San Gold Corporation (TSX:SGR)(OTCQX:SGRCF) today announced the
results of drilling conducted between January and October 2011 in
and around the L10 Zone of the company's Rice Lake Mining Complex
in Manitoba, Canada.
The L10 zone continues to demonstrate robust widths and grades
as highlighted by drill hole #H955-11-114, intersecting 27.0
g/tonne over 5.0 metres at a depth of 416 metres and drill hole
#H933-11-018, intersecting 115 g/tonne over 1.0 metre.
These results have expanded the area of known mineralization
associated with the L10 zone to more than 1,000 m (3,300 ft) below
surface, which is roughly equivalent to the depth of the 18 Level
in the nearby Rice Lake Mine. The drilling program has also
extended the strike length of the zone to more than 230 m (750
feet). As well, deeper drilling is demonstrating that these healthy
widths and grades continue further to depth, as highlighted by
drill hole #DX-11-009 intersecting 22.9 g/tonne over 5.4 metres at
569 metres below surface and by drill hole #DX-11-015 intersecting
7.1 g/tonne over 1.6 m at more than one kilometre below
surface.
Numerous other significant intersections were also obtained
outside of the projected limits of the L10 zone, representing
potential new zones or extensions as presented in the plan view of
the 16 Level of the Rice Lake Mine. This level is currently being
utilized as a drill exploration platform but will also become an
access and extraction level for the L10 area in 2012.
"This drilling supports our belief in the vast potential of the
Bissett greenstone belt. It demonstrates robust grades located deep
below the surface, accessible from existing infrastructure in the
nearby Rice Lake Mine, and continues to confirm the geologic model
that has been so successful for finding new gold deposits," said
George Pirie, San Gold's President and Chief Executive Officer.
The drilling results released today cover 93 intercepts over 64
drill holes within the L10 mineralized envelop and projections of
the zone to depth. A full listing of the drill holes carried out in
the L10 Zone can be found in Table 1 of this release. Figures 1 to
5, which illustrate the location of drill holes and intercepts, can
be found on the company web site (www.sangold.ca) and on SEDAR
(www.sedar.com).
2011 Exploration Program
This drilling was carried out as part of San Gold's 2011 drill
program. As of the end of October, the company had completed
300,000 metres of drilling within the Rice Lake Mining Complex. The
Company's near-surface exploration activities in 2011 have focused
on both exploration and definition drilling along the 007 Zone and
within the L10, L13, SG-1 and Cohiba zones. Deep drilling has
focused on extensions of the L10 and 007 zones, both from surface
and from drilling stations on 16 Level and 26 Level in the Rice
Lake Mine. Drilling within the Rice Lake Mine has focused primarily
on definition drilling on 26, 28 and 31 Levels.
This program was carried out under the supervision of Dale Ginn,
P.Geo., the Qualified Person for this project under National
Instrument 43-101. The drill core was split, with half sent to TSL
Laboratories in Saskatoon, SK and fire assayed with an AA and
gravimetric finish. Whole metallic assays were performed on samples
containing visible gold. Check assays were also performed on pulps
and rejects by both TSL and by Accurassay Laboratories of Thunder
Bay, ON. The core lengths are actual lengths as drilled and have
not been adjusted for the true width of the mineralized zones.
About San Gold
San Gold is an established Canadian gold producer, explorer, and
developer that owns and operates the Hinge, 007, and Rice Lake
mines near Bissett, Manitoba. The Company employs more than 400
people and is committed to the highest standards of safety and
environmental stewardship. San Gold is on the Toronto Stock
Exchange under the symbol "SGR" and on the OTCQX under the symbol
"SGRCF".
For further information on San Gold, please visit
www.sangold.ca.
Cautionary Note
No stock exchange, securities commission or other regulatory
authority has approved or disapproved the information contained
herein. This news release includes certain "forward-looking
statements". All statements, other than statements of historical
fact included in this release, including, without limitation,
statements regarding forecast gold production, gold grades,
recoveries, cash operating costs, potential mineralization, mineral
resources, mineral reserves, exploration results, and future plans
and objectives of the Company, are forward-looking statements that
involve various risks and uncertainties. These forward-looking
statements include, but are not limited to, statements with respect
to mining and processing of mined ore, achieving projected recovery
rates, anticipated production rates and mine life, operating
efficiencies, costs and expenditures, changes in mineral resources
and conversion of mineral resources to proven and probable mineral
reserves, and other information that is based on forecasts of
future operational or financial results, estimates of amounts not
yet determinable and assumptions of management.
Any statements that express or involve discussions with respect
to predictions, expectations, beliefs, plans, projections,
objectives, assumptions or future events or performance (often, but
not always, using words or phrases such as "expects" or "does not
expect", "is expected", "anticipates" or "does not anticipate",
"plans", "estimates" or "intends", or stating that certain actions,
events or results "may", "could", "would", "might" or "will" be
taken, occur or be achieved) are not statements of historical fact
and may be "forward-looking statements." Forward-looking statements
are subject to a variety of risks and uncertainties that could
cause actual events or results to differ from those reflected in
the forward-looking statements.
There can be no assurance that forward-looking statements will
prove to be accurate and actual results and future events could
differ materially from those anticipated in such statements.
Important factors that could cause actual results to differ
materially from the Company's expectations include, among others,
the actual results of current exploration activities, conclusions
of economic evaluations and changes in project parameters as plans
continue to be refined as well as future prices of precious metals,
as well as those factors discussed in the section entitled "Other
MD&A Requirements and Additional Disclosure and Risk Factors"
in the Company's most recent quarterly Management's Analysis and
Discussion ("MD&A"). Although the Company has attempted to
identify important factors that could cause actual results to
differ materially, there may be other factors that cause results
not to be as anticipated, estimated or intended. There can be no
assurance that such statements will prove to be accurate as actual
results and future events could differ materially from those
anticipated in such statements. Accordingly, readers should not
place undue reliance on forward-looking statements.
Exploration results that include geophysics, sampling, and drill
results on wide spacings may not be indicative of the occurrence of
a mineral deposit. Such results do not provide assurance that
further work will establish sufficient grade, continuity,
metallurgical characteristics, and economic potential to be classed
as a category of mineral resource. A mineral resource that is
classified as "inferred" or "indicated" has a great amount of
uncertainty as to its existence and economic and legal feasibility.
It cannot be assumed that any or part of an "indicated mineral
resource" or "inferred mineral resource" will ever be upgraded to a
higher category of resource. Investors are cautioned not to assume
that all or any part of mineral deposits in these categories will
ever be converted into proven and probable reserves.
Table 1: Full Listing of L10 Drilling Results (January-October
2011) (1)
----------------------------------------------------------------------------
From To Length Au Depth
Hole (m) (m) (m) (g/tonne) (m)
----------------------------------------------------------------------------
H955-10-093 395.8 398.3 2.4 32.75 465.73
----------------------------------------------------------------------------
and 454.2 461.6 7.4 0.03 512.06
----------------------------------------------------------------------------
H955-11-097 385.9 386.8 0.9 5.86 406.88
----------------------------------------------------------------------------
and 394.5 394.7 0.2 2.71 412.61
----------------------------------------------------------------------------
H955-11-098 380.5 380.8 0.3 3.67 423.73
----------------------------------------------------------------------------
and 399.9 402.4 2.5 8.64 438.27
----------------------------------------------------------------------------
including 399.9 401.4 1.4 13.99
----------------------------------------------------------------------------
H955-11-099 411.2 414.4 3.2 10.80 488.29
----------------------------------------------------------------------------
H955-11-100 379.8 380.8 0.9 2.71 350.22
----------------------------------------------------------------------------
H955-11-101
----------------------------------------------------------------------------
H955-11-102 385.3 386.7 1.5 4.08 389.84
----------------------------------------------------------------------------
and 392.2 394.5 2.3 3.94 394.41
----------------------------------------------------------------------------
H955-11-103 385.9 389.1 3.3 2.67 401.73
----------------------------------------------------------------------------
H955-11-104 395.3 399.0 3.7 3.15 430.07
----------------------------------------------------------------------------
H955-11-105 405.4 408.4 3.1 3.29 453.02
----------------------------------------------------------------------------
including 405.4 406.4 1.1 7.82
----------------------------------------------------------------------------
H955-11-107 378.1 380.8 2.8 8.64 326.08
----------------------------------------------------------------------------
including 380.0 380.8 0.8 29.42
----------------------------------------------------------------------------
and 383.3 384.6 1.2 2.16
----------------------------------------------------------------------------
H955-11-108 383.4 384.8 1.3 5.28 350.00
----------------------------------------------------------------------------
H955-11-109 372.4 389.5 17.1 4.49 358.23
----------------------------------------------------------------------------
including 372.4 375.5 3.0 13.99
----------------------------------------------------------------------------
including 382.6 389.5 7.0 4.39
----------------------------------------------------------------------------
H955-11-110 386.4 389.5 3.1 4.59 385.94
----------------------------------------------------------------------------
H955-11-111 387.6 390.7 3.1 8.23 390.45
----------------------------------------------------------------------------
H955-11-112 390.5 391.8 1.3 0.99 408.37
----------------------------------------------------------------------------
H955-11-113 385.7 386.9 1.2 7.51 414.65
----------------------------------------------------------------------------
H955-11-114 385.6 390.5 5.0 26.99 416.36
----------------------------------------------------------------------------
H955-11-115 382.6 386.4 3.8 3.77 415.75
----------------------------------------------------------------------------
H955-11-117 367.7 369.6 1.9 16.39 327.32
----------------------------------------------------------------------------
H955-11-121 372.1 372.6 0.5 3.46 354.03
----------------------------------------------------------------------------
H955-11-122 375.1 380.1 4.9 4.83 412.91
----------------------------------------------------------------------------
H955-11-123 378.3 381.7 3.4 5.42 427.12
----------------------------------------------------------------------------
H955-11-124 377.2 383.7 6.5 6.89 442.26
----------------------------------------------------------------------------
H955-11-125 364.7 370.8 6.1 1.44 328.18
----------------------------------------------------------------------------
H955-11-129 368.9 371.3 2.4 14.26 399.81
----------------------------------------------------------------------------
and 377.5 382.4 4.9 3.09 406.60
----------------------------------------------------------------------------
H955-11-130 370.3 371.2 0.8 0.34 400.65
----------------------------------------------------------------------------
and 379.8 381.0 1.2 0.00 407.09
----------------------------------------------------------------------------
H955-11-131 371.9 372.2 0.3 39.47 424.05
----------------------------------------------------------------------------
and 376.8 381.4 4.6 7.00 429.18
----------------------------------------------------------------------------
including 380.3 381.4 1.1 13.27
----------------------------------------------------------------------------
and 397.0 399.3 2.3 0.38 442.92
----------------------------------------------------------------------------
H955-11-132 379.5 379.6 0.2 3.39 416.97
----------------------------------------------------------------------------
and 420.8 421.1 0.3 5.01 444.40
----------------------------------------------------------------------------
and 424.5 425.1 0.6 3.05 446.84
----------------------------------------------------------------------------
----------------------------------------------------------------------------
H955-11-139 407.4 410.0 2.5 1.10 180.35
----------------------------------------------------------------------------
and 426.2 428.1 1.9 1.78 500.08
----------------------------------------------------------------------------
H955-11-140 410.5 413.4 2.9 2.40 479.45
----------------------------------------------------------------------------
H955-11-141 385.4 386.5 1.0 1.03 487.07
----------------------------------------------------------------------------
and 418.8 419.2 0.4 3.43 516.03
----------------------------------------------------------------------------
H955-11-142 471.7 473.7 1.9 0.93 587.04
----------------------------------------------------------------------------
H955-11-143 458.7 461.5 2.9 2.02 543.59
----------------------------------------------------------------------------
and 468.7 470.6 1.9 6.58 551.78
----------------------------------------------------------------------------
including 468.7 469.4 0.7 14.23
----------------------------------------------------------------------------
and 519.8 521.1 1.3 3.70 595.05
----------------------------------------------------------------------------
H933-11-014 131.6 133.9 2.3 2.37 273.41
----------------------------------------------------------------------------
H933-11-015 134.5 136.0 1.5 37.92 292.39
----------------------------------------------------------------------------
including 135.6 136.0 0.4 127.90
----------------------------------------------------------------------------
and 143.8 144.0 0.2 10.77 297.82
----------------------------------------------------------------------------
H933-11-016 125.0 126.3 1.2 2.06 275.39
----------------------------------------------------------------------------
and 131.4 135.3 3.9 8.26 279.59
----------------------------------------------------------------------------
including 133.7 135.3 1.7 17.49
----------------------------------------------------------------------------
and 142.0 142.3 0.3 18.83
----------------------------------------------------------------------------
and 150.9 152.4 1.5 13.20
----------------------------------------------------------------------------
including 151.5 151.9 0.4 39.67
----------------------------------------------------------------------------
and 154.3 154.7 0.5 9.46
----------------------------------------------------------------------------
and 159.2 159.9 0.7 4.73
----------------------------------------------------------------------------
H933-11-018 125.6 130.6 5.0 23.42 250.39
----------------------------------------------------------------------------
including 128.0 128.9 1.0 114.91
----------------------------------------------------------------------------
and 150.8 152.8 2.0 4.32 259.38
----------------------------------------------------------------------------
H933-11-020 129.8 130.2 0.4 3.94 276.33
----------------------------------------------------------------------------
and 132.3 134.0 1.7 7.54 278.01
----------------------------------------------------------------------------
H933-11-021 128.7 130.4 1.7 5.49 266.70
----------------------------------------------------------------------------
H933-11-022 137.7 141.5 3.7 2.74 254.81
----------------------------------------------------------------------------
H933-11-023 111.0 113.1 2.0 1.23 277.67
----------------------------------------------------------------------------
H933-11-024 114.9 118.6 3.7 1.06 271.49
----------------------------------------------------------------------------
H933-11-025 119.2 122.3 3.1 0.51 260.63
----------------------------------------------------------------------------
H933-11-026 126.8 130.3 3.5 0.48 251.40
----------------------------------------------------------------------------
H933-11-028 121.4 125.1 3.6 0.14 283.74
----------------------------------------------------------------------------
H933-11-029 127.3 128.4 1.1 0.31 266.09
----------------------------------------------------------------------------
H933-11-030 137.8 139.1 1.3 0.03 250.91
----------------------------------------------------------------------------
H933-11-031 158.9 161.2 2.4 0.03 215.10
----------------------------------------------------------------------------
H933-11-032 119.7 124.4 4.7 0.03 284.38
----------------------------------------------------------------------------
H933-11-033 125.9 126.8 0.9 0.03 269.05
----------------------------------------------------------------------------
H933-11-034 146.3 158.6 12.3 0.24 247.92
----------------------------------------------------------------------------
H933-11-035 171.4 176.3 4.9 0.27 220.40
----------------------------------------------------------------------------
H933-11-039 126.2 126.4 0.2 183.21 242.62
----------------------------------------------------------------------------
and 131.2 132.2 0.9 8.13 244.75
----------------------------------------------------------------------------
H933-11-040 131.2 131.6 0.5 0.62 292.61
----------------------------------------------------------------------------
H933-11-041 128.5 129.8 1.3 1.10 291.08
----------------------------------------------------------------------------
H933-11-042
----------------------------------------------------------------------------
H933-11-043 121.0 124.9 3.8 0.72 259.99
----------------------------------------------------------------------------
DX-11-001 668.4 669.9 1.5 1.78 400.81
----------------------------------------------------------------------------
and 705.4 708.9 3.4 6.52 420.93
----------------------------------------------------------------------------
DX-11-006 511.4 512.8 1.4 32.54
----------------------------------------------------------------------------
and 611.8 612.4 0.6 3.74
----------------------------------------------------------------------------
and 706.4 706.8 0.5 20.03
----------------------------------------------------------------------------
and 708.9 709.1 0.2 32.51
----------------------------------------------------------------------------
DX-11-007 521.4 522.2 0.9 8.85 445.50
----------------------------------------------------------------------------
DX-11-009 595.6 601.1 5.4 22.87 569.34
----------------------------------------------------------------------------
including 598.2 599.9 1.7 55.58
----------------------------------------------------------------------------
and 611.3 614.3 3.0 5.07 582.52
----------------------------------------------------------------------------
DX-11-015 1079.9 1081.5 1.6 7.10 1006.68
----------------------------------------------------------------------------
DX-11-100 799.1 801.9 2.8 1.51 602.29
----------------------------------------------------------------------------
(1) Due to the exploratory nature of this exploration program and the
variable orientations of the high-grade mineralized zones, the
intersections presented herein may not necessarily represent the true
width of mineralization.
To view Figure 1 - 3D Illustration Looking East of Drill Holes
into L10 Zone, please visit the following link:
http://media3.marketwire.com/docs/sgrcf1201fig1.pdf.
To view Figure 2 - Longitudinal Section Looking North Showing
Significant Pierce Points Nearby the L10 Zone, please visit the
following link:
http://media3.marketwire.com/docs/sgrcf1201fig2.pdf.
To view Figure 3 - 16 Level Plan View Showing Nearby Pierce
Points and Spatial Relationships between Rice Lake Mine, Shoreline
Basalt, and L10, L13 and 007 Zones, please visit the following
link: http://media3.marketwire.com/docs/sgrcf1201fig3.pdf.
To view Figure 4 - 3D Illustration Looking North of Drill Holes
into L10 Zone, please visit the following link:
http://media3.marketwire.com/docs/sgrcf1201fig4.pdf.
To view Figure 5 - All Rice Lake Mining Complex Drilling
Completed From January to October 2011, please visit the following
link: http://media3.marketwire.com/docs/sgrcf1201fig5.pdf.
The TSX and the OTCQX exchanges have not reviewed and do not
accept responsibility for the adequacy or accuracy of this
release.
Contacts: San Gold Corporation Tim Friesen Communications
Director 1 (204) 772-9149 ext. 202 San Gold Corporation George
Pirie President and CEO 1 (416) 214-0024www.sangold.ca
San Gold (CE) (USOTC:SGRCF)
Graphique Historique de l'Action
De Mai 2024 à Juin 2024
San Gold (CE) (USOTC:SGRCF)
Graphique Historique de l'Action
De Juin 2023 à Juin 2024