Cypress Development Corp. / Cypress Development Corp. : Cypress Drills 175 feet of 12% Zinc and 121 g/t Silver at Gunman Project in Nevada . Processed and transmitted by NASDAQ OMX Corporate Solutions. The issuer is solely responsible for the content of this announcement.

Suite 1610 - 777 Dunsmuir Street, Vancouver, BC, Canada, V7Y 1K4
www.cypressdevelopmentcorp.com

TSX-V Trading Symbol: CYPEmail: info@cypressdevelopmentcorp.com June 12, 2014 

Vancouver, BC - Cypress Development Corp. (TSX-V: CYP) (OTC Pink: CYDVF) (Frankfurt: C1Z) ("Cypress" or the "Company") is pleased to announce results of a drill program completed as part of the 2014 Phase 1 exploration program at its 100% owned Gunman zinc-silver oxide project in Nevada. The 1140 acre Gunman zinc-silver project is located directly west of Barrick's BaldMountain gold mine complex on the southern Carlin mineral trend in White Pine County, Nevada.

Gunman Project Southern Carlin Trend location map:
http://www.cypressdevelopmentcorp.com/s/Image.asp?i=Maps/Gunman-43-101.jpg

Thirteen reverse circulation (RC) drill holes were completed at the Gunman zinc-silver-copper project in eastern White Pine County, Nevada. The drilling program totaled 3520 feet and was directed at three targets areas located in the central portion of the property. 

2014 Gunman Project drill hole location map:
http://www.cypressdevelopmentcorp.com/s/Image.asp?i=Maps/Gunman-May-2014-RC-Plan-Map.jpg

Gunman Project zone target map:
http://www.cypressdevelopmentcorp.com/s/Image.asp?i=Maps/Phase-1-Rock-Assays.jpg

RH Zone Results
Infill and confirmation drilling within the RH Zone intersected long intervals of strong dolomitic alteration containing abundant gossanous iron oxide zones. Assays from five foot interval samples within the oxide zone and adjacent fractured dolomitized limestone show spectacular zinc and silver mineralization. The assays from the drilling within the RH Zone are summarized in table 1 below.

Table 1:  RH Zone Zinc and Silver Assay Results

Hole ID From (ft) To (ft) Interval (ft) Ag (g/t) Zn (%)
GMRC-3 55 95 40 60.3 2.00
and 140 155 15 33.5 3.20
GMRC-4 20 175 155 128.0 7.20
including 125 175 50 87.7 17.09
including 135 150 15 83.9 30.64
GMRC-5 5 205 200 63.3 8.90
including 125 180 55 147.0 21.00
including 150 165 15 100.1 32.20
GMRC-8 130 185 55 54.3 6.50
GMRC-9 50 225 175 121.0 12.00
including 130 215 85 209.2 19.70
GMRC-10 55 80 25 24.2 4.60
and 105 120 15 8.0 1.70
and 140 155 15 5.9 1.20
and 170 220 50 20.3 8.70
GMRC-11 0 150 150 18.3 3.10
and 165 215 50 125.6 7.90

* All intervals above were computed from Chemex assay results of representative, 5 foot interval samples collected from the reverse circulation sample return.  All intervals have been selected based on a 1% zinc lower cut-off.  The intervals above are restricted to contain no more than one included interval that falls below the 1% zinc lower cut-off.  No high grade cut has been applied.  All samples were continuously collected from each 5 foot interval during drilling.  The samples are large and average approximately 6 kilograms in weight.
* g/t = grams per metric tonne.
* The true width lengths are estimated to be approximately 65%-75% of down hole intervals. 

As the table above indicates, zinc and silver mineralization occurs both as long, highly variable but completely continuous mineralized down hole intervals (Hole GMRC-9 for example) as well as holes with shorter intervals of strong mineralization separated by lower grade intervals (Hole GMRC-10 for example). 

Note that, as Table 2 below indicates, for hole GMRC-9, the entire 175 foot down hole interval that grades 121.0 g/t silver and 12.00% zinc does not contain a single interval grading less than 1% zinc.

Table 2:  Complete 5 Foot Interval Assays for a portion of Hole GMRC-9

Hole ID From(ft) To(ft) sample weight (kg) Ag g/t Zn %
GMRC-9 50 55 4.12 26.1 5.19
GMRC-9 55 60 9.86 9.3 3.17
GMRC-9 60 65 9.44 16.9 2.65
GMRC-9 65 70 11.40 13.3 5.92
GMRC-9 70 75 8.54 13.6 2.09
GMRC-9 75 80 9.76 16.7 3.51
GMRC-9 80 85 4.24 45.5 6.40
GMRC-9 85 90 9.34 33.9 6.42
GMRC-9 90 95 8.04 31.0 3.76
GMRC-9 95 100 16.08 20.4 1.84
GMRC-9 100 105 7.30 82.8 8.49
GMRC-9 105 110 13.60 35.0 3.20
GMRC-9 110 115 5.50 45.3 7.19
GMRC-9 115 120 7.52 63.2 9.29
GMRC-9 120 125 5.04 30.1 2.51
GMRC-9 125 130 10.02 124.0 9.03
GMRC-9 130 135 5.04 154.0 22.10
GMRC-9 135 140 8.34 146.0 25.60
GMRC-9 140 145 5.52 299.0 36.30
GMRC-9 145 150 9.42 156.0 27.90
GMRC-9 150 155 3.52 92.7 16.80
GMRC-9 155 160 11.14 54.3 3.91
GMRC-9 160 165 5.90 70.4 3.37
GMRC-9 165 170 9.26 143.0 5.93
GMRC-9 170 175 6.04 327.0 14.85
GMRC-9 175 180 8.30 371.0 15.55
GMRC-9 180 185 4.26 345.0 22.30
GMRC-9 185 190 9.46 192.0 16.90
GMRC-9 190 195 5.18 272.0 24.10
GMRC-9 195 200 7.42 379.0 27.90
GMRC-9 200 205 4.32 276.0 22.80
GMRC-9 205 210 10.30 231.0 33.21
GMRC-9 210 215 6.12 49.1 15.45
GMRC-9 215 220 9.44 50.3 2.91
GMRC-9 220 225 4.18 24.8 1.09

* Detailed Notes on Chemex Assay Procedures Used:  A basic aqua regia-ICP multi-element package was run on 50 gram splits from 250 gram master pulps.  Intervals assaying >100 grams/tonne silver and/or 1% zinc were rerun using a complete aqua regia digestion followed by ICP-AES analysis.  Intervals assaying greater than 30% zinc following complete aqua regia digestion were then re-assayed from a fresh 50 gram pulp using classical titration methods.

RH Zone Geologic Discussion
Evidence from both drilling and surface exposures of the RH Zone strongly suggests that the mineralization is structurally controlled and is focused within an envelope of hydrothermally altered, fractured and brecciated dolomite.  Outcrop and drill data also indicate that the dolomite is of hydrothermal origin. 

Data gathered during the 2014 Phase 1 drill program points strongly to base metal, precious metal veining within a focused zone of dolomite alteration, fracturing and brecciation forming within an active zone of faulting.  Subsequent oxidation of the original poly metallic veining mineralization has produced significant down hole intervals of spectacular, silver rich, zinc and iron oxide gossans with local sulfide cast boxworks.

RH North Target Results and Geologic Discussion
Four holes were completed in the grass roots exploration stage RH North target area in the Phase 1 2014 program.  Three of the holes were completed on 90 to 300 foot step outs from the RH North discovery hole GD-15, which was completed in 2007.  Hole GMRC-2 intersected an 80 foot wide interval of low grade zinc and silver mineralization.  A five foot interval within the low grade intersection returned 1.28% zinc and 6.6 g/t silver. Hole GMRC-2 assays show that the hole was still in low grade mineralization with the last assay interval from 295 to 300 feet returning 7.1 g/t silver and 0.29% zinc.

The exploration of the RH North target area remains at a reconnaissance stage as only seven holes have been completed to date. Low grade (<1% zinc and 10 g/t silver) mineralization has been encountered in two of the seven holes.  Both of the broadly mineralized holes also contain narrow intervals of zinc mineralization of >1%. The host rocks at the RH North target area are very similar to those at the RH Zone, located 1500 feet to the south.   

Results to date indicate significant down hole intervals of mineralization in both oxidized and reduced limestone is present in the target area.  This setting is considered highly favorable for the presence of much higher grade mineralization.  Geologic compilation of results is underway in an effort to identify additional drill targets at the RH North target area.

Far North Target Area Surface Sampling Results Interpretation
As has been recently reported, Cypress completed a reconnaissance surface rock chip sampling program in the far northern portion of the Gunman project early on in the Phase 1 2014 exploration. The assay results of the sampling have been previously reported (see news release June 4, 2014).

Two important results from the ICP assays of these samples are:

1.            A sample of bleached, weathered float collected in a dry stream bed 2000 feet east of the Gunman property boundary assayed 22350 ppm zinc or 2.235% zinc. The stream bed drains from an area of hills within the Far North Target area on the Gunman property.

2.            A cluster of outcrop samples of silicified and strongly oxidized limestone conglomerate contain highly anomalous zinc, arsenic and mercury. Scattered bismuth anomalies also occur in samples from the anomaly area. This anomaly cluster lies in the Far North Target area and is hosted by the limestone conglomerate unit which caps the strongly mineralized sandy dolomite and limestone in the RH area.

The results show strong evidence for the continuation of the known, structurally controlled mineralization at Gunman.  The outcropping silicified and geochemically anomalous carbonates are located approximately 6000 feet north of the RH Zone.  No previous exploration or drilling is known to have been conducted in this area.

A strong case for a structural connection between the RH Zone and the Far North anomaly area can be made from strong, linear features seen in contoured topographic data as well as in detailed digital elevation data.  The host rock for the anomaly area is definitely the limestone conglomerate that stratigraphically overlies the high grade mineralization at the RH Zone.

These results are very encouraging as they point to a large extension of the known mineralized system at Gunman which now stretches from the Far South Zone, north through the RH South, RH and RH North zones and then further north to the new Far North target area, a total indicated strike length of approximately 9000 feet.

TQCU Copper Target Results
Two shallow angle holes from a common collar were added to the Phase 1 program to conduct initial sub surface exploration of a well-developed copper oxide showing located 300 feetwest of the RH Zone.  The copper showing has been explored by historical shallow workings.  Grab samples from one these pits at TQCU returned very high copper assays as was recently reported (see news release June 4, 2014 "Cypress Samples Up to 10% Copper").

The TQCU target is one segment of a 2500 to 3000 foot long zone of outcropping copper oxide mineralization hosted in a distinctive coarse grained sandstone unit.  This copper mineralization flanks the zinc and silver mineralization delineated at the RH and RH South Zones.

Gunman Outcropping Copper Oxide Mineralization:
http://www.cypressdevelopmentcorp.com/s/Image.asp?i=/photos/gunman/pic006.jpg

The two holes intersected strongly oxidized sandstone and underlying limestone.  It is possible a cross fault has offset the mineralization. Detailed sampling and mapping of the copper mineralization is planned to better define drill targets.

Robert Marvin, P.Geo., CPG, Exploration Manager for Cypress Development Corp. is the Qualified Person as defined by National Instrument 43-101 and has supervised both the project field work and the preparation of the technical information in this release.

About Cypress Development Corp.:
Cypress Development Corp. is a diversified precious and base metals exploration and development company with properties in Red Lake, Ontario, Canada, and in Nevada, U.S.A. The Company has approximately $1.1 million in its treasury. 

To find out more about Cypress Development Corp. (TSX-V: CYP), visit our website at www.cypressdevelopmentcorp.com.

ON BEHALF OF THE BOARD OF DIRECTORS

"Don Huston"
                                                           
DONALD C. HUSTON
President

For further information contact myself or:
Don Myers
Director
Cypress Development Corp.
Telephone: 604-687-3376
Toll Free: 800-567-8181
Facsimile: 604-687-3119
Email: info@cypressdevelopmentcorp.com

NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THE CONTENT OF THIS NEWS RELEASE.

This release includes certain statements that may be deemed to be "forward-looking statements". All statements in this release, other than statements of historical facts, that address events or developments that management of the Company expects, are forward-looking statements. Although management believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance, and actual results or developments may differ materially from those in the forward-looking statements. The Company undertakes no obligation to update these forward-looking statements if management's beliefs, estimates or opinions, or other factors, should change. Factors that could cause actual results to differ materially from those in forward-looking statements, include market prices, exploration and development successes, continued availability of capital and financing, and general economic, market or business conditions. Please see the public filings of the Company at www.sedar.com for further information.

 



This announcement is distributed by NASDAQ OMX Corporate Solutions on behalf of NASDAQ OMX Corporate Solutions clients.
The issuer of this announcement warrants that they are solely responsible for the content, accuracy and originality of the information contained therein.
Source: Cypress Development Corp. via Globenewswire

HUG#1792347
Lehman Abs GM (NYSE:CYP)
Graphique Historique de l'Action
De Mai 2024 à Juin 2024 Plus de graphiques de la Bourse Lehman Abs GM
Lehman Abs GM (NYSE:CYP)
Graphique Historique de l'Action
De Juin 2023 à Juin 2024 Plus de graphiques de la Bourse Lehman Abs GM