Wesdome Gold Mines Ltd. (TSX: WDO) (“Wesdome” or the “Company”)
today announces underground exploration drilling results from the
Kiena Deep Zone and initial surface exploration drilling results at
the Company’s 100% owned Kiena Mine Complex in Val d'Or, Quebec.
Kiena Deep A Zone and Footwall Zone
DrillingOn March 23, 2021, Wesdome announced the discovery
of a new high grade gold zone in the footwall of the A Zone, (the
Footwall Zone), which has been the focus of our in-fill drilling
over the past several months.
The Footwall Zone is interpreted as lenses of
gold mineralization located within a 50 metre (‘m’) wide corridor
adjacent to the footwall of the A2 Zone. Gold mineralization is
associated with quartz ± visible gold veins that are spatially
associated with amphibolite altered komatiite, basaltic komatiite
and basalt units.
Because the recent drilling has been impacted by
the industry wide shortage of skilled drillers, 11 holes and their
wedges having reached the Footwall and A Zones since the last press
release. As such, additional drilling is still required to
determine the geometry of the mineralized lenses forming the
corridor of the Footwall Zone. The orientation, dip and geometry of
these new lenses will need to be confirmed in order to determine
true widths. However, it is interpreted that the Footwall zone runs
parallel to the A Zone and extends at least 300 m. Mineralization
remains open laterally and down plunge (Figure 1).
Figure 1:
https://www.globenewswire.com/NewsRoom/AttachmentNg/3430c154-f363-40ca-837d-555870a93e9c
Additionally, the recent A Zone high grade drill
intersections inside and outside of the current A Zone resource
block model shows the potential to expand the current resource
estimate.
Highlights of the recent drilling are listed below and
summarized in Table 1.
- Hole 6762: 132.1 g/t Au over 7.4 m
core length (27.6 g/t Au capped, 3.9 m true width) A Zone
- Hole 6752W4: 34.3 g/t Au over 7.2 m
core length (32.2 g/t Au capped, 3.5 m true width) A2 Zone
- Hole 6762W2: 13.4 g/t Au over 16.0 m
core length (13.0 g/t Au capped) Footwall Zone
- Hole 6762W1: 20.1 g/t Au over 9.1 m
core length (18.5 g/t Au capped) Footwall Zone
All assays cut to 90.0 g/t Au. True widths are unknown at this
time for the Footwall Zone.
Regional Surface Exploration
Drilling
Initial surface drilling has focused on the
Presqu’ile and Shawkey areas located northwest and southeast of the
Kiena Mine, respectively (Figure 2). Since July 2021, two drills on
barges have been testing the continuity of some gold anomalies in
the Jacola Formation which host the Kiena mine. In early September
2021, a third drill was added in the Shawkey area to follow up on
historical gold anomalies and newly intersected mineralization.
Figure
2: https://www.globenewswire.com/NewsRoom/AttachmentNg/0eee8d9b-acee-4ed5-b4c0-25861f3661f1
Highlights of the recent drilling at Presqu’ìle and Shawkey
zones are listed below and summarized in Table 2.
- Hole PR-20-001: 1515.0 g/t Au over
0.5 m core length
- Hole PR-20-001: 23.1 g/t Au over 2.2
m core length
- Hole PR-21-008: 63.9 g/t Au over 0.9
m core length
- Hole SW-21-009: 20.80 g/t Au over
1.5 m core length
- Hole SW-21-013: 29.40 g/t Au over
1.1 m core length
The true widths of the intersections of the
Presqu’ìle zones are believed to be of 70% or higher of the
intersected length.
Previous drilling at the Presqu’ile zones has
defined a small near surface mineral resource (see press release
dated December 15th, 2020). Eleven of the reported holes for this
zone intersected gold mineralization and helped to define a steeply
east-plunging trend. Future drilling will continue to test the
extent of the mineralization which is near to an underground access
at a vertical depth of 320 m below surface and approximately 450 m
to the north.
The drilling in the Shawkey area was following
up on gold anomalies in historical holes and exploring untested
areas along strike. Eight holes intersected a new zone called
Bourgo which is perpendicular to the general northwest-southeast
trend. It consists of quartz veins with very low sulphide content
hosted in a komatiitic basalt unit. The northern orientation is
similar to the orientation of the nearby Kiena Deep A Zones.
Drilling is planned to improve the understanding of this area.
Mr. Duncan Middlemiss, President and CEO
commented, “We are pleased with the recent underground exploration
drilling that continues to define the high grade Footwall Zone,
which already extends over 300 metres down plunge. This new
discovery could have major positive impacts on the project as the
underground infrastructure utilized to access the A Zones would
only incrementally be added to for the potential mining of the
Footwall Zones. It is our goal to include this zone in the updated
mineral resource estimate at year end.
We are also pleased with initial surface
exploration results which could potentially increase our resource
base in areas proximal to the mine. These results also illustrate
the excellent potential to find new discoveries on our large, and
hugely underexplored property. The fact we have mineralization in a
similar orientation as the A Zones in the Bourgo Zone is notable.
Any near mine resource has the potential to add additional mill
feed and place less strain with increased flexibility on mine
production.
Drilling has been impacted by a very competitive
market, and we are working with our drilling contractors to
mitigate the shortage of drillers in the area and hope to increase
drilling rates going forward.
We are also pleased with the progress being made
ramping up production at Kiena. The first stope from the Kiena Deep
A Zone is now in production as per plan and will be processed soon
at the Kiena mill, which has been processing ore from the S-50 zone
since mid-July. We are satisfied with the advancement of the
project so far and will provide updates accordingly.”
TECHNICAL DISCLOSUREThe
underground technical and geoscientific content of this release has
been compiled, reviewed and approved by Bruno Turcotte, P.Geo.,
(OGQ #453) Chief Geologist – Underground Exploration of the
Company. The surface technical and geoscientific content of this
release has been compiled, reviewed and approved by Yan Ducharme,
P.Geo., (OGQ #690) Exploration Manager of the Company. Both are a
"Qualified Person" as defined in National Instrument 43-101
-Standards of Disclosure for Mineral Projects.
Analytical work was performed by ALS Minerals of
Val-d’Or (Quebec), a certified commercial laboratory (Accredited
Lab #689). Sample preparation was done at ALS Minerals in Val d'Or
(Quebec). Assaying was done by fire assay methods with an atomic
absorption finish. Any sample assaying >3 g/t Au was rerun by
fire assay method with gravimetric finish, and any sample assaying
>10 g/t Au was rerun with the metallic sieve method. In addition
to laboratory internal duplicates, standards and blanks, the
geology department inserts blind duplicates, standards and blanks
into the sample stream at a frequency of one in twenty to monitor
quality control.
COVID-19The health and safety
of our employees, contractors, vendors, and consultants is the
Company’s top priority. In response to the COVID-19 outbreak,
Wesdome has adopted all public health guidelines regarding safety
measures and protocols at all of its mine operations and corporate
offices. In addition, our internal COVID-19 Taskforce continues to
monitor developments and implement policies and programs intended
to protect those who are engaged in business with the Company.
Through care and planning, to date the Company
has successfully maintained operations, however there can be no
assurance that this will continue despite our best efforts. Future
conditions may warrant reduced or suspended production activities
which could negatively impact our ability to maintain projected
timelines and objectives. Consequently, the Company’s actual future
production and production guidance is subject to higher levels of
risk than usual. We are continuing to closely monitor the situation
and will provide updates as they become available.
ABOUT WESDOMEWesdome Gold Mines
is a 100% Canadian focused Company that has had over 30 years of
continuous gold mining operations in Canada. The Company’s
strategy is to build an intermediate gold producer, producing
200,000+ ounces from two mines in Ontario and Quebec. The Eagle
River Complex in Wawa, Ontario is currently increasing gold
production from the high-grade Eagle River Underground Mine.
Wesdome is actively exploring its brownfields asset, the Kiena
Complex in Val d’Or, Quebec. The Kiena Complex is a fully
permitted former mine with a 930-metre shaft and 2,000
tonne-per-day mill. The Company is currently completing a PFS
in support of a production restart decision. The Company is in the
process of divesting of its Moss Lake gold deposit, located 100
kilometres (“kms”) west of Thunder Bay, Ontario. The Company has
approximately 140.8 million shares issued and outstanding and
trades on the Toronto Stock Exchange under the symbol “WDO.”
For further information, please
contact:
Duncan MiddlemissPresident and CEO416-360-3743 ext.
2029duncan.middlemiss@wesdome.com |
or |
Lindsay Carpenter DunlopVP Investor Relations416-360-3743 ext.
2025lindsay.dunlop@wesdome.com |
|
|
|
220 Bay St, Suite 1200Toronto, ON, M5J 2W4Toll Free:
1-866-4-WDO-TSXPhone: 416-360-3743, Fax: 416-360-7620Website:
www.wesdome.com
This news release contains “forward-looking
information” which may include, but is not limited to, statements
with respect to the future financial or operating performance of
the Company and its projects. Often, but not always,
forward-looking statements can be identified by the use of words
such as “plans”, “expects”, “is expected”, “budget”, “scheduled”,
“estimates”, “forecasts”, “intends”, “anticipates”, or “believes”
or variations (including negative variations) of such words and
phrases, or state that certain actions, events or results “may”,
“could”, “would”, “might” or “will” be taken, occur or be achieved.
Forward-looking statements involve known and unknown risks,
uncertainties and other factors which may cause the actual results,
performance or achievements of the Company to be materially
different from any future results, performance or achievements
expressed or implied by the forward-looking statements.
Forward-looking statements contained herein are made as of the date
of this press release and the Company disclaims any obligation to
update any forward-looking statements, whether as a result of new
information, future events or results or otherwise. There can be no
assurance that forward-looking statements will prove to be
accurate, as actual results and future events could differ
materially from those anticipated in such statements. The Company
undertakes no obligation to update forward-looking statements if
circumstances, management’s estimates or opinions should change,
except as required by securities legislation. Accordingly, the
reader is cautioned not to place undue reliance on forward-looking
statements. The Company has included in this news release certain
non-IFRS performance measures, including, but not limited to, mine
operating profit, mining and processing costs and cash costs. Cash
costs per ounce reflect actual mine operating costs incurred during
the fiscal period divided by the number of ounces produced. These
measures are not defined under IFRS and therefore should not be
considered in isolation or as an alternative to or more meaningful
than, net income (loss) or cash flow from operating activities as
determined in accordance with IFRS as an indicator of our financial
performance or liquidity. The Company believes that, in addition to
conventional measures prepared in accordance with IFRS, certain
investors use this information to evaluate the Company's
performance and ability to generate cash flow
Table 1: Kiena Complex Underground Drilling Assay and
Composite Results
Composites
Hole No. |
From(m) |
To(m) |
CoreLength(m) |
EstimatedTrue width(m) |
Grade(g/t Au) |
Cut Grade(90 g/tAu) |
NameZone |
6759 |
70.0 |
74.3 |
4.3 |
4.3 |
7.45 |
7.45 |
A Zone |
6762 |
444.6 |
452.0 |
7.4 |
3.9 |
132.09 |
27.64 |
A Zone |
6767 |
71.0 |
75.5 |
4.5 |
4.4 |
19.55 |
19.55 |
A Zone |
6785W1 |
186.2 |
193.7 |
7.5 |
3.2 |
6.00 |
6.00 |
A Zone |
6742W11 |
358.0 |
362.2 |
4.2 |
3.4 |
5.86 |
5.86 |
A1 Zone |
6752 |
762.2 |
769.9 |
7.6 |
6.7 |
17.85 |
15.69 |
A1 Zone |
6752W4 |
239.0 |
243.5 |
4.5 |
3.0 |
10.35 |
10.35 |
A1 Zone |
6755W1 |
231.0 |
235.9 |
4.9 |
4.1 |
8.45 |
8.45 |
A1 Zone |
6762 |
458.0 |
466.0 |
8.0 |
3.7 |
141.97 |
15.47 |
A1 Zone |
6762W1 |
214.2 |
225.2 |
11.0 |
4.1 |
4.14 |
4.14 |
A1 Zone |
6762W3 |
222.4 |
242.8 |
20.4 |
4.2 |
8.10 |
8.10 |
A1 Zone |
6785 |
372.3 |
377.3 |
5.0 |
3.5 |
5.11 |
5.11 |
A1 Zone |
6752W1 |
300.4 |
310.5 |
10.1 |
3.7 |
14.10 |
14.10 |
A2 Zone |
6752W2 |
158.5 |
164.2 |
5.7 |
4.4 |
12.85 |
12.85 |
A2 Zone |
6752W3 |
212.5 |
220.0 |
7.5 |
4.5 |
13.87 |
13.87 |
A2 Zone |
6752W4 |
265.7 |
272.9 |
7.2 |
3.5 |
34.31 |
32.32 |
A2 Zone |
6762W1 |
249.4 |
259.6 |
10.2 |
3.9 |
9.10 |
9.10 |
A2 Zone |
6752W2 |
172.5 |
176.0 |
3.5 |
- |
14.20 |
14.20 |
Footwall |
6752W2 |
188.0 |
192.5 |
4.5 |
- |
34.09 |
34.09 |
Footwall |
6752W4 |
283.4 |
287.2 |
3.8 |
- |
4.41 |
4.41 |
Footwall |
6762W1 |
271.5 |
280.0 |
8.5 |
- |
3.19 |
3.19 |
Footwall |
6762W1 |
294.4 |
303.5 |
9.1 |
- |
20.11 |
18.54 |
Footwall |
6762W2 |
325.5 |
341.5 |
16.0 |
- |
13.37 |
12.98 |
Footwall |
6762W3 |
306.1 |
316.3 |
10.2 |
- |
8.78 |
8.78 |
Footwall |
6762W3 |
327.1 |
331.6 |
4.5 |
- |
7.30 |
7.30 |
Footwall |
* Metallic Sieve Analysis Pending |
|
|
|
Assays
Hole No. |
From(m) |
To(m) |
CoreLength (m) |
Grade(g/t Au) |
Cut Grade(90 g/t Au) |
NameZone |
6742W11 |
358.0 |
359.5 |
1.5 |
0.12 |
0.12 |
A1 Zone |
6742W11 |
359.5 |
360.7 |
1.2 |
15 |
15 |
A1 Zone |
6742W11 |
360.7 |
362.2 |
1.5 |
0.54 |
0.54 |
A1 Zone |
|
|
|
|
|
|
|
6752 |
762.2 |
763.0 |
0.8 |
9.43 |
9.43 |
A1 Zone |
6752 |
763.0 |
763.8 |
0.8 |
7.14 |
7.14 |
A1 Zone |
6752 |
763.8 |
764.6 |
0.8 |
7.97 |
7.97 |
A1 Zone |
6752 |
764.6 |
765.6 |
1.0 |
106.50 |
90.00 |
A1 Zone |
6752 |
765.6 |
766.6 |
1.0 |
0.38 |
0.38 |
A1 Zone |
6752 |
766.6 |
767.6 |
1.0 |
0.39 |
0.39 |
A1 Zone |
6752 |
767.6 |
768.6 |
1.0 |
0.43 |
0.43 |
A1 Zone |
6752 |
768.6 |
769.9 |
1.3 |
7.36 |
7.36 |
A1 Zone |
|
|
|
|
|
|
|
6752W1 |
300.4 |
301.4 |
1.0 |
2.71 |
2.71 |
A1 Zone |
6752W1 |
301.4 |
302.4 |
1.0 |
1.14 |
1.14 |
A1 Zone |
6752W1 |
302.4 |
303.4 |
1.0 |
20.6 |
20.6 |
A1 Zone |
6752W1 |
303.4 |
304.4 |
1.0 |
3.73 |
3.73 |
A1 Zone |
6752W1 |
304.4 |
305.4 |
1.0 |
47.8 |
47.8 |
A1 Zone |
6752W1 |
305.4 |
306.4 |
1.0 |
0.49 |
0.49 |
A1 Zone |
6752W1 |
306.4 |
307.4 |
1.0 |
0.26 |
0.26 |
A1 Zone |
6752W1 |
307.4 |
308.7 |
1.3 |
0.75 |
0.75 |
A1 Zone |
6752W1 |
308.7 |
309.7 |
1.1 |
59.2 |
59.2 |
A1 Zone |
6752W1 |
309.7 |
310.5 |
0.8 |
6.73 |
6.73 |
A1 Zone |
|
|
|
|
|
|
|
6752W2 |
158.5 |
159.0 |
0.5 |
4.91 |
4.91 |
A2 Zone |
6752W2 |
159.0 |
160.0 |
1.0 |
4.52 |
4.52 |
A2 Zone |
6752W2 |
160.0 |
161.0 |
1.0 |
12.40 |
12.40 |
A2 Zone |
6752W2 |
161.0 |
162.0 |
1.0 |
50.10 |
50.10 |
A2 Zone |
6752W2 |
162.0 |
162.5 |
0.5 |
2.38 |
2.38 |
A2 Zone |
6752W2 |
162.5 |
164.2 |
1.7 |
1.52 |
1.52 |
A2 Zone |
|
|
|
|
|
|
|
6752W2 |
172.5 |
173.5 |
1.0 |
47.90 |
47.90 |
Footwall |
6752W2 |
173.5 |
174.5 |
1.0 |
1.66 |
1.66 |
Footwall |
6752W2 |
174.5 |
176.0 |
1.5 |
0.10 |
0.10 |
Footwall |
|
|
|
|
|
|
|
6752W2 |
188.0 |
189.5 |
1.5 |
51.90 |
51.90 |
Footwall |
6752W2 |
189.5 |
191.0 |
1.5 |
49.30 |
49.30 |
Footwall |
6752W2 |
191.0 |
192.5 |
1.5 |
1.06 |
1.06 |
Footwall |
|
|
|
|
|
|
|
6752W3 |
212.5 |
213.5 |
1.0 |
6.70 |
6.70 |
A1 Zone |
6752W3 |
213.5 |
214.5 |
1.0 |
13.10 |
13.10 |
A1 Zone |
6752W3 |
214.5 |
215.6 |
1.1 |
61.50 |
61.50 |
A1 Zone |
6752W3 |
215.6 |
217.0 |
1.4 |
9.25 |
9.25 |
A1 Zone |
6752W3 |
217.0 |
218.0 |
1.0 |
0.57 |
0.57 |
A1 Zone |
6752W3 |
218.0 |
219.0 |
1.0 |
0.38 |
0.38 |
A1 Zone |
6752W3 |
219.0 |
220.0 |
1.0 |
2.65 |
2.65 |
A1 Zone |
|
|
|
|
|
|
|
6752W4 |
239.0 |
240.5 |
1.5 |
2.23 |
2.23 |
A1 Zone |
6752W4 |
240.5 |
242.0 |
1.5 |
28.80 |
28.80 |
A1 Zone |
6752W4 |
242.0 |
243.5 |
1.5 |
0.03 |
0.03 |
A1 Zone |
|
|
|
|
|
|
|
6752W4 |
265.7 |
266.3 |
0.6 |
2.85 |
2.85 |
A2 Zone |
6752W4 |
266.3 |
266.9 |
0.6 |
12.75 |
12.75 |
A2 Zone |
6752W4 |
266.9 |
267.9 |
1.0 |
100.50 |
90.00 |
A2 Zone |
6752W4 |
267.9 |
268.9 |
1.0 |
28.40 |
28.40 |
A2 Zone |
6752W4 |
268.9 |
269.9 |
1.0 |
1.42 |
1.42 |
A2 Zone |
6752W4 |
269.9 |
270.9 |
1.0 |
76.20 |
76.20 |
A2 Zone |
6752W4 |
270.9 |
271.9 |
1.0 |
6.50 |
6.50 |
A2 Zone |
6752W4 |
271.9 |
272.9 |
1.0 |
2.71 |
2.71 |
A2 Zone |
|
|
|
|
|
|
|
6752W4 |
283.4 |
284.4 |
1.0 |
1.11 |
1.11 |
Footwall |
6752W4 |
284.4 |
285.4 |
1.0 |
7.53 |
7.53 |
Footwall |
6752W4 |
285.4 |
286.4 |
1.0 |
6.62 |
6.62 |
Footwall |
6752W4 |
286.4 |
287.2 |
0.8 |
1.87 |
1.87 |
Footwall |
|
|
|
|
|
|
|
6755W1 |
231.0 |
232.5 |
1.5 |
16.70 |
16.70 |
A Zone |
6755W1 |
232.5 |
234.0 |
1.5 |
0.20 |
0.20 |
A Zone |
6755W1 |
234.0 |
235.0 |
1.0 |
0.02 |
0.02 |
A Zone |
6755W1 |
235.0 |
235.9 |
0.9 |
0.75 |
0.75 |
A Zone |
|
|
|
|
|
|
|
6759 |
70.0 |
71.0 |
1.0 |
1.48 |
1.48 |
A Zone |
6759 |
71.0 |
72.0 |
1.0 |
17.55 |
17.55 |
A Zone |
6759 |
72.0 |
73.3 |
1.3 |
8.58 |
8.58 |
A Zone |
6759 |
73.3 |
74.3 |
1.0 |
1.86 |
1.86 |
A Zone |
|
|
|
|
|
|
|
6762 |
444.6 |
445.6 |
1.0 |
863.00 |
90.00 |
A Zone |
6762 |
445.6 |
446.5 |
0.9 |
89.40 |
89.40 |
A Zone |
6762 |
446.5 |
447.5 |
1.0 |
2.45 |
2.45 |
A Zone |
6762 |
447.5 |
448.5 |
1.0 |
2.62 |
2.62 |
A Zone |
6762 |
448.5 |
449.5 |
1.0 |
1.12 |
1.12 |
A Zone |
6762 |
449.5 |
450.5 |
1.0 |
2.94 |
2.94 |
A Zone |
6762 |
450.5 |
451.3 |
0.8 |
1.30 |
1.30 |
A Zone |
6762 |
451.3 |
452.0 |
0.7 |
34.10 |
34.10 |
A Zone |
|
|
|
|
|
|
|
6762 |
458.0 |
459.0 |
1.0 |
4.52 |
4.52 |
A1 Zone |
6762 |
459.0 |
460.0 |
1.0 |
0.01 |
0.01 |
A1 Zone |
6762 |
460.0 |
461.0 |
1.0 |
0.03 |
0.03 |
A1 Zone |
6762 |
461.0 |
462.0 |
1.0 |
0.16 |
0.16 |
A1 Zone |
6762 |
462.0 |
463.0 |
1.0 |
0.02 |
0.02 |
A1 Zone |
6762 |
463.0 |
464.0 |
1.0 |
16.60 |
16.60 |
A1 Zone |
6762 |
464.0 |
465.1 |
1.1 |
1010.00 |
90.00 |
A1 Zone |
6762 |
465.1 |
466.0 |
0.9 |
3.84 |
3.84 |
A1 Zone |
|
|
|
|
|
|
|
6762W1 |
214.2 |
215.4 |
1.2 |
24.20 |
24.20 |
A1 Zone |
6762W1 |
215.4 |
216.3 |
0.9 |
0.05 |
0.05 |
A1 Zone |
6762W1 |
216.3 |
217.2 |
0.9 |
0.23 |
0.23 |
A1 Zone |
6762W1 |
217.2 |
218.1 |
0.9 |
0.06 |
0.06 |
A1 Zone |
6762W1 |
218.1 |
219.2 |
1.1 |
0.27 |
0.27 |
A1 Zone |
6762W1 |
219.2 |
220.4 |
1.2 |
0.87 |
0.87 |
A1 Zone |
6762W1 |
220.4 |
221.6 |
1.2 |
1.58 |
1.58 |
A1 Zone |
6762W1 |
221.6 |
222.8 |
1.2 |
1.47 |
1.47 |
A1 Zone |
6762W1 |
222.8 |
224.0 |
1.2 |
2.89 |
2.89 |
A1 Zone |
6762W1 |
224.0 |
225.2 |
1.2 |
6.44 |
6.44 |
A1 Zone |
|
|
|
|
|
|
|
6762W1 |
249.4 |
250.4 |
1.0 |
70.60 |
70.60 |
A2 Zone |
6762W1 |
250.4 |
251.4 |
1.0 |
6.48 |
6.48 |
A2 Zone |
6762W1 |
251.4 |
252.4 |
1.0 |
3.06 |
3.06 |
A2 Zone |
6762W1 |
252.4 |
253.6 |
1.2 |
2.04 |
2.04 |
A2 Zone |
6762W1 |
253.6 |
254.8 |
1.2 |
1.06 |
1.06 |
A2 Zone |
6762W1 |
254.8 |
256.0 |
1.2 |
0.82 |
0.82 |
A2 Zone |
6762W1 |
256.0 |
257.2 |
1.2 |
0.22 |
0.22 |
A2 Zone |
6762W1 |
257.2 |
258.4 |
1.2 |
0.09 |
0.09 |
A2 Zone |
6762W1 |
258.4 |
259.6 |
1.2 |
6.30 |
6.30 |
A2 Zone |
|
|
|
|
|
|
|
6762W1 |
271.6 |
272.6 |
1.0 |
7.32 |
7.32 |
Footwall |
6762W1 |
272.6 |
273.8 |
1.2 |
4.54 |
4.54 |
Footwall |
6762W1 |
273.8 |
275.0 |
1.2 |
1.78 |
1.78 |
Footwall |
6762W1 |
275.0 |
276.4 |
1.4 |
0.59 |
0.59 |
Footwall |
6762W1 |
276.4 |
277.6 |
1.2 |
1.43 |
1.43 |
Footwall |
6762W1 |
277.6 |
278.8 |
1.2 |
4.13 |
4.13 |
Footwall |
6762W1 |
278.8 |
280.0 |
1.2 |
3.91 |
3.91 |
Footwall |
|
|
|
|
|
|
|
6762W1 |
294.4 |
295.6 |
1.2 |
5.82 |
5.82 |
Footwall |
6762W1 |
295.6 |
296.5 |
0.9 |
5.05 |
5.05 |
Footwall |
6762W1 |
296.5 |
297.4 |
0.9 |
4.16 |
4.16 |
Footwall |
6762W1 |
297.4 |
298.6 |
1.2 |
1.10 |
1.10 |
Footwall |
6762W1 |
298.6 |
299.7 |
1.1 |
2.89 |
2.89 |
Footwall |
6762W1 |
299.7 |
300.8 |
1.1 |
4.62 |
4.62 |
Footwall |
6762W1 |
300.8 |
302.2 |
1.4 |
19.20 |
19.20 |
Footwall |
6762W1 |
302.2 |
303.5 |
1.3 |
101.00 |
90.00 |
Footwall |
|
|
|
|
|
|
|
6762W2 |
325.5 |
326.5 |
1.0 |
19.75 |
19.75 |
A2 Zone |
6762W2 |
326.5 |
327.5 |
1.0 |
1.65 |
1.65 |
A2 Zone |
6762W2 |
327.5 |
328.5 |
1.0 |
0.49 |
0.49 |
A2 Zone |
6762W2 |
328.5 |
329.5 |
1.0 |
9.07 |
9.07 |
A2 Zone |
6762W2 |
329.5 |
330.5 |
1.0 |
11.30 |
11.30 |
A2 Zone |
6762W2 |
330.5 |
331.5 |
1.0 |
0.64 |
0.64 |
A2 Zone |
6762W2 |
331.5 |
332.5 |
1.0 |
0.27 |
0.27 |
A2 Zone |
6762W2 |
332.5 |
333.5 |
1.0 |
0.01 |
0.01 |
A2 Zone |
6762W2 |
333.5 |
334.5 |
1.0 |
0.03 |
0.03 |
A2 Zone |
6762W2 |
334.5 |
335.5 |
1.0 |
0.06 |
0.06 |
A2 Zone |
6762W2 |
335.5 |
336.5 |
1.0 |
0.18 |
0.18 |
A2 Zone |
6762W2 |
336.5 |
337.5 |
1.0 |
66.80 |
66.80 |
A2 Zone |
6762W2 |
337.5 |
338.5 |
1.0 |
96.20 |
90.00 |
A2 Zone |
6762W2 |
338.5 |
339.5 |
1.0 |
0.86 |
0.86 |
A2 Zone |
6762W2 |
339.5 |
340.5 |
1.0 |
0.04 |
0.04 |
A2 Zone |
6762W2 |
340.5 |
341.5 |
1.0 |
6.49 |
6.49 |
A2 Zone |
|
|
|
|
|
|
|
6762W3 |
222.4 |
223.6 |
1.2 |
6.55 |
6.55 |
A1 Zone |
6762W3 |
223.6 |
224.8 |
1.2 |
0.57 |
0.57 |
A1 Zone |
6762W3 |
224.8 |
226.0 |
1.2 |
1.84 |
1.84 |
A1 Zone |
6762W3 |
226.0 |
227.2 |
1.2 |
13.85 |
13.85 |
A1 Zone |
6762W3 |
227.2 |
228.4 |
1.2 |
4.47 |
4.47 |
A1 Zone |
6762W3 |
228.4 |
229.6 |
1.2 |
12.80 |
12.80 |
A1 Zone |
6762W3 |
229.6 |
230.8 |
1.2 |
13.05 |
13.05 |
A1 Zone |
6762W3 |
230.8 |
232.0 |
1.2 |
45.60 |
45.60 |
A1 Zone |
6762W3 |
232.0 |
233.2 |
1.2 |
7.28 |
7.28 |
A1 Zone |
6762W3 |
233.2 |
234.4 |
1.2 |
2.30 |
2.30 |
A1 Zone |
6762W3 |
234.4 |
235.6 |
1.2 |
5.89 |
5.89 |
A1 Zone |
6762W3 |
235.6 |
236.8 |
1.2 |
0.73 |
0.73 |
A1 Zone |
6762W3 |
236.8 |
238.0 |
1.2 |
0.87 |
0.87 |
A1 Zone |
6762W3 |
238.0 |
239.2 |
1.2 |
1.70 |
1.70 |
A1 Zone |
6762W3 |
239.2 |
240.4 |
1.2 |
0.74 |
0.74 |
A1 Zone |
6762W3 |
240.4 |
241.6 |
1.2 |
14.65 |
14.65 |
A1 Zone |
6762W3 |
241.6 |
242.8 |
1.2 |
4.89 |
4.89 |
A1 Zone |
|
|
|
|
|
|
|
6762W3 |
306.1 |
307.6 |
1.5 |
18.50 |
18.50 |
Footwall |
6762W3 |
307.6 |
308.3 |
0.7 |
2.30 |
2.30 |
Footwall |
6762W3 |
308.3 |
310.1 |
1.8 |
0.16 |
0.16 |
Footwall |
6762W3 |
310.1 |
310.9 |
0.8 |
0.26 |
0.26 |
Footwall |
6762W3 |
310.9 |
311.8 |
0.9 |
0.05 |
0.05 |
Footwall |
6762W3 |
311.8 |
313.1 |
1.3 |
10.50 |
10.50 |
Footwall |
6762W3 |
313.1 |
314.5 |
1.4 |
24.50 |
24.50 |
Footwall |
6762W3 |
314.5 |
315.5 |
1.0 |
0.49 |
0.49 |
Footwall |
6762W3 |
315.5 |
316.3 |
0.8 |
13.00 |
13.00 |
Footwall |
|
|
|
|
|
|
|
6762W3 |
327.1 |
328.6 |
1.5 |
20.20 |
20.20 |
Footwall |
6762W3 |
328.6 |
330.1 |
1.5 |
0.85 |
0.85 |
Footwall |
6762W3 |
330.1 |
331.6 |
1.5 |
0.85 |
0.85 |
Footwall |
|
|
|
|
|
|
|
6767 |
71.0 |
72.5 |
1.5 |
2.51 |
2.51 |
A Zone |
6767 |
72.5 |
74.0 |
1.5 |
55.10 |
55.10 |
A Zone |
6767 |
74.0 |
75.5 |
1.5 |
1.03 |
1.03 |
A Zone |
|
|
|
|
|
|
|
6759 |
70.0 |
71.0 |
1.0 |
1.48 |
1.48 |
A Zone |
6759 |
71.0 |
72.0 |
1.0 |
17.55 |
17.55 |
A Zone |
6759 |
72.0 |
73.3 |
1.3 |
8.58 |
8.58 |
A Zone |
6759 |
73.3 |
74.3 |
1.0 |
1.86 |
1.86 |
A Zone |
|
|
|
|
|
|
|
6785 |
372.3 |
373.3 |
1.0 |
23.40 |
23.40 |
A1 Zone |
6785 |
373.3 |
374.3 |
1.0 |
0.04 |
0.04 |
A1 Zone |
6785 |
374.3 |
375.3 |
1.0 |
0.11 |
0.11 |
A1 Zone |
6785 |
375.3 |
376.3 |
1.0 |
0.30 |
0.30 |
A1 Zone |
6785 |
376.3 |
377.3 |
1.0 |
1.72 |
1.72 |
A1 Zone |
|
|
|
|
|
|
|
6785W1 |
186.2 |
187.7 |
1.5 |
28.10 |
28.10 |
A Zone |
6785W1 |
187.7 |
189.2 |
1.5 |
0.10 |
0.10 |
A Zone |
6785W1 |
189.2 |
190.7 |
1.5 |
0.72 |
0.72 |
A Zone |
6785W1 |
190.7 |
192.2 |
1.5 |
1.80 |
1.80 |
A Zone |
6785W1 |
192.2 |
193.7 |
1.5 |
1.38 |
1.38 |
A Zone |
* Metallic Sieve Analysis Pending |
|
|
Table 2: Kiena Complex Surface Drilling Assay and
Composite Results
Assays
Hole No. |
From (m) |
To (m) |
Length(m) |
Grade(g/t Au) |
Capped Grade(90 g/t Au) |
Zone |
Presqu'ile |
PR-20-001 |
193.80 |
194.30 |
0.50 |
1515.00 |
90.00 |
|
237.85 |
240.00 |
2.15 |
23.10 |
23.10 |
Zone 2A |
388.50 |
389.00 |
0.50 |
61.20 |
61.20 |
|
PR-20-002 |
257.00 |
258.00 |
1.00 |
0.84 |
0.84 |
Zone 1 |
300.30 |
300.80 |
0.50 |
9.64 |
9.64 |
|
PR-20-003 |
281.40 |
281.90 |
0.50 |
35.10 |
35.10 |
Zone 1 |
299.20 |
302.30 |
3.10 |
2.32 |
2.32 |
Zone 2 |
PR-20-004 |
323.75 |
324.50 |
0.75 |
3.29 |
3.29 |
Zone 2 |
PR-20-005 |
346.80 |
349.00 |
2.20 |
1.13 |
1.13 |
Zone 2 |
PR-21-006 |
370.70 |
374.20 |
3.50 |
0.38 |
0.38 |
Zone 2 |
PR-21-007 |
399.00 |
402.90 |
3.90 |
0.24 |
0.24 |
Zone 2 |
PR-21-008 |
286.00 |
287.20 |
1.20 |
6.13 |
6.13 |
Zone 2A |
311.50 |
312.40 |
0.90 |
63.90 |
63.90 |
Zone 2 |
PR-21-009 |
334.00 |
336.00 |
2.00 |
20.90 |
20.90 |
Zone 2 |
PR-21-010 |
195.80 |
198.00 |
2.20 |
15.26 |
15.26 |
Zone 2A |
PR-21-011 |
No significant results |
PR-21-012 |
46.50 |
52.50 |
6.00 |
1.29 |
1.29 |
|
PR-21-013 |
No significant results |
Shawkey area |
SW-20-001 |
226.70 |
227.70 |
1.00 |
3.85 |
3.85 |
Bourgo |
SW-20-002 |
220.00 |
227.00 |
7.00 |
2.19 |
2.19 |
Bourgo |
SW-20-003 |
189.00 |
190.30 |
1.30 |
5.72 |
5.72 |
|
217.80 |
221.10 |
3.30 |
1.43 |
1.43 |
Bourgo |
SW-20-004 |
224.00 |
226.00 |
2.00 |
2.80 |
2.80 |
Bourgo |
SW-20-005 |
171.55 |
177.00 |
5.45 |
4.82 |
4.82 |
New area |
332.50 |
333.00 |
0.50 |
18.35 |
18.35 |
New area |
SW-20-006 |
784.50 |
785.00 |
0.50 |
8.67 |
8.67 |
New area |
799.60 |
804.80 |
5.20 |
1.33 |
1.33 |
New area |
SW-20-007 |
226.70 |
231.50 |
4.80 |
2.05 |
2.05 |
|
251.70 |
252.20 |
0.50 |
27.10 |
27.10 |
Bourgo |
SW-21-008 |
159.00 |
160.50 |
1.50 |
20.60 |
20.60 |
|
SW-21-009 |
272.70 |
273.50 |
0.80 |
9.21 |
9.21 |
|
282.80 |
283.50 |
0.70 |
18.60 |
18.60 |
Bourgo |
502.50 |
504.00 |
1.50 |
17.45 |
17.45 |
|
513.00 |
514.50 |
1.50 |
20.80 |
20.80 |
|
562.80 |
563.30 |
0.50 |
56.80 |
56.80 |
|
SW-21-010 |
408.00 |
409.50 |
1.50 |
11.45 |
11.45 |
New area |
SW-21-011 |
429.50 |
431.00 |
1.50 |
5.17 |
5.17 |
|
SW-21-012 |
19.50 |
21.00 |
1.50 |
7.91 |
7.91 |
|
308.00 |
312.00 |
4.00 |
5.03 |
5.03 |
New area |
SW-21-013 |
109.20 |
110.30 |
1.10 |
29.40 |
29.40 |
Bourgo |
191.30 |
191.80 |
0.50 |
5.27 |
5.27 |
|
227.30 |
228.80 |
1.50 |
5.16 |
5.16 |
|
SW-21-014 |
194.00 |
195.90 |
1.90 |
4.49 |
4.49 |
Bourgo |
PDF
available: http://ml.globenewswire.com/Resource/Download/736587a2-bdac-4c0f-8777-79461bbb780c
Wesdome Gold Mines (TSX:WDO)
Graphique Historique de l'Action
De Mar 2024 à Avr 2024
Wesdome Gold Mines (TSX:WDO)
Graphique Historique de l'Action
De Avr 2023 à Avr 2024