GoldQuest: Drilling Update at Las Tres Palmas, Dominican Republic

GoldQuest Mining Corp. (TSX VENTURE:GQC)(FRANKFURT:M1W)(BERLIN:M1W) ("GoldQuest"
or the "Company") is pleased to announce assay results from three additional
holes in the Romero gold/copper discovery zone on the Company's 100% owned Las
Tres Palmas trend in the Dominican Republic.


Drilling highlights include:



--  LTP-123 contained 68 metres grading 1.76 g/t gold and 0.29% copper (2.23
    g/t gold equivalent(i)) within a mineralized zone of 138 metres grading
    1.00 g/t gold and 0.20% copper (1.33 g/t gold equivalent) 
--  LTP-124 contained 48 metres grading 1.21 g/t gold and 1.02% copper (2.88
    g/t gold equivalent) 



These are the last results from the phase of drilling targeting the shallow
Induced Polarization ("IP") interpretation that discovered the Romero
Mineralization. Future drilling will be guided by new, ongoing deep geophysical
data. New data collected this year has identified two distinct east-west
trending target zones at Romero. Drilling to date has focused on the Romero
North zone where highlights include LTP-94 which returned 235 metres grading 7.9
g/t gold and 1.4% copper (10.2 g/t gold equivalent). Romero South, a newly
identified trend, is essentially untested and returned a stronger and shallower
chargeability anomaly than Romero North.


"We are pleased by the continued positive drilling results and the confirmation
of our targeting approach," commented Julio Espaillat, GoldQuest's Chief
Executive Officer. "Our geological modeling will assist us in seeking additional
mineralization both at Romero and along the entire Las Tres Palmas trend."


The results from the new holes are summarized in the table below:



---------------------------------------------------------------------------
                From         To   Interval         Au         Cu       AuEq
Hole              (m)        (m)        (m)      (g/t)        (%)   (g/t)(i)
---------------------------------------------------------------------------
LTP - 122     195.24     294.00      98.76       0.41       0.12       0.61
---------------------------------------------------------------------------
LTP - 123     134.00     272.00     138.00       1.00       0.20       1.33
---------------------------------------------------------------------------
Including     172.00     240.00      68.00       1.76       0.29       2.23
---------------------------------------------------------------------------
and           338.00     424.00      86.00       0.28       0.09       0.43
---------------------------------------------------------------------------
LTP - 124     144.00     158.00      14.00       1.14       0.11       1.32
---------------------------------------------------------------------------
and           254.00     302.00      48.00       1.21       1.02       2.88
---------------------------------------------------------------------------

(i) Note: All the results and sub intervals summarized in the table above
have a bottom cut-off of 0.15 g/t of gold. A top cut of 50 g/t gold is used,
however no samples in this release exceeded 50 g/t. The intervals may not
represent true mineralization widths and the exact orientation of the
mineralization at this stage of the drilling is not yet known, although the
host volcanic lithologies are sub-horizontal in orientation. Gold equivalent
values calculated using a 3-year trailing average price of $1616 US/ounce
for gold and $3.85 US/pound of copper as of January 15, 2013. No adjustment
has been made for metallurgical recovery, as these remain uncertain at this
time. Gold Equivalent formula:
AuEq g/t = ((Cu% x 22.0462 x 3.85)/(1616/31.1035)).



Of the three holes released today, LTP-122 tested the area between the Romero
North and South trends. The mineralization extends in a southeast direction
where previous shallow holes left this area unknown. LTP-123 was an infill hole
in Romero North and LTP-124 was drilled at the eastern end of Romero North (see
plan map with Romero Drill locations at:
http://goldquestcorp.com/images/romero-new3_feb2013.jpg (note: IP line 100E will
be surveyed once drills have been deployed elsewhere, as IP survey results would
not be accurate with active drilling in the vicinity)).


Currently, LTP-125 is in the lab and was drilled at the Escandalosa North Zone.
LTP-126 is also in the lab and was drilled at the eastern end of Romero North.
LTP-127 has been collared at Romero North's northern flank which currently
remains open, and is currently drilling. LTP-128 is currently drilling an IP
target at Escandalosa North and LTP-129 is drilling between Romero North and
newly discovered Romero South (see plan map located at:
http://goldquestcorp.com/images/PlanMapEscandalosa4_feb2013.jpg).


The individual two metre assay intervals from all holes on drilled on the Las
Tres Palmas trend are available at:
http://goldquestcorp.com/images/pdf/Assay_Au_Cu_Zn_S_feb2013.pdf, in addition
the collar locations and hole azimuth and dips for all Las Tres Palmas holes can
be reviewed at: http://goldquestcorp.com/images/pdf/LTP_HOLES_FEB20_2013.pdf.


The Company will continue to release new drill hole results in batches as their
analysis is completed. ACME labs have been instructed to release assays to the
company only once the batches have been completed. The potential quantity and
grade is conceptual in nature, there has been insufficient exploration to define
a mineral resource and it is uncertain if further exploration will result in the
target being delineated as a mineral resource.


As part of the Company's Quality Assurance and Quality Control procedures
(QA/QC), most of the high grade intervals are re-assayed and the Company is
awaiting these check samples. In addition, systematic re-assaying of intervals
is in progress, to confirm compliance of blanks and duplicates checks. The
Company also reviews results from Certified Standard Reference materials (CRSM
or Standards), which are inserted at a rate of 5 per 100 samples. Within the
results disclosed herein there were 3 samples, which had results below the
recommended tolerances. The samples in this batch are being re-assayed and the
Company is awaiting the results from these samples. Any future resource
calculations will be calculated from compliant intervals, and if there is any
material variation from the reported intervals on a hole by hole basis, then the
Company will report this in subsequent releases, but it is of the opinion of the
Company that any variations are unlikely to be material.


In GoldQuest's drill programs, composite intervals were chosen using a
combination of geological criteria and mineralization, averaging around 2 metres
core length. The drill core is cut in half with one half of the core sample
shipped to ACME Labs by GoldQuest technicians. The remaining half of the core is
kept at the company core shack for future assay verification, or any other
further investigation. Assays within intervals below the 0.005 g/t detection
limit for Au were given a zero value. All drill samples were prepared and
screened by ACME Labs (Santo Domingo); metallic fire assay and multi-element
ICP-MS were assayed by ACME Analytical Laboratories (Chile). Gold values are
determined by standard fire assay with an AA finish, or, if over 10.0 g/t Au,
were re-assayed and completed with a gravimetric finish. QA/QC included the
insertion and continual monitoring of numerous standards, blanks and duplicates
into the sample stream, at random intervals within each batch. The comprehensive
GoldQuest Quality Assurance and Quality Control protocols can be viewed on
GoldQuest's Website at:
http://goldquestcorp.com/index.php/corporate/corporate-governance.


The information in this press release has been reviewed and approved by Mr.
Jeremy Niemi, P.Geo., the Director, Technical Services of GoldQuest and a
Qualified Person for the technical information in this press release under NI
43-101 standards.


About GoldQuest

GoldQuest is a Canadian based mineral exploration company with projects in the
Dominican Republic traded on the TSX-V under the symbol GQC.V and in
Frankfurt/Berlin with symbol M1W, with 143,980,044 shares outstanding
(154,856,571 on a fully diluted basis).


Forward-looking statements:

This news release contains certain statements that may be deemed
"forward-looking statements", including statements regarding the Company's
expectations and plans for its mineral projects, including its drilling programs
and the IP program. All statements in this release, other than statements of
historical fact, that address events or developments that GoldQuest expects to
occur, are forward- looking statements.


Forward looking statements are statements that are not historical facts and are
generally, but not always, identified by the words "expects", "plans",
"anticipates", "believes", "intends", "estimates", "projects", "potential" and
similar expressions, or that events or conditions "will", "would", "may",
"could" or "should" occur. Although GoldQuest believes the expectations
expressed in such forward-looking statements are based on reasonable
assumptions, such statements are not guarantees of future performance and actual
results may differ materially from those in forward-looking statements. Factors
that could cause the actual results to differ materially from those in
forward-looking statements include exploitation and exploration success,
differing results from re-assays or other analytical procedures with respect to
the drill results, continued availability of capital, financing and required
resources (such as human resources, equipment and/or other capital resources)
and general economic, market or business conditions. Investors are cautioned
that any such statements are not guarantees of future performance and actual
results or developments may differ materially from those projected in the
forward-looking statements. Forward-looking statements are based on the beliefs,
estimates and opinions of GoldQuest's management on the date the statements are
made. GoldQuest undertakes no obligation to update these forward-looking
statements in the event that management's beliefs, estimates or opinions, or
other factors, should change, except as required by law.


FOR FURTHER INFORMATION PLEASE CONTACT: 
GoldQuest Mining Corp.
Julio Espaillat
President & Chief Executive Officer
+1-829-919-8701
jespaillat@goldquestcorp.com


GoldQuest Mining Corp.
Sebastian de Kloet
Investor Relations - Toronto
+1-416-214-9151
investorrelations@goldquestcorp.com
www.goldquestcorp.com
GoldQuest Mining (TSXV:GQC)
Graphique Historique de l'Action
De Mai 2024 à Juin 2024