Liberty Gold Corp. (TSX: LGD; OTCQX: LGDTF) (“Liberty Gold” or the
“Company”) is pleased to announce an update to the independent
Mineral Resource Estimate (the “Resource” or “MRE”) at its Black
Pine Oxide Gold Project (“Black Pine”) in southeastern Idaho. The
updated Resource builds on the maiden resource released on July 13,
20211, and includes an additional 528 Reverse Circulation (“RC”)
and core holes (126,726 metres) drilled by Liberty Gold between
April 2021 and October 2022.
The MRE has an effective date of January 21,
2023, is reported using a constraining resource pit at a cut-off
grade (“COG”) of 0.20 grams per tonne (“g/t”) gold (“Au”) and
consists of:
- An indicated resource of 2,613,000
ounces of oxide gold at an average grade of 0.52 g/t Au and
totalling 157,267,000 tonnes (“t”); and
- An inferred
resource of 483,000 ounces of oxide gold at an average grade of
0.43 g/t Au and totalling 35,150,000 t.
- A high-grade subset of the MRE
within the 0.20 g/t Au resource pit using a COG of 0.50 g/t Au
consists of:
- An indicated
1,548,000 ounces of gold at an average grade of 1.02 g/t Au and
totalling 47,391,000 t; and
- An inferred 219,000
ounces of gold at an average grade of 0.93 g/t Au and totalling
7,315,000 t.
In total, using the same COG as the previous
resource estimate, the updated MRE represents a 52% increase in
indicated ounces and a 31% increase in inferred ounces over the
maiden resource released just 18 months ago (see press release
dated July 13, 2021). Within the higher-grade subset (0.50 g/t Au
COG within the 0.20 g/t Au resource pit), 528,000 indicated ounces
were added relative to the 2021 maiden resource estimate, a 52%
increase. The significant increase in ounces can be attributed
to:
- The discovery (see press release dated September 1, 2021) and
subsequent intensive drilling of 154 holes included in the resource
in the Rangefront Zone beginning in July 2021 over a 15 month
period.
- Expansion and/or amalgamation of several existing zones,
including the CDF, E, and M zones and discovery of the Bobcat Zone,
a southern extension of the CDF Zone (see press released dated
December 13, 2022).
- Drill testing and drill definition of surficial waste rock
storage and pit backfill.
- Definition drilling in previously-defined areas of inferred
mineralization.
The MRE was completed by SLR Consulting (Canada)
Ltd., Toronto, Canada (“SLR”). SLR is a highly respected
engineering company with extensive experience in resource
estimation and audit of the largest Carlin-style gold systems in
the Great Basin.
Jason Attew, President and CEO of
Liberty Gold stated, “This updated Mineral Resource
Estimate for our flagship Black Pine project represents a major
milestone for Liberty Gold and a major accomplishment for our
exploration team, who spent the last year and a half with a
singular focus on expanding and upgrading the resource endowment at
Black Pine. The team has delivered impressive results.
Compared to the July 2021 resource estimate, tonnes are up
significantly while grade has improved using conservative input
assumptions, positioning Black Pine in the rarified territory of an
oxide resource with more than 2.6 million indicated ounces and a
further half a million ounces inferred. Moreover, we are encouraged
that Black Pine continues to expand in all directions with future
resource growth expected as drill results continue to impress.”
For maps and cross sections of the Black Pine Mineral Resource
block model, please click
here: https://libertygold.ca/images/news/2023/February/BlackPine_ResourceUpdate.pdf
TABLE 1: BLACK PINE UPDATED MINERAL RESOURCE
ESTIMATE
Zone |
Classification |
Tonnes |
g/t Au |
oz Au |
% Indicated% Inferred |
% TotalResource |
Discovery Zone |
Indicated |
86,275,000 |
0.54 |
1,498,000 |
93 |
52 |
Inferred |
8,283,000 |
0.40 |
107,000 |
7 |
Rangefront Zone |
Indicated |
46,581,000 |
0.49 |
732,000 |
86 |
27 |
Inferred |
7,913,000 |
0.46 |
118,000 |
14 |
CDF Zone |
Indicated |
13,649,000 |
0.40 |
173,000 |
66 |
8 |
Inferred |
7,260,000 |
0.39 |
90,000 |
34 |
M Zone |
Indicated |
5,255,000 |
0.71 |
120,000 |
92 |
4 |
Inferred |
762,000 |
0.45 |
11,000 |
8 |
Back Range Zone |
Indicated |
1,584,000 |
0.62 |
32,000 |
29 |
4 |
Inferred |
3,783,000 |
0.63 |
77,000 |
71 |
E Zone |
Indicated |
2,614,000 |
0.43 |
36,000 |
49 |
2 |
Inferred |
3,529,000 |
0.32 |
37,000 |
51 |
J Zone |
Indicated |
1,310,000 |
0.50 |
21,000 |
32 |
2 |
Inferred |
3,619,000 |
0.38 |
44,000 |
68 |
Total Resource |
Indicated |
157,267,000 |
0.52 |
2,613,000 |
84 |
84 |
Inferred |
35,150,000 |
0.43 |
483,000 |
16 |
16 |
Notes:
- CIM (2014) definitions were followed for Mineral
Resources.
- Mineral Resources are estimated at a gold cut-off grade of 0.20
g/t.
- Mineral Resources are estimated using a long-term gold price of
US$1,800 per ounce.
- Mineral Resources are estimated using a variable recovery
derived from metallurgical studies.
- Bulk density is variable by rock type.
- There are no Mineral Reserves.
- Mineral Resources that are not Mineral Reserves do not have
demonstrated economic viability.
- Mineral Resources are reported within conceptual open
pits.
- Rounding as required by reporting guidelines may result in
apparent discrepancies between tonnes, grades, and contained gold
content.
- The effective date of the Mineral Resource estimate is January
21, 2023.
- The estimate of mineral resources may be materially affected by
geology, environment, permitting, legal, title, taxation,
sociopolitical, marketing, or other relevant issues.
- See additional resource estimation notes below.
|
|
KEY POINTS
- The
updated MRE captures historic shallow drilling and Liberty Gold
drilling through mid-October 2022 throughout the 14 square
kilometer (“km2”) surface gold anomaly surrounding the historic
pits and in the Rangefront area, leaving large areas of the project
still untested.
- A
combination of historic drilling and Liberty Gold drilling
comprised of 2,398 tightly spaced drill holes and representing
362,423 m of drilling, allows for a high degree of confidence in
the integrity of the MRE, as illustrated by 84.4% of the MRE in the
indicated category.
- Within
the 0.20 g/t Au resource pit shell, there is a subset of
higher-grade mineralization exceeding 1.5 million ounces of
indicated material at a grade of over 1 g/t Au (0.50 g/t Au cut-off
grade).
- An
analysis of geological potential at lower cut-off grades, down to
the marginal cut-off grade of 0.10 g/t Au, suggests that
significant upside potential exists for recovery of additional
ounces in a future mine at Black Pine by applying operational
cut-off grades similar to other run-of-mine oxide heap-leach
operations in the Great Basin. These lower grade ounces are
estimated in the block model to a high degree of confidence and
have supporting metallurgical test work.
- Inferred
portions of the MRE largely reflect areas of recent resource
expansion drilling and will continue to be upgraded through infill
drilling.
- The
updated MRE is supported by four phases of metallurgical column
testing, completed between 2019 and 2021. Three additional phases
of metallurgical test work are currently in progress for Black
Pine. Results will be released when available from February through
December 2023.
- As of
December 31, 2022, Liberty Gold has expended approximately US$48.7
million dollars all-in on the project, including acquisition costs,
or approximately US$16 per resource ounce of gold.
“The updated MRE represents the next step in
validating our hypothesis that the Black Pine gold system may be
the largest oxide gold system in the Great Basin not currently
being mined,” stated Moira Smith, Liberty Gold’s Corporate
Technical Advisor. “Our initial concept of a gold system
hosted along low-angle, bedding-parallel faults over a wide area
has withstood the test of time, and we were able to test the
concept in an area of shallow cover to the east of the main zone of
mineralization, resulting in a major discovery at Rangefront. With
over 40 holes pending assay results post-resource at this time, we
are well on our way toward further resource growth. At this point,
with data in hand from this resource update, both within and
outside of the current resource pit, we believe that geological
potential across our two Great Basin properties could extend to at
least 7 million ounces.”
RESOURCE DISTRIBUTION ACROSS AND WITHIN
THE BLACK PINE DEPOSIT
With reference to Table 1, above, the updated
MRE reflects efforts to grow the deposit through:
- Testing
of new targets: The Rangefront Zone, targeted by drilling
starting in July 2021, has added over 679,000 ounces of indicated
and 93,000 ounces of inferred resource to the Black Pine deposit
relative to the 2021 resource estimate, and now contributes 27% to
the total Resource. It is located adjacent to flat terrain suitable
for future infrastructure development.
-
Targeting of areas with potential to yield near-surface
mineralization at higher than average grades including the
M Zone and F Zone. The M Zone now hosts 120,000 indicated ounces at
an average grade of 0.71 g/t Au.
-
Targeting of sparsely-drilled, smaller zones with
multiple small resource pits in order to amalgamate them into
larger bodies of contiguous mineralization in fewer pits, including
the M Zone, portions of the CDF Zone and Back Range Zone.
- Step-out
drilling along the margins of existing zones, including
the CDF, E and Rangefront zones.
- Drill
testing of surficial mine disturbance, including waste
rock storage and pit backfill, to identify and drill off areas of
above cut-off grade material.
- Drill testing of new
areas including the newly-defined Bobcat Zone (reported as
part of the CDF Zone).
The Discovery Zone continues to host the largest
contiguous body of gold mineralization at Black Pine, with the
Rangefront Zone now the second largest. The Rangefront Zone is open
to the west, north and east, with drilling continuing to expand its
limits.
RESOURCE ESTIMATE ANALYSIS BY BLOCK GRADES
The average grade of the deposit within the
limits of the 0.20 g/t Au resource pit shell reflects a wide range
of block grades. At successively higher cut-off grades, a sizeable
portion of the deposit remains (Table 2). At a block COG of 0.50
g/t Au, an indicated 1,548,000 ounces at an average grade of 1.02
g/t Au remain. The distribution of the above 0.50 g/t Au COG blocks
is shown in the graphics provided at the link above.
TABLE 2: RESOURCE GRADE DISTRIBUTION AT
SUCCESSIVELY HIGHER CUT-OFF GRADES WITHIN THE 0.2 G/T AU REPORTING
PIT*
|
Block cut-off grade |
Classification |
Tonnes x 1000 |
Au g/t |
Au Ounces x 1000 |
|
|
|
|
|
|
0.20 g/t |
Indicated |
157,267 |
0.52 |
2,613 |
|
|
Inferred |
35,150 |
0.43 |
483 |
|
|
0.25 g/t |
Indicated |
118,475 |
0.61 |
2,334 |
|
|
Inferred |
24,799 |
0.51 |
408 |
|
|
0.30 g/t |
Indicated |
93,679 |
0.70 |
2,117 |
|
|
Inferred |
18,129 |
0.60 |
350 |
|
|
0.50 g/t |
Indicated |
47,391 |
1.02 |
1,548 |
|
|
Inferred |
7,315 |
0.93 |
219 |
|
|
*Please refer to the notes accompanying Table 1, above, for
additional information. The Black Pine updated MRE is shown in
bold and italic font. |
|
|
|
|
POTENTIAL UPSIDE
Potential upside was examined by evaluating the
block model down to successively lower cut-off grades with
corresponding constraining resource pits, approaching the marginal
COG.
Considerable upside remains for resource
expansion at lower COGs, to be investigated in the course of
carrying out future engineering studies.
TABLE 3: SENSITIVITY ANALYSIS USING
LOWER CUT-OFF GRADES*
|
Cut-off (g/t Au) |
Category |
Tonnes |
g/t Au |
Ounces Au |
|
|
0.10 |
Indicated |
311,571,000 |
0.34 |
3,412,000 |
|
|
Inferred |
97,244,000 |
0.27 |
850,000 |
|
|
0.15 |
Indicated |
230,709,000 |
0.41 |
3,056,000 |
|
|
Inferred |
66,042,000 |
0.33 |
702,000 |
|
|
0.17 |
Indicated |
197,518,000 |
0.45 |
2,875,000 |
|
|
Inferred |
50,260,000 |
0.37 |
599,000 |
|
|
0.20 |
Indicated |
157,267,000 |
0.52 |
2,613,000 |
|
|
Inferred |
35,150,000 |
0.43 |
483,000 |
|
|
*Please refer to notes accompanying Table 1, above. The reporting
MRE is shown in bold and italic font. Tonnes,
grade and ounces are expressed within a series of nested pit shells
generated at USD$1800/ounce gold whereby only the material above
each cut-off grade is processed. |
|
|
|
|
In addition to the above, the block model
contains a large number of unclassified blocks lying outside of the
limits of the 0.10 g/t Au pit shell. It is unknown if further
drilling will result in classification of these blocks as resource.
However, the presence of gold mineralization beyond the pit limits
suggests the potential for future additions of gold to the current
MRE.
Non-oxide gold mineralization, primarily in the
form of carbonaceous material with very low cyanide solubility, is
present at the base of the deposit in several locations, as well as
sporadically elsewhere in the stratigraphic column. This material
was assigned a zero recovery in the conceptual pit model, such that
it is excluded from the pits, and, if internal to the pits, is not
included in the MRE. Very high grades were encountered locally in
this material. It is not known whether some or all of this material
is recoverable using other methods without further metallurgical
studies.
2023 WORK PROGRAM
Much of the gold system at Black Pine remains
unexplored or incompletely tested, including areas along the
southeastern, eastern and northeastern edge of the deposit, as well
as the gap between the Back Range and E zones.
A recently submitted modification to the United
States Forest Service (“USFS”) Plan of Operations, as well as a
recently received Bureau of Land Management Plan of Operations will
allow access to much of this area beginning in 2023.
The 2023 drill program commenced on January 7,
2023, in low elevation areas along the eastern margin of the
deposit. The budget includes 32,000 m of RC drilling targeting
resource upgrade and expansion over several areas of the deposit,
as well as reconnaissance drilling in new areas along the eastern
margin of the deposit.
In parallel with the drill program, development
work is continuing, comprising:
- Phase 5 metallurgical column test work (55 columns).
- Submission of an additional modification to the USFS Plan of
Operations.
- Geotechnical and hydrological studies.
- Waste rock geochemical studies.
- Environmental baseline work.
ABOUT BLACK PINE
Black Pine is located in the northern Great
Basin, immediately adjacent to the Utah/Idaho border. It is a
Carlin-style gold system, similar in many ways to the prolific
deposits located along Nevada’s Carlin trend. Like Nevada Gold
Mine’s Long Canyon deposit, Black Pine represents a growing number
of Carlin-style gold systems located off the main Carlin and Cortez
trends in underexplored parts of the Great Basin. The historic
Black Pine Mine operated from 1992 to 1997, during a period of
historically low gold prices, with 435,000 ounces of gold produced
from five composite, shallow pits, at an average grade of 0.63 g/t
Au.
Gold mineralization at Black Pine is hosted in a
100 to 500 m-thick package of receptive, faulted carbonate rocks of
the Pennsylvanian Oquirrh Formation. The rocks show evidence of
extensive decalcification and clay alteration typical of
Carlin-style gold deposits and are strongly oxidized over the
entire extent of the 14 km2, exposed portion of the gold
system.
Metallurgical column test results received to
date indicate rapid gold recoveries, relatively insensitive to
crush size, which support a simple, low-cost heap-leach
process.
A virtual site tour and 3D model of Black Pine
property, including details about the geology and mineralization,
will be available in due course on the Company’s website:
libertygold.ca.
ESTIMATION METHODS
The resource estimate was completed by Ryan
Rodney, C.P.G., Senior Resource Geologist, of SLR. Mr. Rodney is an
Independent Qualified Person as defined by National Instrument
43-101 Standards of Disclosure for Mineral Projects (“NI 43-101”).
The resource estimate was prepared in accordance with the Canadian
Institute of Mining, Metallurgy and Petroleum (“CIM”) Standards on
Mineral Resources and Mineral Reserves, adopted by the CIM Council,
as amended. Estimation methods are summarized below.
- The gold mineral resources at the
Black Pine Project were modeled and estimated by:
- Developing a
geological model, in Leapfrog Geo reflecting low-angle fault
control and stratigraphic control of mineralization hosted in
receptive carbonate host rocks;
- evaluating the drill data
statistically;
-
interpreting low (0.1 g/t Au) and high-grade (0.3 g/t Au for
Rangefront and 0.5 g/t Au for all other areas) gold-domains using
Leapfrog Edge;
-
compositing data to 3.048 metres (10 feet) within the gold
domains;
-
coding a block model comprised of 10 x 10 x 5 (x, y, z) metre
blocks and sub-blocked to 2.5 x 2.5 x 1.25 metre blocks to the
domains;
- analyzing the
modeled mineralization geostatistically to aid in the establishment
of estimation and classification parameters;
- interpolating gold
grades using inverse distance cubed (ID3) and a three pass
interpolation strategy into the model blocks using the mineral
domain coding to explicitly constrain the gold grade estimations;
and
- evaluating,
statistically and visually, the resulting model in detail prior to
finalizing the mineral resource estimation.
-
The Black Pine Deposit mineral resource has been constrained by
optimized pit shells created using a gold price of US$1,800/ounce
and pit slopes ranging from 45 to 47 degrees in eight sectors
defined by geotechnical studies. Additional inputs for the
pit-optimizations include: Mining - $2.35/tonne mined, heap
leaching - $2.00/tonne processed; and G&A cost of $0.80/tonne
processed at an assumed 10 million tonnes per year processing rate.
Gold recoveries are based on equations derived from metallurgical
data and vary by grade and rock unit. A 0.5% net smelter return
royalty was also applied.
-
The drilling database for the project contains 1,854 historical RC
holes and 23 diamond core holes, as well as 768 RC and 30 core
holes drilled by Liberty Gold. The historical holes at the Black
Pine Project were primarily drilled from the mid 1980s to the late
1990s by Noranda and Pegasus Gold.
-
A technical report on the updated resource estimate will be
prepared in accordance with NI 43-101 and filed within 45 days of
this news release on Liberty Gold’s issuer profile on SEDAR
at www.sedar.com
The technical information contained in this news
release has been reviewed and approved by Mr. Ryan Rodney, C.P.G.
of SLR, an Independent Qualified Person as defined by NI 43-101.
Mr. Rodney has verified the data disclosed, including sampling,
analytical, and test data underlying the drill results, and he
consents to the inclusion in this release of said data in the form
and context in which it appears. Mr. Rodney experienced no
limitations with respect to data verification activities related to
the Black Pine project.
Moira Smith, Ph.D., P.Geo., Corporate Technical
Advisor to Liberty Gold, is the Company's designated Qualified
Person for this news release within the meaning of NI 43-101 and
has reviewed and validated that the information contained in the
release is accurate.
ABOUT LIBERTY GOLD
Liberty Gold is focused on exploring for and
developing open pit oxide deposits in the Great Basin of the United
States, home to large-scale gold projects that are ideal for
open-pit mining. This region is one of the most prolific
gold-producing regions in the world and stretches across Nevada and
into Idaho and Utah. We know the Great Basin and are driven to
discover and advance big gold deposits that can be mined profitably
in open-pit scenarios.
For more information, visit libertygold.ca or contact:
Susie Bell, Manager, Investor Relations Phone:
604-632-4677 or Toll Free 1-877-632-4677 info@libertygold.ca
QUALITY ASSURANCE – QUALITY CONTROL
Drill composites were calculated using a cut-off
of 0.10 g/t Au. Drill intersections are reported as drilled
thicknesses. True widths of the mineralized intervals vary between
30% and 100% of the reported lengths due to varying drill hole
orientations but are typically in the range of 50% to 90% of true
width. Drill samples were assayed by ALS Limited in Reno, Nevada
for gold by Fire Assay of a 30 gram (1 assay ton) charge with an AA
finish, or if over 5.0 g/t Au were re-assayed and completed with a
gravimetric finish. For these samples, the gravimetric data were
utilized in calculating gold intersections. For any samples
assaying over 0.10 parts per million an additional cyanide leach
analysis is done where the sample is treated with a 0.25% NaCN
solution and rolled for an hour. An aliquot of the final leach
solution is then centrifuged and analyzed by Atomic Absorption
Spectroscopy. QA/QC for all drill samples consists of the insertion
and continual monitoring of numerous standards and blanks into the
sample stream, and the collection of duplicate samples at random
intervals within each batch. Selected holes are also analyzed for a
51 multi-element geochemical suite by ICP-MS. ALS Geochemistry-Reno
is ISO 17025:2005 Accredited, with the Elko and Twin Falls prep lab
listed on the scope of accreditation.
All statements in this press release, other than
statements of historical fact, are "forward-looking information"
with respect to Liberty Gold within the meaning of applicable
securities laws, including statements that address potential
quantity and/or grade of minerals, the potential size of the
mineralized zone, the proposed timing of exploration and
development plans, the expansion and future resource growth
expected at Black Pine, expected capital costs at Black Pine,
expected gold recoveries from the Black Pine mineralized material,
the potential upgrade of inferred mineral resources to measured and
indicated mineral resources, the potential for future additions to
the current mineral resource estimate, the 2023 work program and
the results thereof, the timing and results of any resource updates
and the planned development work at Black Pine. Forward-looking
information is often, but not always, identified by the use of
words such as "seek", "anticipate", "plan", "continue", "planned",
"expect", "project", "predict", "potential", "targeting",
"intends", "believe", "potential", and similar expressions, or
describes a "goal", or variation of such words and phrases or state
that certain actions, events or results "may", "should", "could",
"would", "might" or "will" be taken, occur or be achieved.
Forward-looking information is not a guarantee of future
performance and is based upon a number of estimates and assumptions
of management at the date the statements are made including, among
others, assumptions about future prices of gold, and other metal
prices, currency exchange rates and interest rates, favourable
operating conditions, political stability, obtaining governmental
approvals and financing on time, obtaining renewals for existing
licenses and permits and obtaining required licenses and permits,
labour stability, stability in market conditions, availability of
equipment, the availability of drill rigs, successful resolution of
disputes and anticipated costs and expenditures. Many assumptions
are based on factors and events that are not within the control of
Liberty Gold and there is no assurance they will prove to be
correct.
Such forward-looking information, involves known
and unknown risks, which may cause the actual results to be
materially different from any future results expressed or implied
by such forward-looking information, including, risks related to
the interpretation of results and/or the reliance on technical
information provided by third parties as related to the Company’s
mineral property interests; changes in project parameters as plans
continue to be refined; current economic conditions; future prices
of commodities; possible variations in grade or recovery rates; the
costs and timing of the development of new deposits; failure of
equipment or processes to operate as anticipated; the failure of
contracted parties to perform; the timing and success of
exploration activities generally; the timing of the publication of
any updated resources; delays in permitting; possible claims
against the Company; labour disputes and other risks of the mining
industry; delays in obtaining governmental approvals, financing or
in the completion of exploration as well as those factors discussed
in the Annual Information Form of the Company dated March 25, 2022
in the section entitled "Risk Factors", under Liberty Gold’s SEDAR
profile at www.sedar.com.
Although Liberty Gold has attempted to identify
important factors that could cause actual actions, events or
results to differ materially from those described in
forward-looking information, there may be other factors that cause
actions, events or results not to be as anticipated, estimated or
intended. There can be no assurance that such information will
prove to be accurate as actual results and future events could
differ materially from those anticipated in such statements.
Liberty Gold disclaims any intention or obligation to update or
revise any forward-looking information, whether as a result of new
information, future events or otherwise.
Cautionary Note for United States Investors
The information in this news release, including
any information incorporated by reference, and disclosure documents
of Liberty Gold that are filed with Canadian securities regulatory
authorities concerning mineral properties have been prepared in
accordance with the requirements of securities laws in effect in
Canada, which differ from the requirements of United States
securities laws.
Without limiting the foregoing, these documents
use the terms “measured resources”, “indicated resources”,
“inferred resources” and “probable mineral reserves”. Shareholders
in the United States are advised that, while such terms are defined
in and required by Canadian securities laws, the United States
Securities and Exchange Commission (the “SEC”) does not recognize
them. Under United States standards, mineralization may not be
classified as a reserve unless the determination has been made that
the mineralization could be economically and legally produced or
extracted at the time the reserve determination is made. United
States investors are cautioned not to assume that all or any part
of measured or indicated resources will ever be converted into
reserves. Further, inferred resources have a great amount of
uncertainty as to their existence and as to whether they can be
mined legally or economically. It cannot be assumed that all or any
part of the inferred resources will ever be upgraded to a higher
resource category. Under Canadian rules, estimates of inferred
mineral resources may not form the basis of feasibility,
pre-feasibility or other technical reports or studies, except in
rare cases. Therefore, United States investors are also cautioned
not to assume that all or any part of the inferred resources exist,
or that they can be mined legally or economically. Disclosure of
contained ounces is permitted disclosure under Canadian
regulations; however, the SEC normally only permits issuers to
report resources as in place tonnage and grade without reference to
unit measures. Accordingly, information concerning descriptions of
mineralization and resources contained in these documents may not
be comparable to information made public by United States companies
subject to the reporting and disclosure requirements of the
SEC.
____________________________________1 Included in the Updated
Technical Report and Resource Estimate for the Black Pine Gold
Project, Cassia County, Idaho, USA dated August 18, 2021 with an
effective date of June 20, 2021.
Liberty Gold (TSX:LGD)
Graphique Historique de l'Action
De Juin 2024 à Juil 2024
Liberty Gold (TSX:LGD)
Graphique Historique de l'Action
De Juil 2023 à Juil 2024