Eurotin Inc.: Drilling Reconfirms the Presence of High Grade Tin Mineralization in All Parts of the 1200m Long Oropesa Deposit
04 Juin 2012 - 2:17PM
Marketwired Canada
Eurotin Inc. ("Eurotin" or the "Company") (TSX VENTURE:TIN), is pleased to
provide the following drill results and update on its Oropesa tin project,
located in SW Spain.
Drilling Highlights:
ORPD 128: 16.8m @ 1.09% Sn from 97.0m
ORPD 123: 13.5m @ 0.75% Sn from 191.0m
ORPD 129: 6.5m @ 0.86% Sn from 111.0m
ORPD 142: 25.2m @ 0.85% Sn from 85.7m
ORPD 142: 6.3m @ 1.85% Sn from 200.2m
Other Highlights:
-- The second of the four planned large diameter (PQ) drill holes has now
been completed. These drill cores will shortly be shipped to the
laboratories of SGS Mineral Services UK Ltd in Cornwall, UK for detailed
metallurgical testwork.
-- Sufficient holes have now been drilled to demonstrate good continuity of
the mineralized structures over 1200 metres of the known approx. 2000
metres of tin mineralization at Oropesa.
-- A modest, deep hole, drilling campaign will begin shortly to test for
the presence of additional high grade Primary Structures at depths of
between 250 and 750 metres.
The most recent drill results are shown below:
----------------------------------------------------------------------------
Est.
True
From To Length Width Tin -
Hole No. Dip & Azimuth (m) (m) (m) (m) Sn (%) Comment
----------------------------------------------------------------------------
ORPD-113 60 degrees @
200 degrees 14.3 16.7 2.4 0.45%
----------------------------------------------------------------------------
26.3 33.9 7.6 0.23%
----------------------------------------------------------------------------
38.6 48.6 8.0 0.21%
----------------------------------------------------------------------------
----------------------------------------------------------------------------
ORPD-116 60 degrees @
200 degrees NSV
----------------------------------------------------------------------------
----------------------------------------------------------------------------
ORPD-118 60 degrees @
200 degrees 32.3 48.3 16.0 0.42%
----------------------------------------------------------------------------
195.3 201.0 5.7 0.43%
----------------------------------------------------------------------------
214.0 219.2 5.2 0.29%
----------------------------------------------------------------------------
----------------------------------------------------------------------------
ORPD-119 60 degrees @
200 degrees 87.0 91.4 4.4 0.40%
----------------------------------------------------------------------------
114.1 116.1 2.0 0.38%
----------------------------------------------------------------------------
approx. Primary
222.4 230.1 7.7 6.9 0.67% Structure
----------------------------------------------------------------------------
----------------------------------------------------------------------------
ORPD-120 60 degrees @
200 degrees 19.5 33.1 13.6 0.29%
----------------------------------------------------------------------------
100.9 116.0 15.1 0.50%
----------------------------------------------------------------------------
----------------------------------------------------------------------------
ORPD-122 60 degrees @
200 degrees 11.3 17.3 6.0 0.24%
----------------------------------------------------------------------------
56.3 58.3 4.0 0.20%
----------------------------------------------------------------------------
166.3 175.4 9.1 0.36%
----------------------------------------------------------------------------
----------------------------------------------------------------------------
ORPD-123 60 degrees @
200 degrees 89.5 97.6 8.1 0.27%
----------------------------------------------------------------------------
approx. Primary
191.0 204.5 13.5 12.2 0.75% Structure
----------------------------------------------------------------------------
----------------------------------------------------------------------------
ORPD-124 60 degrees @
200 degrees 74.2 86.4 12.2 0.35%
----------------------------------------------------------------------------
117.6 123.6 6.0 0.24%
----------------------------------------------------------------------------
----------------------------------------------------------------------------
ORPD-125 60 degrees @
200 degrees 9.3 16.1 6.8 0.24%
----------------------------------------------------------------------------
21.3 29.3 8.0 0.27%
----------------------------------------------------------------------------
61.4 72.7 11.3 0.22%
----------------------------------------------------------------------------
82.4 92.6 10.2 0.30%
----------------------------------------------------------------------------
Top of
approx. Primary
120.6 122.6 2.0 1.8 0.82% Structure
----------------------------------------------------------------------------
132.4 135.3 2.9 0.33%
----------------------------------------------------------------------------
138.4 147.0 8.6 0.47%
----------------------------------------------------------------------------
----------------------------------------------------------------------------
ORPD-126 60 degrees @
200 degrees 8.3 17.3 9.0 0.39%
----------------------------------------------------------------------------
71.3 82.0 10.7 0.21%
----------------------------------------------------------------------------
225.3 274.4 22.1 0.23%
----------------------------------------------------------------------------
----------------------------------------------------------------------------
ORPD-128 60 degrees @ approx. Primary
200 degrees 97.0 113.8 16.8 15.1 1.09% Structure
----------------------------------------------------------------------------
approx. Primary
Inc. 98.0 106.1 8.1 7.3 1.82% Structure
----------------------------------------------------------------------------
171.3 189.1 17.8 0.40%
----------------------------------------------------------------------------
----------------------------------------------------------------------------
ORPD-129 60 degrees @ approx. Primary
200 degrees 111.0 119.5 6.5 5.9 0.86% Structure
----------------------------------------------------------------------------
129.0 140.0 11.0 0.31%
----------------------------------------------------------------------------
144.0 148.1 4.1 0.39%
----------------------------------------------------------------------------
----------------------------------------------------------------------------
ORPD-131 Top of
60 degrees @ approx. Primary
200 degrees 172.8 175.8 3.0 2.7 0.61% Structure
----------------------------------------------------------------------------
181.8 188.6 6.8 0.34%
----------------------------------------------------------------------------
----------------------------------------------------------------------------
ORPD-133 60 degrees @
200 degrees 86.8 89.8 3.0 0.44%
----------------------------------------------------------------------------
119.6 137.6 18.0 0.30%
----------------------------------------------------------------------------
----------------------------------------------------------------------------
ORPD-142 60 degrees @ approx. Primary
200 degrees 85.7 110.9 25.2 22.7 0.85% Structure
----------------------------------------------------------------------------
approx. Primary
Inc. 101.9 110.9 9.8 8.8 1.19% Structure
----------------------------------------------------------------------------
approx. Primary
200.2 206.5 6.3 5.7 1.85% Structure
----------------------------------------------------------------------------
Note 1: A cut off grade of 0.20% tin has been used.
Note 2: True widths for Replacement Structures not ascertained due to irregular
shaped mineralized envelopes.
Note 3: Figures shown in bold represent significant tin results of Width (m) x
Grade (%), exceeding a value of 6 and having a grade exceeding 0.65% tin.
Please see below link for Oropesa drill hole locations reported in and prior to
this press release:
http://media3.marketwire.com/docs/604TINfig1.pdf
Latest Developments at Oropesa
1. The Company will shortly commence an approx. 10km2 soil geochemistry
survey at Oropesa. The lines will be 250 metres apart and samples will
be taken on 50 metre spacings. Wherever tin anomalies are found, the
area will then be tested on spacings of 25 metres.
2. The Oropesa property is host to several regional geological structures.
Testwork, including drilling, has now commenced to determine which
structures were the conduits for tin mineralization from a deep granite
source.
Conclusion
Peter Miller, President & CEO, comments: "Geological interpretation of our
recent drill results has added further evidence to our belief that the Oropesa
deposit is part of a major new Tin District, probably the first to be discovered
in over 40 years. So while the development of an open pit mine here obviously
remains our first priority in providing value to our shareholders, we are also
keen to determine the district's tin potential."
Assay and QA/QC Methodology for Oropesa Drill Core
All core produced is taken daily from each drill site to the Company's secure
facility in Fuente Obejuna, where it is logged by the Company's geologists. This
process takes place under the supervision of Qualified Person Victor Guerrero
Merino, Euro.Geol.
The core, usually of around one metre length, which is chosen by the Company's
geologists for assaying, is then cut in half either at the Company's own
facilities at Fuente Obejuna or at ALS Chemex's sample preparation facility in
Seville in southern Spain.
At the ALS Chemex facility, the cut core is logged into the in house LIMS
tracking system, after which each sample is prepared using procedure code 'Prep
31'. This procedure involves the drying, weighing and fine crushing to 70%
passing -2mm. A 250g split of the crushed material is then pulverised to greater
than 85% passing 75 microns. Samples are then shipped by bonded courier to
Vancouver for analysis.
In Vancouver, ALS Chemex procedure ME-XRF10 is used for tin analysis and
ME-ICP61 for multi-element (33) analysis. The ME-XRF10 procedure uses 0.9g of
calcined sample pulp, which is mixed with 4.5g of lithium tetraborate and 4.5g
of lithium metaborate. This mixture is then fused at 1,100 degrees C to produce
a flat molten disc, which is subsequently analysed by XRF spectrometry. ALS
Chemex analyses its own standard samples and blanks, plus duplicates, within
each set of samples provided by the Company. The Company has recently introduced
its own blanks and standards as a further means of checking the accuracy of the
assay results. One in every 15 samples analysed by ALS Chemex is then sent to
SGS's laboratories in Cornwall, UK, for check assaying for tin. The Company
keeps all its sample pulps and rejects in locked steel containers at its secure
storage facility in Fuente Obejuna.
The Company recently completed a new check assay program using five certified
laboratories. The pulp sample composites used had varying tin grades; the
accuracy of the results obtained was within acceptable parameters.
Mr. Victor Guerrero Merino, an independent geological consultant and a Qualified
Person pursuant to NI 43-101, has reviewed and approved the technical
information in this news release on behalf of the Company.
Forward-Looking Statements
Results presented in this press release are exploratory in nature. Historical
data, if mentioned, should not be relied upon, as they are not admissible under
NI 43-101 rules and the Company has not conducted sufficient testing to verify
this type of information. In addition, this press release includes certain
forward-looking statements within the meaning of Canadian securities laws that
are based on expectations, estimates and projections as of the date of this
press release. There can be no assurance that such statements will prove
accurate, and actual results and developments are likely to differ, in some case
materially, from those expressed or implied by the forward-looking statements
contained in this press release. Readers of this press release are cautioned not
to place undue reliance on any such forward-looking statements.
Forward-looking statements contained in this press release are based on a number
of assumptions that may prove to be incorrect, including, but not limited to:
timely implementation of anticipated drilling and exploration programs; the
successful completion of new development projects, planned expansions or other
projects within the timelines anticipated and at anticipated production levels;
the accuracy of reserve and resource estimates, grades, mine life and cash cost
estimates; whether mineral resources can be developed; title to mineral
properties; financing requirements, general market conditions, and the
uncertainty of access to additional capital; changes in the world-wide price of
mineral commodities; general economic conditions; and changes in laws, rules and
regulations applicable to the Company. In addition to being subject to a number
of assumptions, forward-looking statements in this press release involve known
and unknown risks, uncertainties and other factors that may cause actual results
and developments to be materially different from those expressed or implied by
such forward-looking statements. The Company has no intention or obligation to
update the forward-looking statements contained in this press release.
Tincorp Metals (TSXV:TIN)
Graphique Historique de l'Action
De Mai 2024 à Juin 2024
Tincorp Metals (TSXV:TIN)
Graphique Historique de l'Action
De Juin 2023 à Juin 2024
