Table 2. Analytical and Assay Results from Texas East Zone
Drill Hole ID, Zone | From | To | Core Interval (ft) | Zn % | Ag | Au | Pb % | Cu % |
& Interval | (ft) | (ft) | opt | opt |
TEXAS EAST ZONE | | | | | | | | |
SM20-029 | 202.20 | 206.59 | 4.40 | 19.67 | 6.688 | 0.111 | 3.94 | 0.25 |
| | | | | | | | |
SM20-043 | | | | | | | | |
INTERVAL 2: | 185.47 | 200.89 | 15.42 | 6.19 | 4.918 | 0.060 | 0.71 | 0.39 |
INCLUDING: | 185.47 | 196.49 | 11.02 | 8.65 | 6.361 | 0.071 | 0.9 | 0.52 |
| | | | | | | | |
SM20-050 | | | | | | | | |
INTERVAL 1: | 151.84 | 159.42 | 7.58 | 0.1 | 4.255 | 0.005 | 0.01 | 2.91 |
INTERVAL 2: | 162.89 | 190.29 | 27.40 | 4.17 | 5.682 | 0.118 | 0.78 | 0.54 |
| | | | | | | | |
Analytical and Assay results are pending for drill holes SM20-32, 34, 35, 37, 39, 40, 44-48 and 51 |
Note: Reported widths are drilled core lengths as true widths are unknown at this time. It is estimated based upon current data that true widths might range between 60-80% of the drilled intersection. Intervals cut-offs are based upon visual contacts of massive sulphide units with no more than 0.80 meters of internal skarn. For hole SM20-050 Interval 1. a nominal cut-off grade of 0.5% Cu has been applied to determine the boundaries of the intersections for this skarn-hosted mineralization. Table 3 below documents; Drill Hole Azimuth, Dip, end of hole length, and Collar Coordinates (Note: See details below in QA/QC section).
Figure 1: 3D Perspective view inclined 200 looking north-north-east, with hole locations for SM20-028 thru SM20-050
Table 3: Drill Hole Azimuth, Dip, End of hole length and Collar Coordinates
Hole ID | Azimuth Degree | Dip Degree | End of hole Length (ft) | East (ft.) | North (ft.) | Elev. (ft.) |
SM20-028 | 90 | 15 | 246 | 2311764 | 393645 | 6866.77 |
SM20-029 | 126 | -12 | 325 | 2311764 | 393645 | 6866.77 |
SM20-030 | 95 | -30 | 125 | 2311764 | 393645 | 6866.77 |
SM20-031 | 110 | -14 | 179 | 2311764 | 393645 | 6866.77 |
SM20-032* | 105 | -64 | 144 | 2311764 | 393645 | 6866.77 |
SM20-033 | 115 | -30 | 205 | 2311764 | 393645 | 6866.77 |
SM20-034* | 80 | 15 | 217 | 2311764 | 393645 | 6866.77 |
SM20-035* | 105 | 14 | 78 | 2311764 | 393645 | 6866.77 |
SM20-036 | 105 | -14 | 269 | 2311764 | 393645 | 6866.77 |
Hole ID | Azimuth Degree | Dip Degree | End of hole Length (ft) | East (ft.) | North (ft.) | Elev. (ft.) |
SM20-037* | 100 | -14 | 225 | 2311764 | 393645 | 6866.77 |
SM20-038 | 110 | -30 | 185 | 2311764 | 393645 | 6866.77 |
SM20-039* | 122 | -8 | 350 | 2311764 | 393645 | 6866.77 |
SM20-040* | 105 | -29 | 200 | 2311764 | 393645 | 6866.77 |
SM20-041 | 110 | -40 | 185 | 2311764 | 393645 | 6866.77 |
SM20-042 | 87 | -62 | 204 | 2311764 | 393645 | 6866.77 |
SM20-043 | 124 | -20 | 399 | 2311764 | 393645 | 6866.77 |
SM20-044 | 124 | -20 | 154 | 2311764 | 393645 | 6866.77 |
SM20-045* | 0 | -55 | 108 | 2311764 | 393645 | 6866.77 |
SM20-046* | 127 | -37 | 305 | 2311764 | 393645 | 6866.77 |
SM20-047* | 60 | -80 | 173 | 2311764 | 393645 | 6866.77 |
SM20-048* | 135 | -36 | 275 | 2311764 | 393645 | 6866.77 |
SM20-049 | 155 | -60 | 205 | 2311764 | 393645 | 6866.77 |
SM20-050 | 150 | -42 | 276 | 2311764 | 393645 | 6866.77 |
SM20-051* | 170 | -49 | 404 | 2311760 | 393643 | 6866.07 |
*The results pending for this drillhole.
Phase I Drilling at South Mountain under BeMetals Option Agreement
The principal objectives of the Phase 1 work plan at South Mountain were to test for potential extensions of the mineralized zones and confirm the grade distribution of the current polymetallic mineral resource estimate. The Company has now successfully completed the phase 1 program comprised of 20 underground drill holes for a total of approximately 2,290 meters. Geological logging and sampling of all drill holes have now been completed with all analytical results received. These results have been compiled into the Project's geological database and were used to design the phase 2 drilling program for 2020. Following the phase 2 drilling program, all new results were integrated into an updated mineral resource estimation for the Project and announced during the second quarter of 2021.
Table 1. BeMetal`s Analytical and Assay Results for the Phase 1 Drilling Program
Drill Hole ID, Zone & Interval | From (m) | To (m) | Core Interval (m) | Zn % | Ag g/t | Au g/t | Pb % | Cu % |
DMEA Zone | | | | | | | | |
SM19-002 | | | | | | | | |
Interval 1 | 46.88 | 57.39 | 10.51 | 17.81 | 226 | 2.41 | 1.59 | 0.16 |
Interval 2 | 67.85 | 71.63 | 3.78 | 5.45 | 145 | 8.39 | 0.58 | 0.15 |
Interval 3 | 85.83 | 96.39 | 10.56 | 11.42 | 123 | 4.43 | 0.36 | 0.52 |
| | | | | | | | |
SM19-003 | | | | | | | | |
Interval 1 | 51.18 | 75.35 | 24.17 | 11.12 | 267 | 3.44 | 3.75 | 0.29 |
Including | 51.18 | 60.78 | 9.60 | 11.74 | 437 | 5.99 | 8.68 | 0.38 |
Including | 62.09 | 75.35 | 13.26 | 11.77 | 169 | 1.88 | 0.54 | 0.25 |
Interval 2 | 77.60 | 81.24 | 3.64 | 9.74 | 331 | 1.94 | 1.11 | 0.34 |
SM19-005 | 75.13 | 86.37 | 11.23 | 7.97 | 128 | 1.20 | 0.91 | 0.24 |
| | | | | | | | |
SM19-006 | 28.01 | 43.71 | 15.70 | 21.27 | 147 | 8.04 | 0.77 | 0.30 |
| | | | | | | | |
SM19-007 | 26.97 | 39.17 | 12.20 | 18.16 | 122.6 | 4.41 | 1.55 | 0.16 |
| | | | | | | | |
SM19-014 | | | | | | | | |
Interval 1 | 105.31 | 120.40 | 15.09 | 9.59 | 127.1 | 1.50 | 0.69 | 0.28 |
Interval 2 | 138.07 | 143.88 | 5.81 | 4.88 | 76.9 | 2.55 | 0.21 | 0.12 |
Interval 3 | 155.17 | 158.95 | 3.78 | 14.49 | 145.5 | 0.37 | 0.25 | 0.48 |
Interval 4 | 184.40 | 189.56 | 5.15 | 0.28 | 79.9 | 2.08 | 0.15 | 0.06 |
Interval 5 | 250.65 | 258.94 | 8.29 | 8.11 | 178.7 | 0.48 | 0.57 | 1.73 |
Interval 6 | 266.33 | 268.16 | 1.83 | 1.32 | 158.9 | 2.56 | 0.56 | 0.11 |
Texas Zone | | | | | | | | |
SM19-010 | | | | | | | | |
Interval 1 | 24.41 | 31.62 | 7.21 | 4.37 | 155.2 | 0.13 | 0.03 | 2.07 |
Interval 2 | 53.11 | 63.15 | 10.04 | 0.40 | 135.1 | 0.07 | 0.01 | 1.75 |
* Note: 1.00 meter (m) is equal to 3.28 feet (ft). One gram per tonne (g/t) is equal to 0.032 ounces per ton (oz/t, or o.p.t.)
Table 2 below shows the latest results received from holes SM19-016, SM19-017 and SM19-018.
Table 2. Drill Holes SM19-016, SM19-017 and SM19-018: Analytical and Assay Results
Drill Hole ID: Zone & Interval | From (m) | To (m) | Core Interval (m) | Zn % | Ag g/t | Au g/t | Pb % | Cu % |
DMEA Zone | | | | | | | | |
SM19-016 | | | | | | | | |
Interval 1 | 112.33 | 132.05 | 19.72† | 0.07 | 8.39 | 1.52 | 0.01 | 0.002 |
Interval 2 | 136.55 | 146.64 | 10.09 | 3.15 | 151.3 | 1.68 | 0.66 | 0.22 |
Interval 3 | 158.27 | 163.59 | 5.32† | 0.59 | 46.8 | 1.81 | 0.11 | 0.04 |
Interval 4 | 184.18 | 188.64 | 4.47† | 5.04 | 482.0 | 4.27 | 5.80 | 0.43 |
Interval 5 | 227.32 | 230.83 | 3.51 | 8.85 | 136.2 | 0.17 | 1.25 | 1.67 |
MB4 Target Zone | | | | | | | | |
SM19-017 | | | | | | | | |
Interval 1 | 1.37 | 5.23 | 3.86* | 12.90 | 314.1 | 0.26 | 0.88 | 1.08 |
Interval 2 | 16.32 | 24.08 | 7.76* | 10.23 | 91.4 | 0.07 | 0.36 | 0.55 |
SM19-018 | | | | | | | | |
Interval 1 | 0.00 | 18.62 | 18.62* | 5.15 | 73.2 | 0.11 | 0.02 | 0.41 |
Including | 8.53 | 18.62 | 10.09* | 8.06 | 97.0 | 0.15 | 0.02 | 0.68 |
Note: Reported widths in tables 1 & 2 are drilled core lengths as true widths are unknown at this time. It is estimated based upon current data that true widths might range between 60-80% of the drilled intersection. For drill holes SM19-017* and SM19-018* true widths are unknown as these are the first drill intersections of the MD4 target. Intervals cut offs are based upon visual contacts of massive sulfide units with no more than 1.75 meters of internal skarn. For SM19-010 a nominal 0.5% copper cut off has been applied to determine the boundaries of the intersections for this skarn hosted mineralization with no more than 1.4m of internal dilution. For SM19-016† (intervals 1, 3 and 4) a nominal 0.46 g/t gold cut off has been applied to determine the boundaries of the intersections with no internal dilution. For SM19-017 & 018 a nominal 2.4% zinc cut off has been applied to determine the boundaries of the intersections for this skarn hosted mineralization with no more than 2m of internal dilution. (Note: See details below in QA/QC section). 1.00 meter (m) is equal to 3.28 feet (ft). One gram per tonne (g/t) is equal to 0.032 ounces per ton (oz/t, or o.p.t.).
The above drill holes returned significant intersections of both massive sulfide and skarn styles of mineralization. Important sulfide minerals are pyrrhotite, sphalerite, galena, arsenopyrite and chalcopyrite. During the planned phase 3 campaign at South Mountain, the Company will carry out mineralogy and metallurgical test work studies to confirm historical other previous high-grade results, which will be included in the PEA.
Figure 1: 3D Perspective View inclined at 20 degrees looking north-north-east, showing locations of rib-sampling, priority target zones, and the phase 1 drill holes and highlighted the recent SM19-016, SM19-017 and SM19-018
Underground core drilling was conducted to extend and upgrade the South Mountain resource - testing the continuity and down-dip extensions of the high-grade polymetallic massive sulfide zones. The Company and BeMetals completed additional core drilling in the DMEA and Laxey zones to complete the confirmation and extensional drilling in 2021. The Company also retrieved bulk samples for metallurgical test work.
More than 15,000 feet (4,500 meters) have been drilled at South Mountain and included in the model. The South Mountain historic ore zones remain open down-dip on the zones encountered. The successful drilling and development work prove that the South Mountain resource continues to grow with potential to increase the resource substantially.
Figure 2: Plan View of the Sonneman & Laxey Levels, South Mountain Deposit,
showing locations of rib-sampling, priority target zones, and drill holes SM19-016, SM19-017 and SM19-018
Figure 3: Plan View of Sonneman & Laxey Levels,
showing locations of previously reported rib sampling
QUALITY ASSURANCE AND QUALITY CONTROL PROCEDURES
The project employs a rigorous QC/QA program that includes blanks, duplicates and appropriate certified standard reference material. All samples are introduced into the sample stream prior to sample handling/crushing to monitor analytical accuracy and precision. The insertion rate for the combined QA/QC samples is 10 percent or more depending upon batch sizes. ALS Global completed the analytical work with the core samples processed at their preparation facility in Reno, Nevada, U.S.A. All analytical and assay procedures are conducted in the ALS facility in North Vancouver, BC. The samples are processed by the following methods as appropriate to determine the grades; Au-AA23-Au 30g fire assay with AA finish, ME-ICP61-33 element four acid digest with ICP-AES finish, ME-OG62-ore grade elements, four acid with ICP-AES finish, Pb-OG62-ore grade Pb, four acid with ICP-AES finish, Zn-OG62-ore grade Zn, four acid digest with ICP-AES finish, Ag-GRA21-Ag 30g fire assay with gravimetric finish.
Gold Breccia Target
In 2010, five holes were drilled by Thunder Mountain Gold in the Gold Breccia anomaly for a total footage of 3,530 feet, and 705 total samples taken every five feet of drill hole. Of the 705 samples taken, 686 samples contained anomalous gold, or 97% of the samples. The highest-grade intercept ran 0.038 ounce per ton. HRC reviewed the reports done on the breccia completed by both Kinross and Newmont; of note was Newmont's comparison of the geology to the Battle Mountain Complex in Nevada.
The Technical Report was authored by Ms. J.J. Brown, P.G., SME-RM, Mr. Jeffrey Choquette, P.E., and Mr. Randy Martin, SME-RM, all of Hard Rock Consulting, each of whom is an independent qualified person for the purposes of NI 43-101 The NI 43-101 Technical Report has an effective date of April 7, 2018, and has been filed in Canada on SEDAR in accordance with NI 43-101. The Report can be reviewed on the Company`s website at www.thundermountaingold.com.
Note to United States investors concerning estimates of measured, indicated and inferred resources.
Information concerning our mining properties has been prepared in accordance with the requirements of subpart 1300 of Regulation SK, which first became applicable to us for the fiscal year ended December 31, 2021. These requirements differ significantly from the previously applicable disclosure requirements of SEC Industry Guide 7. Among other differences, subpart 1300 of Regulation S-K requires us to disclose our mineral resources, in addition to our mineral reserves, as of the end of our most recently completed fiscal year both in the aggregate and for each of our individually material mining properties. You are cautioned that mineral resources do not have demonstrated economic value. Mineral resources are subject to further exploration and development, are subject to additional risks, and no assurance can be given that they will eventually convert to future reserves. Inferred Resources, in particular, have a great amount of uncertainty as to their existence and their economic and legal feasibility. Investors are cautioned not to assume that any part or all of the Inferred Resource exists or is economically or legally mineable. See Item 1A, Risk Factors.
Disclosure of the NI-43-101 has been prepared in accordance with the requirements of Canadian securities laws, including Canadian National Instrument 43-101 ("NI 43-101"). The Highlights of South Mountain NI-43-101 section refers to "mineral resources," "measured mineral resources," "indicated mineral resources," and "inferred mineral resources."
Qualified Person - The technical information in this Form 10K has been reviewed and approved by Larry D. Kornze, (Retired) , Qualified Person, and Director of Thunder Mountain Gold Inc., and a "Qualified Person" as defined by National Instrument 43-101 standards.
This property is without known reserves and the proposed program is exploratory in nature according to Instruction 3 to paragraph (b)(5) of the SEC`s Industry Guide 7. There are currently no permits required for conducting exploration in accordance with the Company`s current board approved exploration plan.
Trout Creek Project, Lander County, Nevada
The Trout Creek project is a highly prospective gold exploration target located along the western flank of the Shoshone Mountain Range in the Reese River Valley in Lander County, Nevada. The Project is located approximately 155 air miles northeast of Reno, Nevada, or approximately 20 miles south of Battle Mountain, Nevada, in Sections 10, 11, 14, 16, 21, 22, 27; T.29N.; R.44E. Mount Diablo Baseline & Meridian, Lander County, Nevada. Latitude: 40 23' 36" North, Longitude: 117 00' 58" West. The property is generally accessible year-round by traveling south from Battle Mountain Nevada on state highway 305, which is paved.
During the year ended December 31, 2021, the Company made the decision to retain 26 (approximately 520 acres) of the 87 unpatented lode mining claims in the Trout Creek area. The Company's 26 unpatented mining claims are staked along a recognizable structural zone in the Eureka-Battle Mountain mineralized gold trend. The Company paid annual fees to BLM of $4,290 and Lander County $324 fees.
The Trout Creek target is anchored by a regional gravity anomaly on a well-defined northwest-southeast trending break in the alluvial fill thickness and underlying bedrock. Previous geophysical work in the 1980s revealed an airborne magnetic anomaly associated with the same structure, and this was further verified and outlined in 2008 by Company personnel, with consultation from Jim Wright - Wright Geophysics using a ground magnetometer. The target is covered by alluvial fan deposits of generally unknown thickness, shed from the adjacent Shoshone Range, a fault block mountain range composed of Paleozoic sediments of both upper and lower plate rocks of the Roberts Mountains thrust.
Wright Geophysics also conducted a ground gravity survey and CSMAT over the pediment target area and this provided insight into the gravel-bedrock contact as well as defining the favorable structural setting within the buried bedrock. An untested drill target was identified under the gravel pediment along these structures, and the geophysics showed that the bedrock was within 500 feet of the surface, which is reasonable depth for exploration drilling and potential mining if a significant mineralization is encountered.
The Company does not plan to conduct any work on the Trout Creek Property in 2022, but instead will focus all of their efforts on their South Mountain Project.
There are currently no environmental permits required for the planned exploration work on the property. In the future, a notice of intent may be required with the Bureau of Land Management.
Competition
We are an exploration stage company. We compete with other mineral resource exploration and development companies for financing and for the acquisition of new mineral properties. Many of the mineral resource exploration and development companies with whom we compete have greater financial and technical resources than us. Accordingly, these competitors may be able to spend greater amounts on acquisitions of mineral properties of merit, on exploration of their mineral properties and on development of their mineral properties. In addition, they may be able to afford greater geological expertise in the targeting and exploration of mineral properties. This competition could result in competitors having mineral properties of greater quality and interest to prospective investors who may finance additional exploration and development. This competition could adversely impact on our ability to finance further exploration and to achieve the financing necessary for us to develop our mineral properties.
Employees
The Company employs three full-time officers. As part of the BeMetals agreement, the Company allowed these officers to work on the South Mountain Project on a consulting arrangement with BeMetals.
Results of Operations:
For the three months ended June 30, 2022, the Company recorded a net loss of $453,580, compared to net income of $191,542, for the same time ending June 30, 2021. Net Loss for the six-month period ended June 30, 2022 was $965,309 for the same period in 2021 the Net income was $142,320. The decrease in net income for 2022 is primarily due to a reduction in the market value of the Company's investment in BeMetals stock. For the three and six month periods ended June 31, 2022 the Company recognized an unrealized loss on the investment in BeMetals of $381,924 and $620,988, respectively. The Company recognized a gain of $163,507 and a loss of $71,011 for the three- and six-month periods ended June 30, 2021.
Three-month period comparisons
The Company recognized $75,000 in management services income for the three-month periods ended June 30, 2022, and 2021, respectively.
Operating expenses for the three months ending June 30, 2022, of $146,656 decreased from the same respective time period in 2021 by $1,520 or 1%. Exploration expenses for the three months ended June 30, 2021 decreased by $1,617 when compared to same period in 2021. Legal and accounting costs decreased in three-month period ended June 30, 2022 compared to 2021 by $18,152 for a total of $14,454. The decrease in Legal and accounting was associated to the early closing of the 10-K expenses for the year ended December 31, 2022 compared to 2021. Management and administrative expense increased by $18,536 or 17%. This increase in Management and administration cost was due to the Board of Directors compensation of $13,650 for the three months ended June 30, 2022. There were no stock options issued for the three months ended June 30, 2022 and 2021, respectively.
Six-month period comparisons
The Company recognized $150,000 in total revenue for the six-month period ended on June 30, 2022 compared with total revenue of $400,000 for the same period ended June 30, 2021, a decrease of $250,000 or 63%. Management services revenue from BeMetals remained the same at $75,000 in both quarters; however, for the quarter ended June 30, 2021 the Company recognized a $250,000 gain on the sale of mineral properties under the terms of the BeMetals Option Agreement. No gain was recognized for the same period in 2022. The final cash payment under the BeMetals Option Agreement was received in third quarter of 2021.
Operating expenses for the six months ending June 30, 2022, of $494,419 increased from the same respective time period in 2021 by $206,245 or 72%. Exploration expenses decreased by $5,462 or 71% when compared to same period in 2021. Legal and accounting costs increased by $30,585 or 56% for a total of $85,092. Management and administrative expense increased by $181,846 or 81% principally due to stock compensation of $158,341 for stock options issued to our officers and directors on March 21, 2022. There were no stock options issued during the six months ended June 31, 2021.
The consolidated financial statements for the six-months ended June 30, 2022 have been prepared under the assumption that we will continue as a going concern. Such assumption contemplates the realization of assets and the satisfaction of liabilities in the normal course of business. As shown in the consolidated financial statements as of June 30, 2022, we have sufficient cash reserves to cover normal operating expenditures for the following 12 months.
Liquidity and Capital Resources:
The consolidated financial statements for the year ended June 30, 2022 have been prepared under the assumption that we will continue as a going concern. Such assumption contemplates the realization of assets and the satisfaction of liabilities in the normal course of business. As shown in the consolidated financial statements for the three-month period ended June 30, 2022, we have sufficient cash reserves to cover normal operating expenditures for the following 12 months.
The liquidity of the Company was enhanced on February 27, 2019 when the Company entered the BeMetals Option Agreement with BeMetals Corp., and BMET USA, a wholly owned subsidiary of BeMetals. Under the terms of the BeMetals Option Agreement, BMET USA will be entitled to purchase 100% of the issued and outstanding shares of SMMI from TMRI, both wholly owned subsidiaries of the Company. The term of the agreement is for two years with BeMetals completing a preliminary economic assessment ("PEA") completed by a mutually agreed third-party engineering firm. Over its term, this agreement requires cash payments to the Company of $1,350,000; $1,100,000 in cash and $250,000 in exchange for shares of the Company's common stock. Through June 30, 2022, cash proceeds of $1,100,000 and $250,000 in exchange for shares of the Company's common stock have been received. BeMetals also agreed to pay the Company $25,000 per month for management services. In the event that BeMetals decides not to proceed with the South Mountain Project, BeMetals will not be obligated to make any additional payments.
The Company has historically incurred losses, however, under the BeMetals Option Agreement, the Company now has a recurring source of revenue, and its ability to continue as a going concern is no longer dependent on equity capital raises and borrowings. However, the Company believes it has the ability to raise capital in order to fund its future exploration and working capital requirements if necessary.
Potential additional sources of cash, include additional external debt, the sale of shares of our stock, or alternative methods such as mergers or sale of 8,000,000 BeMetals common stock shares held by the company. (See South Mountain Project above), No assurances can be given, however, that we will be able to obtain any of these potential sources of cash.
Our plans for the long-term continuation as a going concern include financing our future operations through sales of our common stock and/or debt and the potential exploitation of our mining properties. Our plans may also, at some future point, include the formation of mining joint ventures with senior mining company partners on specific mineral properties whereby the joint venture partner would provide the necessary financing in return for equity in the property. In addition to the BeMetals Corp. Option Agreement, we believe that the Company will be able to meet its financial obligations because of the following:
- On July 27, 2022, we had $896,360 cash in our bank accounts.
- We do not include in this consideration any option payments mentioned below.
- Management is committed to manage expenses of all types to not exceed the on-hand cash resources of the Company at any point in time, now or in the future.
- The Company will also consider other sources of funding, including potential mergers, the sale of all or part of the Company`s BeMetals Corp. (TSX-V: BMET) common shares beneficially held, and/or additional farm-out of its other exploration property.
For the six-month period ended June 30, 2022 the Company reported a net cash decrease of $270,455, compared to a net cash increase of $756,245 for the same period in 2021. The Company reported net cash used by operating activities of $232,455 compared to cash used by operating activities of $103,504 for the same period in 2021. The Company did not have any cash provided or used by investing for the period ended June 30, 2022 compared to cash provided by investing activities of $899,557 for the same period in 2021. In 2021 the Company received cash from investing activities of $250,000 from the sale of mineral interests forthe Tranche 5 payment, pursuant to the BeMetals Option Agreement, and $649,557 proceeds from sale of 2,000,000 shares of BeMetals common shares. The Company reported cash used in financing activities of $38,000 and $39,808 for the period ended June 30, 2022 and 2021, respectively, related to the repayment of related party notes payable to officer and directors of the Company.
Our future liquidity and capital requirements will depend on many factors, including timing, cost and progress of our exploration efforts, our evaluation of, and decisions with respect to, our strategic alternatives, and costs associated with the regulatory approvals. If it turns out that we do not have enough cash to complete our exploration programs, we will attempt to raise additional funds from a public offering, a private placement, mergers, farm-outs or loans.
Additional financing may be required in the future to fund our planned operations. We do not know whether additional financing will be available when needed or on acceptable terms, if at all. If we are unable to raise additional financing, when necessary, we may have to delay our exploration efforts or any property acquisitions or be forced to cease operations. Collaborative arrangements may require us to relinquish our rights to certain of our mining claims.
Contractual Obligations
During 2008 and 2009, three lease arrangements were made with landowners that own land parcels adjacent to the Company's South Mountain patented and unpatented mining claims. The leases were for a seven-year period, with options to renew, with annual payments (based on $20 per acre) listed in the following table. The leases have no work requirements.
Contractual obligations | | Payments due by period | |
| Total* | | | Less than 1 year | | | 2-3 years | | | 4-5 years | | | More than 5 years | |
Acree Lease (yearly, June)(1) | $ | 3,390 | | $ | 3,390 | | | - | | | - | | $ | - | |
Lowry Lease (yearly, October)(1)(2) | $ | 22,560 | | $ | 11,280 | | $ | 11,280 | | | - | | $ | - | |
OGT LLC(3) | $ | 25,000 | | $ | 5,000 | | $ | 10,000 | | $ | 10,000 | | $ | - | |
Total | $ | 50,950 | | $ | 19,670 | | $ | 21,280 | | $ | 10,000 | | $ | - | |
(1) Amounts shown are for the lease periods years 15 through 16, a total of 2 years that remains after 2021, the lease was extended an additional 10 years at $30/acre after 2014.
(2) The Lowry lease has an early buy-out provision for 50% of the remaining amounts owed in the event the Company desires to drop the lease prior to the end of the first seven-year period.
(3) OGT LLC, managed by the Company's wholly owned subsidiary SMMI, receives a $5,000 per year payment for up to 10 years, or until a $5 million capped NPI Royalty is paid.
Critical Accounting Policies We have identified our critical accounting policies, the application of which may materially affect the financial statements, either because of the significance of the financials statement item to which they relate, or because they require management's judgment in making estimates and assumptions in measuring, at a specific point in time, events which will be settled in the future. The critical accounting policies, judgments and estimates which management believes have the most significant effect on the financial statements are set forth below:
a) Estimates. Our management routinely makes judgments and estimates about the effect of matters that are inherently uncertain. As the number of variables and assumptions affecting the future resolution of the uncertainties increase, these judgments become even more subjective and complex. Although we believe that our estimates and assumptions are reasonable, actual results may differ significantly from these estimates. Changes in estimates and assumptions based upon actual results may have a material impact on our results of operation and/or financial condition.
b) Stock-based Compensation. The Company records stock-based compensation in accordance with ASC 718, "Compensation - Stock Compensation" using the fair value method. All transactions in which goods or services are the consideration received for the issuance of equity instruments are accounted for based on the fair value of the consideration received or the fair value of the equity instrument issued, whichever is more reliably measurable.
c) Income Taxes. We have current income tax assets recorded in our financial statements that are based on our estimates relating to federal and state income tax benefits. Our judgments regarding federal and state income tax rates, items that may or may not be deductible for income tax purposes and income tax regulations themselves are critical to the Company's financial statement income tax items.
d) Investments. In a joint venture where the Company holds more than 50% of the voting interest and has significant influence, the joint venture is consolidated with the presentation of non-controlling interest. In determining whether significant influences exist, the Company considers its participation in policy-making decisions and its representation on the venture's management committee.