent claim, a third party could potentially provide evidence in a USPTO proceeding sufficient for the USPTO to hold a claim invalid even though the same evidence would be insufficient to invalidate the claim if first presented in a district court action. Accordingly, a third party may attempt to use the USPTO procedures to invalidate our patent claims that would not have been invalidated if first challenged by the third party as a defendant in a district court action. Thus, the America Invents Act (the “AIA”) and its implementation could increase the uncertainties and costs surrounding the prosecution of our patent applications and the enforcement or defense of our issued patents, all of which could have a material adverse effect on our business, financial condition, results of operations and prospects.

Our issued patents could be found invalid or unenforceable if challenged in court, which could have a material adverse effect on our business.

Any of our intellectual property rights could be challenged or invalidated despite measures we take to obtain patent and other intellectual property protection with respect to our product candidates and proprietary technology. For example, if we or any of our partners were to initiate legal proceedings against a third party to enforce a patent covering the Vicarious Surgical System, the defendant in such litigation could counterclaim that our patent is invalid and/or unenforceable. In patent litigation in the United States, defendant counterclaims alleging invalidity and/or unenforceability are commonplace. Grounds for a validity challenge could be an alleged failure to meet any of several statutory requirements, including lack of novelty, obviousness or non-enablement, or failure to claim patent eligible subject matter. Grounds for an unenforceability assertion could be an allegation that someone connected with the prosecution of the patent withheld relevant information from the USPTO, or made a misleading statement during prosecution either in the U.S. or abroad. Third parties may also raise similar claims before the USPTO or foreign patent offices, even outside the context of litigation. The outcome following legal assertions of invalidity and unenforceability is unpredictable. With respect to the validity question, for example, we cannot be certain that there is no invalidating prior art of which we and the patent examiner were unaware or was otherwise not considered during prosecution. If a defendant were to prevail on a legal assertion of invalidity and/or unenforceability, we would lose at least part, and perhaps all, of the challenged patent. Such a loss of patent protection could have a material adverse effect on our business.

We may be subject to claims that our employees, consultants or independent contractors have wrongfully used or disclosed alleged trade secrets of their other clients or former employers to us, which could subject us to costly litigation.

As is common in the medical device industry, we engage the services of consultants and independent contractors to assist us in the development of the Vicarious Surgical System. Many of these consultants and independent contractors were previously employed at, or may have previously provided or may be currently providing consulting or other services to, universities or other technology or medical device companies, including our competitors or potential competitors. We may become subject to claims that we, a consultant or an independent contractor, inadvertently or otherwise, used or disclosed trade secrets or other information proprietary to their former employers or their former or current clients. We may similarly be subject to claims stemming from similar actions of an employee, such as one who was previously employed by another company, including a competitor or potential competitor. Litigation may be necessary to defend against these claims. Even if we are successful in defending against these claims, litigation could result in substantial costs and be a distraction to our management team. If we were not successful, we could lose access or exclusive access to valuable intellectual property.

In addition, there could be public announcements of the results of hearings, motions or other interim proceedings or developments, and, if securities analysts or investors perceive these results to be negative, it could have a substantial adverse effect on the price of our common stock. This type of litigation or proceeding could substantially increase our operating losses and reduce our resources available for development activities. We may not have sufficient financial or other resources to adequately conduct such litigation or proceedings. Some of our competitors may be able to sustain the costs of such litigation or proceedings more effectively than we can because of their substantially greater financial resources. Uncertainties resulting from the initiation and continuation of patent litigation or other intellectual property related proceedings could adversely affect our ability to compete in the marketplace.

We may be subject to claims challenging the inventorship or ownership of our patents and other intellectual property.

We generally enter into confidentiality and intellectual property assignment agreements with our employees, consultants, and contractors. These agreements generally provide that inventions conceived by the party in the course of rendering services to us will be our exclusive property. However, those agreements may not be honored and may not effectively assign intellectual property rights to us. For example, even if we have a consulting agreement in place with an academic advisor pursuant to which such academic advisor is required to assign any inventions developed in connection with providing services to us, such academic advisor may not have the right to assign such inventions to us, as it may conflict with his or her obligations to assign all such intellectual property to his or her employing institution.

We may be subject to claims that former employees, collaborators or other third parties have an interest in our patents, trade secrets, or other intellectual property as an inventor or co-inventor. Also, former employees may become employed by competitors who develop similar technology, and could assist the competitor in designing around our patents. While it is our policy to require our employees and contractors who may be involved in the development of intellectual property to execute agreements assigning such intellectual property to us, we may be unsuccessful in executing such an agreement with each party who in fact develops intellectual property that we regard as our own. The assignment agreements entered into by us may not be self-executing or may be breached, and litigation may be necessary to defend against these and other claims challenging inventorship or our ownership of our patents, trade secrets or other intellectual property. If we fail in defending any such claims, in addition to paying monetary damages, we may lose valuable intellectual property rights, such as exclusive ownership of, or right to use, intellectual property that is important to our product candidates. Even if we are successful in defending against such claims, litigation could result in substantial costs and be a distraction to management and other employees. Any of the foregoing could have a material adverse effect on our business, financial condition, results of operations and prospects.

We may not be able to protect our intellectual property rights throughout the world, which could materially, negatively affect our business.

Filing, prosecuting and defending patents on current and future product candidates and technologies in all countries throughout the world would be prohibitively expensive, and many markets outside the United States will likely be smaller than the United States for commercializing the Vicarious Surgical System. We may therefore choose to pursue a more limited set of patent filings outside the United States, such that our intellectual property rights in some countries outside the United States may be less extensive than those in the United States, or may not be pursued at all in such countries. In addition, the laws of some foreign countries do not protect intellectual property rights to the same extent as federal and state laws in the United States. Consequently, regardless of whether we are able to prevent third parties from practicing our inventions in the United States, we may not be able to prevent third parties from practicing our inventions in all countries outside the United States, or from selling or importing products and technologies made using our inventions in and into the United States or other jurisdictions. Competitors may use our technologies in jurisdictions where we have not pursued and obtained patent protection to develop their own product candidates and technologies, and further, may export otherwise infringing products and technologies to territories where we have patent protection, but enforcement is not as strong as it is in the United States. These products and technologies may compete with our product candidates and technologies, and our patents or other intellectual property rights may not be effective or sufficient to prevent them from competing. Even if we pursue and obtain issued patents in particular jurisdictions, our patent claims or other intellectual property rights may not be effective or sufficient to prevent third parties from competing in such jurisdictions. Patent protection must ultimately be sought on a country-by-country basis, which is an expensive and time-consuming process with uncertain outcomes. Accordingly, we may choose not to seek patent protection in certain countries, and we will not have the benefit of patent protection in such countries.

Many companies have encountered significant problems in protecting and defending intellectual property rights in foreign jurisdictions. The legal systems of certain countries, particularly certain developing countries, do not favor the enforcement of patents and other intellectual property protection, which could make it difficult for us to stop the infringement of our patents or marketing of competing products and technologies in violation of our proprietary rights generally. Proceedings to enforce our patent rights in foreign jurisdictions could result in substantial costs and divert our efforts and attention from other aspects of our business. These proceedings could put our patents at risk of being invalidated or interpreted narrowly and our patent applications at risk of not issuing. Additionally, these proceedings could provoke third parties to assert claims against us. We may not prevail in any lawsuits that we initiate and the damages or other remedies awarded, if any, may not be commercially meaningful. Accordingly, our efforts to enforce our intellectual property rights around the world may be inadequate to obtain a significant commercial advantage from the intellectual property that we develop or license and may adversely impact our business.

In addition, we also face the risk that the Vicarious Surgical System will be imported or reimported into markets with relatively higher prices from markets with relatively lower prices, which would result in a decrease of sales and any payments we receive from the affected market. Recent developments in U.S. patent law have made it more difficult to stop these and related practices based on theories of patent infringement.

Patent terms may be inadequate to protect our competitive position on technology for an adequate amount of time.

Patents have a limited lifespan. In the United States, if all maintenance fees are timely paid, the natural expiration of a patent is generally 20 years from its earliest U.S. non-provisional filing date. Various extensions may be available, but the life of a patent, and the protection it affords, is limited. Even if patents covering our product candidates are obtained, once the patent life has expired for a product, we may be open to competition. Given the amount of time required for the development, testing and regulatory review of new products, patents protecting such products might expire before or shortly after such products are commercialized. As a result, our patent portfolio may not provide us with sufficient rights to exclude others from commercializing products similar or identical to our product candidates for a meaningful amount of time, or at all.

Obtaining and maintaining our patent protection depends on compliance with various procedural, document submission, fee payment and other requirements imposed by governmental patent agencies, and our patent protection could be reduced or eliminated for non-compliance with these requirements.

The USPTO and various foreign governmental patent agencies require compliance with a number of procedural, documentary, fee payment and other provisions during the patent process. There are situations in which noncompliance can result in abandonment or lapse of a patent or patent application, resulting in partial or complete loss of patent rights in the relevant jurisdiction. In such an event, competitors might be able to enter the market earlier than would otherwise have been the case.

Periodic maintenance fees on any issued patent are due to be paid to the USPTO and foreign patent agencies in several stages over the lifetime of the patent. The USPTO and various foreign governmental patent agencies also require compliance with a number of procedural, documentary, fee payment (such as annuities) and other similar provisions during the patent application process and beyond. While an inadvertent lapse can in many cases be cured by payment of a late fee or by other means in accordance with the applicable rules, there are situations in which noncompliance can result in abandonment or lapse of the patent or patent application, resulting in partial or complete loss of patent rights in the relevant jurisdiction. Non-compliance events that could result in abandonment or lapse of a patent or patent application include, but are not limited to, failure to respond to official actions within prescribed time limits, non-payment of fees and failure to properly legalize and submit formal documents. In some cases, our licensors may be responsible for these payments or filings, thereby decreasing our control over compliance with these requirements.

If we fail to comply with such procedural, documentary, payment and other provisions for any item of intellectual property, such intellectual property may become abandoned or may lapse.

If our trademarks and trade names are not adequately protected, then we may not be able to build name recognition in our markets of interest and our business may be adversely affected.

Our registered or unregistered trademarks or trade names may be challenged, infringed, circumvented or declared generic or determined to be infringing on other marks. We may not be able to protect our rights to these trademarks and trade names, which we need to build name recognition by potential partners or customers in our markets of interest. At times, competitors may adopt trade names or trademarks similar to ours, thereby impeding our ability to build brand identity and possibly leading to market confusion. In addition, there could be potential trade name or trademark infringement claims brought by owners of other registered trademarks. Over the long term, if we are unable to establish name recognition based on our trademarks and trade names, then we may not be able to compete effectively and our business may be adversely affected.

In addition, if we are unable to establish name recognition based on our trademarks and trade names, then we may not be able to compete effectively and our business may be adversely affected. We may license our trademarks and trade names to third parties, such as distributors. Though these license agreements may provide guidelines for how our trademarks and trade names may be used, a breach of these agreements or misuse of our trademarks and tradenames by our licensees may jeopardize our rights in, or diminish the goodwill associated with, our trademarks and trade names. Our efforts to enforce or protect our proprietary rights related to trademarks, trade names, trade secrets, domain names, copyrights or other intellectual property may be ineffective and could result in substantial costs and diversion of resources and could adversely affect our financial condition or results of operations.

Numerous factors may limit any potential competitive advantage provided by our intellectual property rights.

The degree of future protection afforded by our intellectual property rights is uncertain because intellectual property rights have limitations, and may not adequately protect our business, provide a barrier to entry against our competitors or potential competitors, or permit us to maintain our competitive advantage. Moreover, if a third party has intellectual property rights that cover the practice of our technology, we may not be able to fully exercise or extract value from our intellectual property rights. The following examples are illustrative:

Should any of these events occur, they could significantly harm our business and results of operations.

Litigation Risks

We face the risk of product liability claims and may be subject to damages, fines, penalties and injunctions, among other things.

Our business exposes us to the risk of product liability claims that are inherent in the testing, manufacturing and marketing of medical devices, including those which may arise from the misuse (including system hacking or other unauthorized access by third parties to our systems) or malfunction of, or design flaws in, our product candidates, when or if authorized for marketing. This liability may vary based on the FDA classification associated with our devices and with state law governing product liability standards applied to specification developers and/or manufacturers in a given negligence or strict liability lawsuit. We may be subject to product liability claims if the Vicarious Surgical System causes, or merely appears to have caused, an injury. Claims may be made by patients, healthcare providers or others selling the Vicarious Surgical System. The risk of product liability claims may also increase if our product candidates are subject to a recall or seizure. Product liability claims may be brought by individuals or by groups seeking to represent a class.

Although we have insurance at levels that we believe to be appropriate, this insurance is subject to deductibles and coverage limitations. Our current product liability insurance may not continue to be available to us on acceptable terms, if at all, and, if available, the coverage may not be adequate to protect us against any future product liability claims. If we are unable to maintain insurance at an acceptable cost or on acceptable terms with adequate coverage or otherwise protect against potential product liability claims, we may be exposed to significant liabilities, which may harm our business. A product liability claim, recall or other claim with respect to uninsured liabilities or for amounts in excess of insured liabilities could result in significant costs and significant harm to our business.

We may be subject to claims against us even if the apparent injury is due to the actions of others or misuse of the device or a partner device. Healthcare providers may use the Vicarious Surgical System in a manner inconsistent with the labeling and that differs from the manner in which it was used in clinical studies and authorization for use by the FDA. Off-label use of medical products by healthcare providers is common, and any such off-label use of the Vicarious Surgical System could subject us to additional liability, or require design changes to limit this potential off-label use once discovered. Defending a suit, regardless of merit, could be costly, could divert management attention and might result in adverse publicity, which could result in the withdrawal of, or result in reduced acceptance of, the Vicarious Surgical System in the market.

Additionally, we may enter into various agreements where we indemnify third parties for certain claims relating to the Vicarious Surgical System. These indemnification obligations may require us to pay significant sums of money for claims that are covered by these indemnification obligations. We are not currently subject to any product liability claims; however, any future product liability claims against it, regardless of their merit, may result in negative publicity about us that could ultimately harm our reputation and could have a material adverse effect on our business, financial condition, or results of operations.

We may face litigation and other risks as a result of the material weakness in our internal controls over financial reporting.

We have previously identified a material weakness in our internal controls over financial reporting. See “We have identified a material weakness in our internal control over financial reporting. If we are unable to successfully remediate this material weakness in our internal control over financial reporting, we may not be able to report our financial condition or results of operations accurately or in a timely manner, which may adversely affect investor confidence in us and, as a result, materially and adversely affect our business and the value of our Class A common stock.”

As a result of such material weakness, we face potential for litigation or other disputes which may include, among others, claims invoking the federal and state securities laws, contractual claims or other claims arising from the Restatement and material weaknesses in our internal control over financial reporting and the preparation of our financial statements. We can provide no assurance that such litigation or dispute will not arise in the future. Any such litigation or dispute, whether successful or not, could have a material adverse effect on our business, results of operations and financial condition.

Risks Related to Our Securities and to Being a Public Company

Our outstanding warrants increase the number of shares eligible for future resale in the public market and, if exercised, will result in significant dilution to our stockholders.

Our outstanding warrants include public warrants to purchase shares of our Class A common stock issued in connection with D8’s initial public offering (“Public Warrants”) and private placement warrants sold in a private placement to D8’s sponsor in connection with the closing of the initial public offering and in connection with the conversion of D8 working capital loans (the “Private Placement Warrants”). As of December 31, 2024, the Company had 17,248,601 Public Warrants exercisable for 574,953 shares of Class A common stock, and 10,400,000 Private Placement Warrants exercisable for 346,666 shares of Class A common stock outstanding. Thirty (30) whole warrants are exercisable for one share of Class A common stock at an exercise price of $345.00 per share. The warrants became exercisable 30 days after the closing of our Business Combination, which occurred on September 17, 2021. In certain circumstances, the warrants may be exercised on a cashless basis. To the extent such warrants are exercised, additional shares of our Class A common stock will be issued, which will result in dilution to the holders of our Class A common stock and increase the number of shares eligible for resale in the public market. Sales of substantial numbers of such shares in the public market could adversely affect the market price of our Class A common stock, the impact of which is increased as the value of our stock price increases. However, there is no guarantee that the warrants will remain in the money prior to their expiration, and as such, the warrants may expire worthless.

The valuation of our warrants could increase the volatility in our net income (loss) in our consolidated statements of operations.

The change in fair value of our warrants is the result of changes in stock price and warrants outstanding at each reporting period. The change in fair value of warrant liabilities represents the mark-to-market fair value adjustments to the outstanding warrants issued in connection with the initial public offering of D8. Significant changes in our stock price or number of warrants outstanding may adversely affect our net income (loss) in our consolidated statements of operations.

We are an emerging growth company and a smaller reporting company within the meaning of the Securities Act, and we take advantage of certain exemptions from disclosure requirements available to “emerging growth companies” or “smaller reporting companies,” which could make our securities less attractive to investors and may make it more difficult to compare our performance with other public companies.

We are an “emerging growth company” within the meaning of the Securities Act, as modified by the JOBS Act, and we currently take advantage of certain exemptions from various reporting requirements that are applicable to other public companies that are not “emerging growth companies” including, but not limited to, not being required to comply with the auditor attestation requirements of Section 404 of the Sarbanes-Oxley Act, reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements, and exemptions from the requirements of holding a nonbinding advisory vote on executive compensation and stockholder approval of any golden parachute payments not previously approved. As a result, our stockholders may not have access to certain information they may deem important. We will be an emerging growth company until December 31, 2025. We cannot predict whether investors will find our securities less attractive because we rely on these exemptions. If some investors find our securities less attractive as a result of our reliance on these exemptions, the trading prices of our securities may be lower than they otherwise would be, there may be a less active trading market for our securities and the trading prices of our securities may be more volatile.

Further, Section 102(b)(1) of the JOBS Act exempts emerging growth companies from being required to comply with new or revised financial accounting standards until private companies (that is, those that have not had a registration statement under the Securities Act declared effective or do not have a class of securities registered under the Exchange Act) are required to comply with the new or revised financial accounting standards. The JOBS Act provides that a company can elect to opt out of the extended transition period and comply with the requirements that apply to non-emerging growth companies but any such election to opt out is irrevocable. We have elected not to opt out of such extended transition period, which means that when a standard is issued or revised and it has different application dates for public or private companies, we, as an emerging growth company, can adopt the new or revised standard at the time private companies adopt the new or revised standard. This may make comparison of our financial statements with another public company that is not an emerging growth company or is an emerging growth company which has opted out of using the extended transition period difficult or impossible because of the potential differences in accounting standards used.

Additionally, we are a “smaller reporting company” as defined in Item 10(f)(1) of Regulation S-K. Smaller reporting companies may take advantage of certain reduced disclosure obligations, including, among other things, providing only two years of audited financial statements. We will remain a smaller reporting company until the last day of the fiscal year in which (i) the market value of our common stock held by non-affiliates is greater than or equal to $250 million as of the end of that fiscal year’s second fiscal quarter, and (ii) our annual revenues are greater than or equal to $100 million during the last completed fiscal year and the market value of our common stock held by non-affiliates exceeds $700 million as of the end of that fiscal year’s second fiscal quarter. To the extent we take advantage of such reduced disclosure obligations, it may also make comparison of our financial statements with other public companies difficult or impossible.

We cannot predict the impact our dual class structure may have on the stock price of our Class A common stock.

We cannot predict whether our dual class structure will result in a lower or more volatile market price of our Class A common stock or in adverse publicity or other adverse consequences. For example, certain index providers have announced restrictions on including companies with multiple-class share structures in certain of their indexes. Under these policies, our dual class capital structure would make us ineligible for inclusion in certain indices, and as a result, mutual funds, exchange-traded funds and other investment vehicles that attempt to passively track those indices will not be investing in our stock. It is unclear what effect, if any, these policies will have on the valuations of publicly traded companies excluded from such indices, but it is possible that they may depress valuations, as compared to similar companies that are included. As a result, the market price of shares of our Class A common stock could be adversely affected.

If securities or industry analysts do not publish research or reports about our business or if they issue an adverse or misleading opinion regarding our securities, our stock price and trading volume could decline.

The trading market for our securities is influenced by the research and reports that industry or securities analysts publish about us or our business. If one or more of these analysts ceases coverage of us or fails to publish reports on us regularly, we could lose visibility in the financial markets, which could cause the price and trading volume of our securities to decline. Further, if any of these analysts issues an adverse or misleading opinion regarding us, our business model, our industry or our stock performance or if our operating results fail to meet analyst expectations, the price of our securities could also decline.

Delaware law and our organizational documents contain certain provisions, including anti-takeover provisions that limit the ability of stockholders to take certain actions and could delay or discourage takeover attempts that stockholders may consider favorable.

The provisions of the General Corporation Law of the State of Delaware (“DGCL”) and our organizational documents contain provisions that could have the effect of rendering more difficult, delaying, or preventing an acquisition that stockholders may consider favorable, including transactions in which stockholders might otherwise receive a premium for their shares. These provisions could also limit the price that investors might be willing to pay in the future for shares of our common stock, and therefore depress the trading price of our common stock. Additionally, these provisions could also make it difficult for stockholders to take certain actions, including electing directors who are not nominated by the current members of our board of directors or taking other corporate actions, including effecting changes in our management. Among other things, our organizational documents include provisions regarding:

These anti-takeover provisions as well as certain provisions of Delaware law could make it more difficult for a third party to acquire us, even if the third party’s offer may be considered beneficial by many of our stockholders. As a result, our stockholders may be limited in their ability to obtain a premium for their shares. If prospective takeovers are not consummated for any reason, we may experience negative reactions from the financial markets, including negative impacts on the price of our common stock. These provisions could also discourage proxy contests and make it more difficult for our stockholders to elect directors of their choosing and to cause us to take other corporate actions that our stockholders desire.

The provisions of our Charter requiring exclusive forum in the Court of Chancery of the State of Delaware and the federal district courts of the United States for certain types of lawsuits may have the effect of discouraging certain lawsuits, including derivative lawsuits and lawsuits against us or our directors, officers or other employees, by limiting plaintiffs’ ability to bring a claim in a judicial forum that they find favorable.

Our Charter provides that, unless we consent in writing to the selection of an alternative forum, the Court of Chancery of the State of Delaware (or, in the event that such court does not have subject matter jurisdiction, any other court located in the State of Delaware with subject matter jurisdiction), will be the sole and exclusive forum for (a) any derivative action or proceeding brought on behalf of us, (b) any action asserting a claim of breach of a fiduciary duty owed by any current or former director, officer, other employee or stockholder of ours to us or our stockholders, (c) any action asserting a claim against us or our officers or directors arising pursuant to any provision of the DGCL or the Charter or Bylaws or as to which the DGCL confers jurisdiction on the Court of Chancery of the State of Delaware, (d) any action to interpret, apply, enforce or determine the validity of the Charter or the Bylaws or any provision thereof, (e) any action asserting a claim against us or any current or former director, officer, employee, stockholder or agent of ours governed by the internal affairs doctrine of the law of the State of Delaware or (f) any action asserting an “internal corporate claim” as defined in Section 115 of the DGCL. The Charter also provides that, unless we consent in writing to the selection of an alternative forum, to the fullest extent permitted by law, the federal district courts of the United States will be the exclusive forum for the resolutions of any complaint asserting a cause of action arising under the Securities Act. This provision in the Charter does not address or apply to claims that arise under the Exchange Act. Section 27 of the Exchange Act creates exclusive federal jurisdiction over all suits brought to enforce any duty or liability created by the Exchange Act or the rules and regulations thereunder; to the extent these provisions could be construed to apply to such claims, there is uncertainty as to whether a court would enforce such provisions in connection with such claims, and our stockholders cannot waive compliance with the federal securities laws and the rules and regulations thereunder.

Any person or entity purchasing or otherwise acquiring any interest in any of our securities will be deemed to have notice of and consented to the provisions of the Charter described in the preceding paragraph. These provisions may have the effect of discouraging certain lawsuits, including derivative lawsuits and lawsuits against us and our directors and officers, by limiting plaintiffs’ ability to bring a claim in a judicial forum that they find favorable. The enforceability of similar choice of forum provisions in other companies’ certificates of incorporation or bylaws has been challenged in legal proceedings, and it is possible that, in connection with any applicable action brought against us, a court could find the choice of forum provisions contained in the Charter to be inapplicable or unenforceable in such action. Furthermore, if a court were to find these provisions of our certificate of incorporation inapplicable or unenforceable with respect to one or more of the specified types of actions or proceedings, we may incur additional costs associated with resolving such matters in other jurisdictions, which could materially adversely affect our business, financial condition and results of operations and result in a diversion of the time and resources of our management and board of directors.

Changes in laws or regulations, or a failure to comply with any laws and regulations, or any litigation that we may be subject to or involved in may adversely affect our business, investments and results of operations.

We are subject to laws, regulations and rules enacted by national, regional and local governments and the New York Stock Exchange on which our securities are listed. In particular, we are required to comply with certain SEC, NYSE, Delaware and other legal and regulatory requirements. Compliance with, and monitoring of, applicable laws, regulations and rules may be difficult, time-consuming and costly.

Those laws, regulations and rules and their interpretation and application may also change from time to time and those changes could have a material adverse effect on our business, investments and results of operations. For example, it is difficult to predict what impact, if any, changes in federal laws and policies, including those relating to tax, environmental, labor and employment, will have on our business and industry, the economy as a whole, consumer confidence and discretionary spending. Further, a recent ruling by the Court of Chancery in Delaware introduced uncertainty as to whether Section 242(b)(2) of the DGCL required a separate vote in favor of at least a majority of the outstanding shares of Class A common stock, in addition to a vote in favor of at least a majority of the outstanding shares of Class A and Class B common stock, voting together as a single class, to properly authorize shares of Class A common stock. In connection with the Business Combination, our stockholders authorized an increase in the number of shares of Class A common stock under Cayman Islands law, our jurisdiction at the time of the stockholder vote. Accordingly, we do not believe that the Delaware ruling applies to us. However, any failure to comply with applicable laws, regulations or rules, as interpreted and applied, could have a material adverse effect on our business and results of operations. Claims alleging that a portion of our Class A common stock was not authorized could lead to shares of our Class A common stock being voidable and have a material adverse effect on us and our prospects. In addition, uncertainty with respect to our capitalization resulting from the Court of Chancery’s ruling referenced above could have a material adverse impact on us, including on our ability to complete equity financing transactions or issue stock-based compensation to our employees, directors, and officers until the underlying issues are definitively resolved. This uncertainty could impair our ability to execute our business plan, attract and retain employees, management, and directors and adversely affect our commercial relationships.

Although we are not a “controlled company” within the meaning of the NYSE rules, we might become a “controlled company” in the future, and, as a result, our stockholders may not have certain corporate governance protections that are available to stockholders of companies that are not controlled companies.

If more than 50% of the voting power for the election of our directors is held by an individual, a group or another company, we will become a “controlled company” within the meaning of the NYSE corporate governance standards. As of December 31, 2024, Adam Sachs, Sammy Khalifa, and Barry Greene held approximately 71.7% of the voting power of our outstanding capital stock. Messrs. Sachs, Khalifa and Greene have no agreement or arrangement to act together with respect to voting of the Class B common stock, and thus they have not formed a “group” for purposes of controlled company status. Although no individual, group or other company will have more than 50% of our voting power, Messrs. Sachs, Khalifa and Greene may in the future decide to act as a group, and this concentration of voting power would cause us to become a “controlled company” within the meaning of the NYSE corporate governance standards.

As a result, if we become a “controlled company” within the meaning of the NYSE corporate governance standards, then we will not be subject to the requirements that would otherwise require it to have: (i) a majority of independent directors; (ii) a nominating committee comprised solely of independent directors; (iii) compensation of our executive officers determined by a majority of the independent directors or a compensation committee comprised solely of independent directors; and (iv) director nominees selected, or recommended for our board of directors’ selection, either by a majority of the independent directors or a nominating committee comprised solely of independent directors. Each share of Class A common stock initially entitles its holders to one vote on all matters presented to stockholders generally and each share of Class B common stock initially entitles its holders to twenty votes on all matters presented to stockholders generally. Accordingly, Messrs. Sachs, Khalifa and Greene, by virtue of their Class B common stock, hold approximately 71.7% of the voting power of our outstanding capital stock. Accordingly, those owners, if voting in the same manner, will be able to control the election and removal of the directors of our board of directors and thereby determine corporate and management policies, including potential mergers or acquisitions, payment of dividends, asset sales, amendment of the Charter and Bylaws and other significant corporate transactions of ours for so long as they retain significant ownership of Class B common stock. This concentration of ownership may delay or deter possible changes in control of us, which may adversely affect the market price of shares of our Class A common stock.

Our principal stockholders and management will exert significant influence over us and their interests may conflict with yours in the future.

Each share of Class A common stock initially entitles its holders to one vote on all matters presented to stockholders generally and each share of Class B common stock initially entitles its holders to twenty votes on all matters presented to stockholders generally. Accordingly, Messrs. Sachs, Khalifa and Greene, by virtue of their Class B common stock, hold approximately 71.7% of the voting power of our outstanding capital stock. Accordingly, those owners, if voting in the same manner, will be able to control the election and removal of the directors of our board of directors and thereby determine corporate and management policies, including potential mergers or acquisitions, payment of dividends, asset sales, amendment of the Charter and Bylaws and other significant corporate transactions of ours for so long as they retain significant ownership of Class B common stock. This concentration of ownership may delay or deter possible changes in control of us, which may adversely affect the market price of shares of our Class A common stock.

ITEM 1B. UNRESOLVED STAFF COMMENTS.

None.

ITEM 1C. CYBERSECURITY.

Cybersecurity Risk Management and Strategy; Effect of Risk

We also identify our cybersecurity threat risks by comparing our processes to standards set by the National Institute of Standards and Technology, or NIST. To provide for the availability of critical data and systems, maintain regulatory compliance, manage our material risks from cybersecurity threats, and protect against and respond to cybersecurity incidents, we undertake the following activities:

Our incident response plan coordinates the activities we take to prepare for, detect, respond to and recover from cybersecurity incidents, which include processes to triage, assess severity for, escalate, contain, investigate and remediate the incident, as well as to comply with potentially applicable legal obligations and mitigate damage to our business and reputation.

As part of the above processes, we regularly engage with consultants, auditors and other third parties to review our cybersecurity program to help identify areas for continued focus, improvement and compliance.

Our processes also address cybersecurity threat risks associated with our use of third-party service providers, including our vendors who have access to employee data or our systems. Cybersecurity considerations affect the selection and oversight of our third-party service providers. We perform diligence on third parties that have access to our systems, data or facilities that house such systems or data, and continually monitor cybersecurity threat risks identified through such diligence. Our Director of IT is part of our vendor selection process and we review the security policies, procedures, and certifications of all third-party service providers prior to engagement. Additionally, we generally require those third parties that could introduce significant cybersecurity risk to us to agree by contract to manage their cybersecurity risks in specified ways.

In the last two fiscal years, we have not experienced any material cybersecurity incidents and the expenses we have incurred from cybersecurity incidents were immaterial. This includes penalties and settlements, of which there were none.

ITEM 2. PROPERTIES.

We currently maintain all of our operations, including executive offices and manufacturing and laboratory space in adjacent buildings at 78 and 62 Fourth Avenue, Waltham, Massachusetts 02451. We lease office space under operating leases. We consider our current office space adequate for our current operations.

ITEM 3. LEGAL PROCEEDINGS.

As of the date of this Annual Report on Form 10-K, to our knowledge, we are not party to and our property is not subject to any material pending legal proceedings. However, from time to time, we may become involved in legal proceedings or subject to claims that arise in the ordinary course of our business activities. Regardless of the outcome, such legal proceedings or claims could have an adverse impact on us because of defense and settlement costs, diversion of management resources, negative publicity and reputational harm, and other factors.

ITEM 4. MINE SAFETY DISCLOSURES.

Not applicable.

PART II

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES.

Market Information

Our Class A common stock and Public Warrants are currently listed on the NYSE under the symbols “RBOT,” and “RBOT WS,” respectively.

Holders

As of January 24, 2025, there were approximately 28 holders of record of our Class A common stock, three holders of record of our Class B common stock, one holder of record of the Public Warrants and two holders of record of the Private Placement Warrants.

Such numbers do not include beneficial owners holding our securities through nominee names. There is no public market for our Class B common stock.

Dividends

We have not paid any cash dividends on our Class A common stock or Class B common stock to date. The payment of cash dividends in the future will be dependent upon our revenues and earnings, if any, capital requirements and general financial condition. The payment of any cash dividends will be within the discretion of our board of directors at such time.

Unregistered Sales of Securities

Not applicable.

Issuer Purchases of Equity Securities

Not applicable.

ITEM 6. [RESERVED]

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS. 

The following discussion and analysis provides information which management believes is relevant to an assessment and understanding of our consolidated results of operations and financial condition. This discussion contains forward-looking statements and involves numerous risks and uncertainties, including, but not limited to, those described in the “Risk Factors” section of this Annual Report on Form 10-K. Actual results may differ materially from those contained in any forward-looking statements. Unless the context otherwise requires, references to “we”, “us”, “our”, and “the Company” are intended to mean the business and operations of Vicarious Surgical Inc. and its consolidated subsidiaries.

Overview

We are combining advanced miniaturized robotics, computer science, sensing and 3D visualization to build a new category of intelligent and affordable, single-port surgical robot that virtually transports surgeons inside the patient to perform minimally invasive surgery. With our next-generation robotics technology which is being designed with proprietary human-like motion, we are seeking to improve patient outcomes, as well as the cost and efficacy of surgical procedures. Led by a visionary team of engineers from MIT, we intend to deliver the next generation in robotic surgery, designed to solve the shortcomings of both open surgery, as well as current manual and robot-assisted minimally invasive surgery.

We estimate there are over 45 million soft tissue surgical procedures (including an estimated 3.9 million ventral hernia procedures), addressable annually worldwide by our technology. Of these procedures, it is estimated that more than 50% are performed using open surgery, and less than 5% are performed by current robot-assisted minimally invasive surgery.

The dollar amounts set forth in this section are presented in thousands, except for per share amounts.

Financial Highlights

We incurred net losses of $63,223 and $71,071 for the years ended December 31, 2024 and 2023, respectively. The 2024 net loss is inclusive of a gain of $43 related to the change in valuation of our warrant obligations. The 2023 net loss is inclusive of a gain of $5,191 related to the change in valuation of our warrant obligations. Our loss from operations prior to the warrant gain and other income and expense items was $66,555 and $80,666 for the years ended December 31, 2024 and 2023, respectively, representing a period-over-period decrease in expenses of 17%, which was primarily due to decreases of $11,022 in personnel-related expenses, $1,435 in insurance expense, $797 in materials and supplies and $578 in software expense. The decrease in personnel-related expenses was due primarily to a 28% decrease in average headcount, from an average of 177 people in 2023 to an average of 127 people in 2024.

Factors Affecting Results of Operations

The following factors have been important to our business and we expect them to impact our results of operations and financial condition in future periods:

Revenue

To date, we have not generated any revenue. We do not expect to generate revenue unless and until we receive FDA authorization of our product candidate. The amount of revenue, if any, from initial sales of a new product is difficult to predict and, even if we successfully commercialize our product candidate upon approval and begin generating revenue, such revenues will initially only modestly reduce our continued net losses resulting from our research and development and marketing activities which we expect to continue to increase even after market authorization is received.

Research and Development (“R&D”) Expenses

R&D expenses consist primarily of engineering, product development, regulatory expenses, medical affairs, and other costs associated with product candidates and technologies that are in development. These expenses include employee compensation, including stock-based compensation, supplies, consulting, prototyping, testing, materials, travel expenses, depreciation and an allocation of facility overhead expenses. Additionally, R&D expenses include internal and external costs associated with our regulatory compliance and quality assurance functions and overhead costs. We expect R&D expenses to vary over time depending on the level and timing of our new product development efforts, as well as our clinical development, clinical trial and other related activities.

General and Administrative Expenses

General and administrative (“G&A”) expenses consist primarily of compensation for personnel, including stock-based compensation, related to executive, finance and accounting, information technology and human resource functions. Other G&A expenses include travel expenses, professional services fees (including legal, audit and tax fees), insurance costs, general corporate expenses and allocated facilities-related expenses. We expect G&A expenses to continue to increase in absolute dollars as we expand our infrastructure to both drive and support the anticipated growth due to additional legal, accounting, insurance and other expenses associated with being a public company.

Sales and Marketing Expenses

Sales and marketing (“S&M”) expenses consist primarily of compensation for personnel, including stock-based compensation, related to selling and marketing functions and physician education programs. Other S&M expenses include training, travel expenses, promotional activities, marketing initiatives, market research and analysis, conferences and trade shows, professional services fees and allocated facilities-related expenses. We expect S&M expenses to continue to increase in absolute dollars as we increase potential customers’ awareness of our presence and prepare our sales and marketing function for our product launch at a future, yet undetermined date.

Change in Fair Value of Warrant Liabilities

The change in fair value of warrant liability represents the mark-to-market fair value adjustments to the outstanding Public Warrants and Private Placement Warrants assumed as part of the consummation of the Business Combination on September 17, 2021. The change in fair value of our Private Placement Warrants is primarily the result of the change in the underlying stock price of our stock used in the Black-Scholes option pricing model while the Public Warrants are marked-to-market based on their price on the NYSE. The warrant liability was measured at fair value initially on September 17, 2021 and is remeasured at exercise, and for warrants that remain outstanding at the end of each subsequent reporting period.

Interest Income

Interest income consists primarily of interest income earned on our cash and cash equivalents and short-term investments.

Interest Expense

Interest expense consists primarily of interest incurred on our equipment loans that were paid off in April 2023.

Results of Operations

The following table sets forth our historical operating results for the years ended December 31, 2024 and 2023:

Comparison of the years ended December 31, 2024 and 2023

Research and Development Expenses. R&D expenses decreased $7,423, or 16%, to $40,155 during the year ended December 31, 2024, compared to $47,578 during the year ended December 31, 2023. This decrease was primarily due to decreases of $8,283 of personnel-related expenses, $740 in materials and supplies, $377 in software expense, $130 in facilities and partially offset by increases of $1,899 in professional services and $252 in depreciation expense. The decrease in personnel-related expenses was due primarily to a decrease in average headcount of 25%, from an average of 137 people in 2023 to an average of 103 people in 2024.

Sales and Marketing Expenses. S&M expenses decreased $1,705, or 27%, from $6,230 in the year ended 2023 to $4,525 during the year ended December 31, 2024. This decrease was primarily due to decreases of $940 in personnel-related expenses, $658 in professional services, $88 in travel expenses and partially offset by a $103 increase in software expenses. The decrease in personnel-related expenses was primarily due to a decrease in average headcount of 44%, from an average of 16 people in 2023 to an average of 9 people in 2024.

General and Administrative Expenses. G&A expenses decreased $4,983, or 19%, to $21,875 during the year ended December 31, 2024, compared to $26,858 during the year ended December 31, 2023. This decrease was primarily due to decreases of $1,799 in personnel-related expenses, $1,478 in insurance expenses, $974 in professional services, $304 in software expenses, $77 in travel expenses and $346 in other operating costs. The decrease in personnel-related expenses was primarily due to a decrease in average headcount of 36%, from an average of 25 people in 2023 to an average of 16 people in 2024.

Change in Fair Value of Warrant Liabilities. The change in fair value of warrant liabilities during the year ended December 31, 2024 was a $43 gain. The change in fair value of warrant liability resulted from the remeasurement of the Public Warrant and Private Placement Warrant liabilities between December 31, 2023 and the end of the reporting period, December 31, 2024.

Interest and Other Income. Interest and other income decreased by $1,140 to $3,289 during the year ended December 31, 2024, compared to $4,429 during the year ended December 31, 2023. The decrease was primarily due to a decrease in interest income from short-term investments.

Interest Expense. Interest expense decreased by $25 to $0 during the year ended December 31, 2024, compared to $25 during the year ended December 31, 2023. The decrease was primarily due to the equipment loans being paid off in April 2023.

Income Taxes. Our income tax provision consists of an estimate for U.S. federal and state income taxes based on enacted rates, as adjusted for allowable credits, deductions, uncertain tax positions, changes in deferred tax assets and liabilities and changes in tax law. Due to historical cumulative losses and expected future losses, we maintain a full valuation allowance against our U.S. and state deferred tax assets.

Liquidity and Capital Resources

To date, our primary sources of capital have been private placements of preferred stock prior to the Business Combination, public and private sales of securities and the issuance of common stock. Net cash used in our operating activities for the years ended December 31, 2024 and 2023 was $49,956 and $62,305, respectively. As of December 31, 2024, we held cash and cash equivalents of $9,737, short-term investments of $39,360 and had an accumulated deficit of $195,935.

Excluding the non-cash impact of potential changes in the fair value of warrant liabilities, we expect net losses to continue in connection with our ongoing activities, particularly as we continue to invest in commercialization and new product development. Based on our current planned operations, we do not believe that our current cash, cash equivalents and short-term investments balance of $49,097 as of December 31, 2024 will be sufficient to support our operations beyond the next twelve months from the date of issuance of these financial statements. We currently expect that our cash, cash equivalents and short-term investments will be sufficient to support our operations into the first quarter of 2026. As such, there is substantial doubt about the Company’s ability to continue as a going concern. We may consider raising additional capital to expand our business, to pursue strategic investments, to take advantage of financing opportunities or for other reasons.

Our future capital requirements will depend on many factors, including, but not limited to, any changes in the size, number and scope of clinical trials we may be required to conduct, the timing and conditions of market authorization (if any) for the Vicarious Surgical System, whether we are able to successfully commercialize the Vicarious Surgical System, if approved, additional product candidates we may choose to develop, fluctuations in the cost and timing of our business activities, including manufacturing, hiring and protection of our intellectual property portfolio, and the other risks and uncertainties described herein, under the caption “Risk Factors” in Part I, Item 1A and in other filings that we make with the Securities and Exchange Commission from time to time.

We expect that we will need to obtain substantial additional funding in order to complete our clinical trials, obtain market authorization for the Vicarious Surgical System, and commercialize it, if approved. Until such time, if ever, as we can generate sufficient revenues to support our expenses, we may seek to sell additional common or preferred equity or convertible debt securities, enter into an additional credit facility or another form of third-party funding or seek other debt financing. The sale of equity and convertible debt securities may result in dilution to our stockholders. Preferred equity securities or convertible debt could provide for rights, preferences or privileges senior to those of our common stock, including liquidation or other preferences that could adversely affect the rights of our existing stockholders. The terms of debt securities issued or borrowings pursuant to a credit agreement could impose significant restrictions on our operations. If we raise funds through collaborations and licensing arrangements, we might be required to relinquish significant rights to our platform technologies or product candidates or grant licenses on terms that are not favorable to us, or that we would otherwise seek to develop or commercialize ourselves. Additional capital may not be available on reasonable terms, or at all, particularly given the current macroeconomic environment, including diminished liquidity and credit availability, declines in consumer confidence and economic growth, rising interest rates, inflation, uncertainty about economic stability and potential for economic recession. If the equity and credit markets deteriorate, it may make any necessary debt or equity financing more difficult to obtain, more costly and more dilutive. If we are unable to raise capital when needed or on attractive terms, we could be forced to significantly delay, scale back or discontinue the development, market authorization or commercialization of the Vicarious Surgical System or future product candidates, or seek collaborators at an earlier stage than otherwise would be desirable or on terms that are less favorable than might otherwise be available.

On October 7, 2022, we filed a universal shelf registration statement on Form S-3 (the “Form S-3”), which was declared effective by the SEC on October 27, 2022, on which we registered for sale up to $400 million of any combination of our Class A common stock, preferred stock, debt securities, warrants, rights and/or units from time to time and at prices and on terms that we may determine, which includes up to $100 million of Class A common stock that we may issue and sell from time to time, through Cowen and Company, LLC acting as our sales agent, pursuant to the sales agreement that we entered into with Cowen and Company, LLC on October 7, 2022 for our “at-the-market” equity program. In December 2022, we issued 3,048,781 shares of Class A common stock under our sales agreement with Cowen and Company, LLC, resulting in gross proceeds of $10.0 million. We did not sell any shares of our Class A common stock under our sales agreement with Cowen and Company, LLC for the year ended December 31, 2024.

On August 2, 2023, we entered into an underwriting agreement related to the public offering of 45,000,000 shares of our Class A common stock, at a public offering price of $1.00 per share less the underwriting discounts and commission, pursuant to the Form S-3. We received approximately $45 million in gross proceeds from this offering, before deducting underwriting discounts and commission and offering expenses. The offering closed on August 7, 2023. In addition, 2,045,224 shares of Class A common stock were issued upon exercise of by the underwriters at their option to purchase additional shares at the same offering price, which closed on August 29, 2023. The gross proceeds from the offering of 47,045,224 shares of our Class A common stock were $47.0 million and net proceeds of $44.2 million, after deducting underwriting discounts and commissions and other offering expenses payable by us.

Cash

Our cash and cash equivalents and short-term investments balance as of December 31, 2024 was $9,737 and $39,360, respectively. Our future capital requirements may vary from those currently planned and will depend on various factors, including the timing and extent of R&D spending and spending on other strategic business initiatives.

Cash Flows Summary

Comparison of the year ended December 31, 2024 and December 31, 2023

Cash flows used in Operating Activities

Net cash used in operating activities during the year ended December 31, 2024 was $49,956, attributable to a net loss of $63,223 less a net change in our net operating assets and liabilities of $594 and plus non-cash items of $13,861. Non-cash items consisted of $11,904 in stock-based compensation, $2,107 of depreciation and $899 for non-cash lease expenses, partially offset by a $43 gain from our warrant liabilities and a change in accrued interest and net accretion of discounts on marketable securities of $1,008. The $594 change in our net operating assets and liabilities was primarily due to decreases of $1,047 in lease liabilities, $96 in accounts payable, partially offset by an $175 decrease in prepaid and other current assets, a $309 increase in accrued expenses, and a $65 decrease in other non-current assets.

Net cash used in operating activities during the year ended December 31, 2023 was $62,305, attributable to a net loss of $71,071 less a net change in our net operating assets and liabilities of $746 and plus non-cash items of $9,512. Non-cash items consisted of $13,267 in stock-based compensation, $1,854 of depreciation and $814 for non-cash lease expenses, partially offset by a $5,191 gain from our warrant liabilities and a change in accrued interest and net accretion of discounts on marketable securities of $1,232. The $746 change in our net operating assets and liabilities was primarily due to decreases of $1,420 in prepaid and other current assets and $833 in accrued expenses, partially offset by an $838 decrease in lease liabilities, a $473 decrease in accounts payable, and a $22 increase in other non-current assets.

Cash flows provided by (used in) Investing Activities

Net cash provided by investing activities for the year ended December 31, 2024 was $6,863 consisting of $65,192 in proceeds from sales and maturities of available-for-sale investments and partially offset by $58,149 used for purchases of available-for-sale investments and $180 for fixed asset purchases.

Net cash used by investing activities for the year ended December 31, 2023 was $45,783 consisting of $75,704 used for purchases of available-for-sale investments and $1,670 for fixed asset purchases, and partially offset by proceeds of $31,591 from sales and maturities of available-for-sale investments.

Cash flows provided by Financing Activities

Net cash provided by financing activities for the year ended December 31, 2024 was $8 that was received for stock option exercises.

Net cash provided by financing activities for the year ended December 31, 2023 was $44,702 resulting from $44,222 of proceeds from the issuance of common stock net of issuance costs, $296 of proceeds from the exercise of stock options, $200 in proceeds from a stockholder of the Company pursuant to the application of the Section 16 short swing profit rules and partially offset by $16 of equipment loan repayments.

Critical Accounting Policies and Estimates

Our consolidated financial statements have been prepared in accordance with U.S. GAAP. The preparation of these consolidated financial statements requires us to make estimates and assumptions that affect the reported amounts of assets and liabilities and the disclosure of contingent assets and liabilities as of the consolidated balance sheet date, as well as the reported expenses incurred during the reporting periods. Our management bases its estimates on historical experience and on various other assumptions believed to be reasonable, the results of which form the basis for making judgments about the carrying values of assets and liabilities. Actual results could differ from those estimates, and such differences could be material to our consolidated financial statements.

While our significant accounting policies are described in the notes to our historical financial statements (see Note 2, “Summary of Significant Accounting Policies – Recently Issued Accounting Pronouncements” in our financial statements contained in this Annual Report on Form 10-K), we believe the following critical accounting policy requires significant judgment and estimates in the preparation of our financial statements:

Warrant Liabilities

We recognize our warrants as liabilities at fair value and adjust the warrant liability to fair value at each reporting period. The liabilities are subject to re-measurement at each balance sheet date until exercised, and any change in fair value is recognized in the statement of operations. The fair value of Public Warrants is determined from their trading value on public markets. The fair value of Private Placement Warrants is calculated using the Black-Scholes option pricing model. The assumptions used in the model are the Company’s stock price, exercise price, expected term, volatility, interest rate, and dividend yield. 

The Company estimates the volatility of its warrants based on implied volatility from the Company’s Public Warrants and from the historical volatility of the Company’s common stock that matches the expected remaining life of the warrants. The risk-free interest rate is based on the U.S. Treasury zero-coupon yield curve on the grant date for a maturity similar to the expected remaining life of the warrants. The expected life of the warrants is assumed to be equivalent to their remaining contractual term. The dividend rate is based on the historical rate, which the Company anticipates remaining at zero.

Recently Adopted Accounting Pronouncements

A description of recently issued accounting pronouncements that may potentially impact our financial position and results of operations is disclosed in Note 2, “Summary of Significant Accounting Policies – Recently Issued Accounting Pronouncements” in our financial statements contained in this Annual Report on Form 10-K.

Emerging Growth Company

We are an “emerging growth company,” as defined in the JOBS Act. Pursuant to the JOBS Act, an emerging growth company is provided the option to adopt new or revised accounting standards that may be issued by FASB or the SEC either (i) within the same periods as those otherwise applicable to non-emerging growth companies or (ii) within the same time periods as private companies. We currently take advantage of the exemption for complying with new or revised accounting standards within the same time periods as private companies. Accordingly, the information contained herein may be different than the information you receive from other public companies.

We also take advantage of some of the reduced regulatory and reporting requirements of emerging growth companies pursuant to the JOBS Act and intend to continue to do so as long as we qualify as an emerging growth company, including, but not limited to, not being required to comply with the auditor attestation requirements of Section 404(b) of the Sarbanes-Oxley Act, reduced disclosure obligations regarding executive compensation, and exemptions from the requirements of holding non-binding advisory votes on executive compensation and golden parachute payments. 

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK. 

We are a smaller reporting company as defined by Rule 12b-2 of the Exchange Act and are not required to provide the information required under this item.

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA.

Audited Consolidated Financial Statements of Vicarious Surgical Inc.

ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE.

Not applicable.

ITEM 9A. CONTROLS AND PROCEDURES.

Background and Remediation of Material Weakness

In connection with our evaluation of disclosure controls and procedures covering our consolidated financial statements as of December 31, 2024, we identified material weaknesses in our internal control over financial reporting. We have concluded that material weaknesses exist in our disclosure controls and procedures, including internal control over financial reporting, as we do not have the necessary business processes, personnel and related internal controls to operate in a manner to satisfy the accounting and financial reporting requirements of a public company. These material weaknesses manifested themselves in ways that included the improper segregation of duties relating to review of the recording of journal entries and the reconciliation of key accounts and safeguarding of assets, as well as the analysis of accounting for certain transactions and accounts, improper controls related to information technology, ineffective risk assessment process and documentation and monitoring of control processes, accounting policies and procedures.

We are focused on designing and implementing effective internal controls measures to improve our evaluation of disclosure controls and procedures, including internal control over financial reporting, and remediate the material weaknesses. In order to remediate these material weaknesses, we have taken and plan to take the following actions:

These actions and planned actions are subject to ongoing evaluation by management and will require testing and validation of design and operating effectiveness of internal control over financial reporting over future periods. We are committed to the continuous improvement of our internal control over financial reporting and will continue to review the internal control over financial reporting.

Evaluation of Disclosure Controls and Procedures

Under the supervision and with the participation of our management, including our principal executive officer and principal financial and accounting officer, we conducted an evaluation of the effectiveness of our disclosure controls and procedures as of the end of the fiscal year ended December 31, 2024, as such term is defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act. Based upon their evaluation, our Chief Executive Officer and Chief Financial Officer concluded that our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act) were not effective as of December 31, 2024 to provide reasonable assurance that information required to be disclosed in the reports we file and submit under the Securities and Exchange Act is recorded, processed, summarized and reported as and when required.

Disclosure controls and procedures are designed to ensure that information required to be disclosed by us in our Exchange Act reports is recorded, processed, summarized, and reported within the time periods specified in the SEC’s rules and forms, and that such information is accumulated and communicated to our management, including our principal executive officer and principal financial officer or persons performing similar functions, as appropriate to allow timely decisions regarding required disclosure.

Changes in Internal Control over Financial Reporting

There have been no changes in our internal control over financial reporting identified in connection with the evaluation of such internal control required by Rules 13a-15(d) and 15d-15(d) under the Exchange Act that occurred during the fiscal year ended December 31, 2024 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

ITEM 9B. OTHER INFORMATION.

No director or officer adopted or terminated any Rule 10b5-1 plan or any non-Rule 10b5-1 trading arrangement during the fiscal quarter ended December 31, 2024.

ITEM 9C. DISCLOSURE REGARDING FOREIGN JURISDICTIONS THAT PREVENT INSPECTIONS.

Not applicable.

PART III

Item 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE.

The response to this item is incorporated by reference from the discussion responsive thereto under the captions “Management and Corporate Governance,” “Delinquent Section 16(a) Reports” and “Code of Conduct and Ethics” in the Company’s Proxy Statement for the 2025 Annual Meeting of Stockholders.

Item 11. EXECUTIVE COMPENSATION.

The response to this item is incorporated by reference from the discussion responsive thereto under the captions “Executive Officer and Director Compensation,” in the Company’s Proxy Statement for the 2025 Annual Meeting of Stockholders.

Item 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS.

The response to this item is incorporated by reference from the discussion responsive thereto under the captions “Security Ownership of Certain Beneficial Owners and Management” and “Equity Compensation Plan Information” in the Company’s Proxy Statement for the 2025 Annual Meeting of Stockholders.

Item 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE.

The response to this item is incorporated by reference from the discussion responsive thereto under the captions “Certain Relationships and Related Person Transactions” and “Management and Corporate Governance” in the Company’s Proxy Statement for the 2025 Annual Meeting of Stockholders.

Item 14. PRINCIPAL ACCOUNTANT FEES AND SERVICES.

The response to this item is incorporated by reference from the discussion responsive thereto under the caption “Ratification of Appointment of Independent Registered Public Accounting Firm” in the Company’s Proxy Statement for the 2025 Annual Meeting of Stockholders.

PART IV

ITEM 15. EXHIBITS, FINANCIAL STATEMENT SCHEDULES.

Item 15(a). The following documents are filed as part of this annual report on Form 10-K:

Item 15(a)(1) and (2) See “Index to Consolidated Financial Statements and Financial Statement Schedules” at Item 8 to this Annual Report on Form 10-K. Other financial statement schedules have not been included because they are not applicable or the information is included in the financial statements or notes thereto.

Item 15(a)(3) Exhibits

The following is a list of exhibits filed as part of this Annual Report on Form 10-K.